Gloria KO2D Manual
PDF manual · 24 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Gloria KO2D manual using AI
Get instant AI answers from your Gloria KO2D manual
Ask anything about the Gloria KO2D. Answers come from this manual, with the pages they are based on.
KO2D Maintenance Schedule
Press and release the test button to verify proper operation of the circuitry, horn, and batteries.
Use compressed air or a vacuum on openings and wipe the outside with a damp cloth. Do not use detergents.
Ensure annual inspection and regular maintenance of combustion appliances and their chimneys/vents.
The manufacturer recommends replacing the alarm ten years from the install date.
Ask a Question
Do you recommend KO2D?
Yes NoFrequently Asked Questions
The Gloria KO2D is designed to detect carbon monoxide produced by combustion sources, such as boilers, gas fires, stoves, fireplaces, heaters, blocked flues, and vehicle exhaust. It does not detect smoke, flames, natural gas, or other gases.
Is this answer helpful?
The display shows detected carbon monoxide concentration in ppm. It can also show status messages: "Lb" for low battery, "Err" for a fault, and "End" when the detector has reached the end of its service life.
Is this answer helpful?
Move everyone to fresh air immediately. Open doors and windows if it is safe, turn off combustion appliances where possible, and do not re-enter if the alarm continues. Seek medical help for symptoms and contact emergency or qualified service personnel.
Is this answer helpful?
Test the detector weekly and after returning from an extended absence. Press and release the Test/Reset button. If the alarm does not sound correctly, or sounds weak or irregular, replace the detector.
Is this answer helpful?
Install it in rooms with fuel-burning appliances, 1 to 3 meters from the potential CO source. Add detectors in sleeping areas and on every home level. Place it at breathing height where appropriate and keep it accessible for testing.
Is this answer helpful?
Avoid garages, bathrooms, dusty spaces, insect-prone areas, strong airflow, direct sunlight, and locations near vents, windows, doors, cookers, or heating appliances. Do not place it where curtains, furniture, or other objects can block its openings.
Is this answer helpful?
Replace the detector ten years after installation. The display shows "End" and the yellow LED and audible alerts indicate end of life. Replace low batteries promptly and replace the entire detector if a persistent fault message appears.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Digital display shows carbon monoxide readings in ppm for quick status checks.
- Peak-value memory records the highest CO level measured since the last reset.
- 85 dB(A) audible alarm, red LED warning, and clear four-beep alarm pattern improve awareness.
- Suitable for homes, caravans, motorhomes, and boats, with two AA battery operation.
- Test/Reset control supports weekly checks and can acknowledge selected warning notifications.
Disadvantages
- Detects carbon monoxide only and does not detect smoke, fire, natural gas, or other toxic gases.
- Requires regular battery replacement and weekly manual testing for dependable operation.
- Digital readings may vary with environmental conditions and sensor tolerances.
- Not intended for industrial compliance monitoring or hazardous-area installation.
- Must be replaced after ten years, even if it appears to remain functional.
Product Specification
Type
Gas detector
Sensors
Carbon monoxide (CO)
Alarm zones
1
Standard
N/A
Power supply
Battery (1 x AA), permanently installed
Operating temperature
14°F to 113°F
Dimensions
2.83 x 4.57 x 1.57 in
Weight
5.86 oz
Special features
Siren (85 dBA)
Product Description
Gloria KO2D Carbon Monoxide Detector Manual
The Gloria KO2D Carbon Monoxide Detector is a battery-powered safety alarm designed to help households identify dangerous carbon monoxide levels from fuel-burning appliances. Carbon monoxide is colorless, odorless, and tasteless, making reliable detection especially important around boilers, stoves, fireplaces, portable heaters, and attached garages. This compact detector is suitable for homes, apartments, caravans, motorhomes, and boats.
Clear readings and practical alerts
A key advantage of the KO2D model is its digital display, which shows detected CO concentrations in parts per million (ppm). It also includes a peak-value memory, allowing users to review the highest recorded reading between 11 and 999 ppm since the memory was reset. This feature can be useful when investigating intermittent exposure or checking conditions after a suspected event.
When carbon monoxide is detected, the alarm uses a distinct pattern of four rapid beeps repeated every five seconds. A red LED flashes in sync with the audible warning, while the display shows the current CO reading. The alarm is rated at 85 dB(A) at three meters, providing a strong warning signal for occupied living spaces.
Everyday operation
The detector operates on two AA batteries and includes a Test/Reset button for regular function checks. Weekly testing is recommended to verify the alarm, electronics, and battery power. The same control can temporarily silence certain low-battery or end-of-life notifications, although batteries or the detector should always be replaced promptly when required.
The Gloria KO2D Carbon Monoxide Detector Manual highlights useful status messages on the display. "Lb" indicates low battery power, "Err" signals a fault, and "End" means the unit has reached the end of its service life. The detector is intended to be replaced ten years after installation, so recording the installation date is an important part of ongoing safety planning.
Placement matters
For effective protection, install a detector in rooms containing combustion appliances, while keeping it 1 to 3 meters away from the potential source. Additional alarms are recommended in sleeping areas and on every level of the home. Avoid humid bathrooms, garages, dusty locations, direct airflow, cooking appliances, and places where the unit may be blocked by furniture or curtains.
Important safety note
A CO alarm must never be ignored. If it sounds, move to fresh air, ventilate the area where safe to do so, and seek emergency assistance if symptoms or continued alarms occur. The KO2D detects carbon monoxide only. It does not replace smoke alarms, appliance servicing, adequate ventilation, or professional inspection of chimneys and fuel-burning equipment.
Note: Keep the detector clean using a soft cloth, vacuum, or dry compressed air. Do not use solvents, aerosols, paint, or cleaning chemicals near the sensor.
Search for 67,706 Manuals online
Type-in Brand or Model