Manual.ly Logo

Goodyear SUV 3T Manual

0.0 · 0 Ratings

PDF manual · 28 Pages

English

M: QW-35-FL
page

/ 28

Loading...
bb8470c49c6d5e1f32cf441a46337b9cabf3 page 5
1. Schmieren Sie den Druckstempel, die Verbindungsstellen, den Teller und
den Pumpmechanismus mit Leichtölen.
2. Führen Sie eine Sichtprüfung im Hinblick auf gerissene Schweißnähte,
verbogene, lose, fehlende Teile oder auf Lecks durch, aus denen
Hydrauliköl austritt.
3. Das Produkt muss unverzüglich überprüft werden, wenn Sie davon aus-
gehen, dass es ungewöhnlichen Lasten oder Stößen ausgesetzt wurde.
4. Jeder hydraulische Wagenheber, an dem Schäden oder Verschleiß-
erscheinungen festgestellt wurden, darf nicht weiter genutzt werden.
5. Reinigen Sie sämtliche Oberflächen und bewahren Sie sämtliche
Aufkleber und Warnhinweise auf.
6. Überprüfen und erhalten Sie den vorgesehenen Ölstand für den
Druckstempel.
7.
Überprüfen Sie den Druckstempel ca. alle drei Monate auf Hinweise von
Rost oder Korrosion. Reinigen Sie ihn und wischen Sie ihn mit einem öligen
Lappen ab, falls erforderlich. Wenn das Gerät nicht genutzt wird, sollte es
immer mit abgesenktem Sattel und Druckstempel gelagert werden.
Lagern Sie Ihren Wagenheber immer im vollständig abgesenkten Zustand.
Hierdurch tragen Sie dazu bei, dass sämtliche kritischen Bereiche gegen
Korrosion geschützt werden.
Verwenden Sie keine Brems- oder Getriebeflüssigkeiten oder reguläres
Motoröl, da hierdurch die Dichtungen beschädigt werden könnten. Kaufen
und verwenden Sie immer Produkte, die als Hydrauliköl für Wagenheber
gekennzeichnet sind.
1. Wir empfehlen, die Wartungsarbeiten auf einer ölundurchlässigen
Unterlage durchzuführen. Es ist darauf zu achten, dass kein Öl verschüttet
wird. Sollte versehentlich doch etwas Öl verschüttet werden, ist dieses
umgehend aufzunehmen und in dafür vorgesehenen Einrichtungen sicher
zu entsorgen.
2. Entfernen Sie die Inspektionsplatte.
3. Entfernen Sie die Verschlusskappe des Öleinfüllstutzens, während sich
der Wagenheber in der abgesenkten Position befindet. Bringen Sie den
Wagenheber in eine vertikale Position, wobei der Griffsockel nach unten
zeigt. Das Öl sollte auf einer Ebene mit der Unterseite der Öleinfüllöffnung
liegen. Füllen Sie nicht zu viel Öl in den Ölbehälter ein. Füllen Sie das Öl
immer mit neuem, sauberem Hydraulik-Öl für Wagenheber auf.
4.
Setzen Sie die Verschlusskappe des Öleinfüllstutzens und die Inspektions-
platte wieder ein.
5. Überprüfen Sie die Funktion des Wagenhebers.
6. Entlüften Sie ggf. das Hydrauliksystem.
ENTLÜFTEN DES HYDRAULIKSYSTEMS:
1. Drehen Sie das Ablassventil eine volle Umdrehung entgegen dem Uhr-
zeigersinn, um es zu öffnen.
2. Pumpen Sie acht volle Hübe mit dem Griff.
3. Drehen Sie das Ablassventil in Richtung des Uhrzeigersinns, um das
Ventil zu schließen.
4. Pumpen Sie mit dem Griff, bis der Druckstempel die maximale Höhe
erreicht und fahren Sie noch mit mehreren Pumpbewegungen fort, um
die im Druckstempel eingeschlossene Luft zu entfernen.
5. Drücken Sie sorgfältig und langsam die Verschlusskappe des Öleinfüll-
stutzens zusammen, um die eingeschlossene Luft herauszulassen.
Ölstand
prüfen
Fehlersuche
Gebrauchsanleitung
D
75518 Bed. A5_130411.indd 5 11.04.13 10:13

Chat with your Goodyear SUV 3T manual using AI

Get instant AI answers from your Goodyear SUV 3T manual

Ask anything about the Goodyear SUV 3T. Answers come from this manual, with the pages they are based on.

