Manual.ly Logo

Goodyear SUV 3T Manual

0.0 · 0 Ratings

PDF manual · 28 Pages

English

M: QW-35-FL
page

/ 28

Loading...
bb8470c49c6d5e1f32cf441a46337b9cabf3 page 7
7
Dear Customer,
Appropriate use
Safety instructions
for car jacks
t
Instruction manual
Thank you for buying this trolley jack. Before putting it into operation and
using it, please carefully read the instructions for use and strictly follow
the notes therein. Following these instructions is necessary to prevent pos-
sible risks such as material damage and injuries.
Before using the floor jack, familiarise yourself with it and its functions so
that you can operate it correctly and above all safely. In case of uncertain-
ty and questions, please consult your dealer so that you can be told how to
operate it.
The manufacturer is not responsible for injuries and damage resulting from
these operating instructions being ignored.
Put these instructions on display so they can be read through later and
hand them out with the floor jack if you pass it onto other people.
This floor jack is only designed for lifting and lowering vehicles with a
maximum rated load of 3000 kg (3.0 t). The floor jack 10640 complies with
EN 1494/A1: 2008. Only for personal use. All other applications are prohibited.
1. Only use the car jack for its intended purpose.
2. Use the car jack exclusively for raising and lowering of vehicles. Never raise
people with the car jack!
3. Always be careful and attentive when handling the car jack. When attaching
and removing accessories, such as the lifting rod, pay attention to your
hands and fingers, as there is a risk of crushing.
4. Before lifting, secure the vehicle to be lifted against accidental rolling away.
Apply the parking brake and engage a gear. Lock the wheels that cannot be
lifted with suitable wedges.
5. The car jack is only intended for lifting and lowering the vehicle. Secure the
lifted vehicle against accidental lowering by using suitable chassis stands.
Do not work under the lifted load if it is not secured by suitable means.
6. The manual force to be applied is more than 400N, therefore we ask you to
enlist a second person for help.
7. Make sure that the lifted vehicle cannot move on the car jack.
8. Only use the car jack on a firm, level and dry surface. The load can easily slip
on unpaved, uneven or damp/wet surfaces.
9. Always support the vehicle in the middle section of the take-up stand.
10. Do not exceed the permissible nominal load! The load on the car jack must
not exceed 3.0 tons, as it may be damaged in the event of overloading (e.g.
overloading of the mechanical properties) and as a result personal safety
will no longer be guaranteed.
11. Ensure that the car jack is centrally located and stable with the load support
under the lifting point of the vehicle to be lifted. Only attach the car jack to
the lifting points marked by the vehicle manufacturer. Suitable adapters may
have to be used in order to avoid damage to the mounting points on the
vehicle. For more information, read the operating instructions for your
vehicle. Please contact an authorised specialist workshop if you have any
doubts concerning the correct mounting points on the vehicle.
12. When lifting and lowering, make sure that there are no pets, persons or body
parts in the area of the load arm, cylinder or mechanisms.
13. Never allow persons to be in or under the vehicle to be lifted when using the
car jack.
14. Ensure that no persons lean against the lifted vehicle.
15. Do not use the car jack outdoors in frost or rain.
75518 Bed. A5_130411.indd 7 11.04.13 10:13

Chat with your Goodyear SUV 3T manual using AI

Get instant AI answers from your Goodyear SUV 3T manual

Ask anything about the Goodyear SUV 3T. Answers come from this manual, with the pages they are based on.

SUV 3T Maintenance Schedule

Remind me when maintenance is due
Quarterly
Check plunger for rust or corrosion

Inspect the pressure plunger approximately every three months. Clean and wipe with an oily cloth if necessary.

Before each use
Inspect jack for damage and leaks

Check for cracks, bent parts, missing components, oil leaks, and corrosion before every use. Do not use if damaged.

As needed
Lubricate moving parts

Apply light oil to the pressure plunger, joints, plate, and pump mechanism to ensure smooth operation.

As needed
Clean surfaces and preserve labels

Keep all external surfaces clean and ensure warning labels and notices remain legible and in good condition.

As needed
Check and top up hydraulic oil level

Verify oil level is even with the bottom of the filler opening. Use only new, clean hydraulic oil designated for jacks.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend SUV 3T?

Yes No

Frequently Asked Questions

A

The maximum load capacity is 3000 kg or 3.0 tons.

Is this answer helpful?

A

No, never use this jack to lift people. It is for vehicles only.

Is this answer helpful?

A

Use on a firm, level, and dry hard surface.

Is this answer helpful?

A

Inspect for leaks and corrosion every three months.

Is this answer helpful?

A

Use hydraulic oil only. Do not use engine oil.

Is this answer helpful?

A

Stop use immediately and collect the oil for disposal.

Is this answer helpful?

A

Store with the saddle fully lowered to prevent rust.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High 3000 kg capacity suitable for SUVs and light trucks
  • Complies with EN 1494/A1 2008 safety standard requirements
  • Includes clear safety warnings to prevent operator injury
  • Durable hydraulic system designed for repeated lifting use
  • Adjustable lifting height accommodates various vehicle ground clearance
VS

Disadvantages

  • Requires manual force over 400N, needing second person for safety
  • Strictly limited to private use with no professional application allowed
  • Maintenance required every three months to prevent corrosion issues
  • Cannot support heavy loads permanently without additional chassis stands
  • Must dispose of hydraulic oil at hazardous waste centers only
M: QW-35-FL

Product Specification

Type

Hydraulic Service Jack

Load Capacity

6,613.87 lbs

Lifting Height

7.48-21.06 in

M: QW-35-FL

Product Description

Goodyear SUV 3T Car Jack Overview

The Goodyear SUV 3T Car Jack is a robust hydraulic tool designed for safe vehicle lifting operations on private property.

This manual trolley jack, identified as model 10640, features a high nominal capacity of 3000 kg or 3.0 tons suitable for most SUVs. It strictly adheres to the EN 1494/A1 2008 safety standard for European markets. This compliance ensures reliability and safety during critical automotive maintenance tasks. Users must prioritize safety protocols when operating this heavy equipment to prevent serious accidents or material damage.

Safety measures are paramount with this device to protect the operator. The manufacturer states that they are not responsible for damages caused by ignoring specific operating instructions. Users must secure the vehicle completely before lifting by engaging the parking brake and using wheel chocks. The jack should never be used to support people vertically. Always use proper chassis stands under the vehicle to hold the load permanently. Working under an unsupported vehicle is strictly prohibited at all times. This prevents crushing injuries if the hydraulic system fails unexpectedly. Keep hands clear of hinges during lowering processes.

Operational conditions are specific and must be followed carefully. The jack requires a firm, level, and dry hard surface to function correctly. Uneven ground can cause dangerous slippage of the heavy load. The lifting height ranges from 190 mm to 535 mm depending on the saddle position setting. Manual force required exceeds 400 Newtons, so a second person is recommended for assistance. Ensure the vehicle does not move laterally during lifting. Center the load on the lifting plate to avoid structural damage to the car or jack mechanism. Do not move the vehicle while lifted.

Regular maintenance ensures longevity and consistent performance of the hydraulic system. Lubricate all mechanisms specifically with light hydraulic oil only. Inspect for leaks and corrosion on the pressure plunger every three months. If an oil leak occurs, stop use immediately to prevent environmental damage. Do not use regular engine oil as it damages seals quickly. Store the unit fully lowered to protect critical areas from rust accumulation. Always keep the manual for future reference and troubleshooting. Dispose of hydraulic fluid properly at hazardous waste collection centers to help the environment significantly.

Notes

Vent air from the system if necessary using pump actions. Check valves for proper seating to maintain pressure efficiency.

M: QW-35-FL

© Copyright 2026 Manual.ly