SUV 3T Maintenance Schedule

Remind me when maintenance is due
Quarterly
Check plunger for rust or corrosion

Inspect the pressure plunger approximately every three months. Clean and wipe with an oily cloth if necessary.

Before each use
Inspect jack for damage and leaks

Check for cracks, bent parts, missing components, oil leaks, and corrosion before every use. Do not use if damaged.

As needed
Lubricate moving parts

Apply light oil to the pressure plunger, joints, plate, and pump mechanism to ensure smooth operation.

As needed
Clean surfaces and preserve labels

Keep all external surfaces clean and ensure warning labels and notices remain legible and in good condition.

As needed
Check and top up hydraulic oil level

Verify oil level is even with the bottom of the filler opening. Use only new, clean hydraulic oil designated for jacks.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend SUV 3T?

Yes No

Frequently Asked Questions

A

The maximum load capacity is 3000 kg or 3.0 tons.

Is this answer helpful?

A

No, never use this jack to lift people. It is for vehicles only.

Is this answer helpful?

A

Use on a firm, level, and dry hard surface.

Is this answer helpful?

A

Inspect for leaks and corrosion every three months.

Is this answer helpful?

A

Use hydraulic oil only. Do not use engine oil.

Is this answer helpful?

A

Stop use immediately and collect the oil for disposal.

Is this answer helpful?

A

Store with the saddle fully lowered to prevent rust.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High 3000 kg capacity suitable for SUVs and light trucks
  • Complies with EN 1494/A1 2008 safety standard requirements
  • Includes clear safety warnings to prevent operator injury
  • Durable hydraulic system designed for repeated lifting use
  • Adjustable lifting height accommodates various vehicle ground clearance
VS

Disadvantages

  • Requires manual force over 400N, needing second person for safety
  • Strictly limited to private use with no professional application allowed
  • Maintenance required every three months to prevent corrosion issues
  • Cannot support heavy loads permanently without additional chassis stands
  • Must dispose of hydraulic oil at hazardous waste centers only
M: QW-35-FL

Product Specification

Type

Hydraulic Service Jack

Load Capacity

6,613.87 lbs

Lifting Height

7.48-21.06 in

M: QW-35-FL

Product Description

Goodyear SUV 3T Car Jack Overview

The Goodyear SUV 3T Car Jack is a robust hydraulic tool designed for safe vehicle lifting operations on private property.

This manual trolley jack, identified as model 10640, features a high nominal capacity of 3000 kg or 3.0 tons suitable for most SUVs. It strictly adheres to the EN 1494/A1 2008 safety standard for European markets. This compliance ensures reliability and safety during critical automotive maintenance tasks. Users must prioritize safety protocols when operating this heavy equipment to prevent serious accidents or material damage.

Safety measures are paramount with this device to protect the operator. The manufacturer states that they are not responsible for damages caused by ignoring specific operating instructions. Users must secure the vehicle completely before lifting by engaging the parking brake and using wheel chocks. The jack should never be used to support people vertically. Always use proper chassis stands under the vehicle to hold the load permanently. Working under an unsupported vehicle is strictly prohibited at all times. This prevents crushing injuries if the hydraulic system fails unexpectedly. Keep hands clear of hinges during lowering processes.

Operational conditions are specific and must be followed carefully. The jack requires a firm, level, and dry hard surface to function correctly. Uneven ground can cause dangerous slippage of the heavy load. The lifting height ranges from 190 mm to 535 mm depending on the saddle position setting. Manual force required exceeds 400 Newtons, so a second person is recommended for assistance. Ensure the vehicle does not move laterally during lifting. Center the load on the lifting plate to avoid structural damage to the car or jack mechanism. Do not move the vehicle while lifted.

Regular maintenance ensures longevity and consistent performance of the hydraulic system. Lubricate all mechanisms specifically with light hydraulic oil only. Inspect for leaks and corrosion on the pressure plunger every three months. If an oil leak occurs, stop use immediately to prevent environmental damage. Do not use regular engine oil as it damages seals quickly. Store the unit fully lowered to protect critical areas from rust accumulation. Always keep the manual for future reference and troubleshooting. Dispose of hydraulic fluid properly at hazardous waste collection centers to help the environment significantly.

Notes

Vent air from the system if necessary using pump actions. Check valves for proper seating to maintain pressure efficiency.

M: QW-35-FL

© Copyright 2026 Manual.ly