Manual.ly Logo

Gloria FoamMaster Manual

0.0 · 0 Ratings

PDF manual · 24 Pages

English

M: QW-35-FL
page

/ 24

Loading...
fa7d5b02ff428a321c7fa1f0b1cf00209c47 page 16
l
Sproeivloeistoffen zijn in de praktijk meng-
sels van verschillende stoffen, waarvan al-
leen de fabrikant de samenstelling kent. De
gebruiker dient daarom met de fabrikant van
de vloeistof te overleggen of het apparaat
geschikt is voor een bepaalde vloeistof.
Voorzienbaar misbruik
l Het apparaat is
niet
geschikt voor:
- Mieren- en vloeizuren in iedere concen-
tratie.
- Zuren en logen in de onder "Toepassin-
gen" aangegeven soorten in hogere con-
centratie of als mengsel.
- Oliën en brandstof.
- Media, die aan de gebruikte kunststoffen
scheuren kunnen veroorzaken of bevorderen.
- Vloeistoffen met temperaturen boven
+ 40°C.
- Brandbare vloeistoffen.
- Zeer taaie, kleverige of sedimentvormende
vloeistoffen die niet volledig uit het appa-
raat geschud of gespoeld kunnen worden
(oliën en oliehoudende vloeistoffen).
l
Op verzoek stelt de fabrikant van het appa-
raat een gedetailleerde materiaalstukslijst
van het apparaat beschikbaar voor een
nauw keurige controle.
l
Bij eigenhandige veranderingen aan het ap-
paraat of bij niet-reglementair gebruik is de
fabrikant niet aansprakelijk voor de daaruit
resulterende schade.
Inbedrijfstelling
Schroef de sproeierbuis (F) vast aan het
scharnierstuk (E) .
l
Om te vullen, de ventieldevice (D) linksom-
draaiend uit het tank (L) schroeven.
l
De tank vullen; zie voor de max. te gebrui-
ken hoeveelheid vloeistof “Max. vulvolume“
onder Technische gegevens en de schaal-
verdeling op de tank.
l Schroef de ventieldevice (D)opnieuw vast en
pomp het apparaat met de pomphendel (B).
Hierbij letten op het veiligheids-/drukredu-
ceerventiel (C). De hoogste druk is bereikt
wanneer het veiligheids-/drukreduceerven-
tiel wordt geactiveerd. Eventuele overdruk
ontsnapt via het veiligheids-/drukreduceer-
ventiel.
l
Door de
activeringsknop (A)
op de ventielde-
vice in te drukken wordt het sproeiproces ge-
activeerd. Het loslaten van de
activerings-
knop (A)
zorgt voor een onmiddellijke on-
derbreking van het sproeiproces
.
1
Volg daarom de volgende veiligheidsaanwij-
zingen op:
-
Voor ieder gebruik het apparaat op een
correcte staat en lekkage controleren.
De veiligheids-/drukreduceerventiel (C)
met de hand aan de knop omhoogtrekken
en controleren of de meter in de uitgangs-
positie terugkeert.
- Het apparaat uitsluitend rechtopstaand
gebruiken of verplaatsen.
- Controleer de goede bevestiging van alle
schroefverbindingen.
WAARSCHUWING!
Gevaar voor de gezondheid door contact
met de reinigingsvloeistof!
Let op de max. vulhoeveelheid (zie technische
gegevens) en de juiste dosering van het
sproeimiddel van de fabrikant.
NL
22
NL
WAARSCHUWING!
Gevaar voor de gezondheid door
uitlopende reinigingsvloeistof!
Een ondicht apparaat of ondichte apparaatde-
len kunnen ertoe leiden dat reinigingsvloei-
stof uitloopt of er uitspuit.
FM10_flex.qxp_Innenseiten_FM10 flex.qxd 08.02.18 16:29 Seite 22

Chat with your Gloria FoamMaster manual using AI

Get instant AI answers from your Gloria FoamMaster manual

Ask anything about the Gloria FoamMaster. Answers come from this manual, with the pages they are based on.

FoamMaster Maintenance Schedule

Remind me when maintenance is due
Every 2 years
Professional inspection

Have a specialist or manufacturer service station check the sprayer for safe operation, especially if safety defects appear.

After every use
Empty and rinse

Empty the tank completely and rinse the unit thoroughly after each use to prevent corrosion and residue buildup.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend FoamMaster?

Yes No

Frequently Asked Questions

A

The maximum filling volume is 5.0 liters. However, the total capacity of the device is approximately 12.2 liters. Do not exceed the 5.0-liter limit to prevent pressure issues.

Is this answer helpful?

A

No, the Gloria FoamMaster FM50 is strictly prohibited from being used with flammable liquids, oils, fuels, or media that could cause cracks in the plastic components. Using it for these substances poses a severe fire and explosion risk.

Is this answer helpful?

A

It is recommended to have the pressure sprayer undergo a thorough inspection every two years. For safety reasons, it should also be checked before each use for visible damage or leaks.

Is this answer helpful?

A

The device is equipped with a safety pressure relief valve. If the pressure reaches the maximum limit of 3 bar, the valve will activate to vent any excess pressure, preventing damage to the unit.

Is this answer helpful?

A

You can adjust the degree of foaming by turning the handwheel on the pressure reducing valve (C). Turning clockwise increases pressure and foam, while turning counter-clockwise decreases them.

Is this answer helpful?

A

No, the unit should not be left under pressure for extended periods. You must empty and rinse the sprayer after every use to ensure safety and prevent material fatigue.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Durable construction with polyethylene tank and polypropylene pump resistant to chemicals
  • Adjustable pressure reducer allows precise control over foam density and spray pressure
  • High delivery rate of 290ml/min ensures efficient coverage during cleaning tasks
  • Integrated compressor connection (D) offers versatile power options for rapid repressurization
  • Safety relief valve prevents dangerous overpressure situations by venting excess air at 3 bar
VS

Disadvantages

  • Not suitable for use with flammable liquids, oils, fuels, or aggressive acids like formic acid
  • Requires regular manual inspection every two years to maintain safety compliance and warranty
  • Cannot be used for storing liquids; must be emptied and rinsed thoroughly after every single use
  • Pump assembly requires specific 180-degree rotation steps for removal which may confuse new users
  • Maximum operating temperature limit of +40°C restricts usage in hot environments or direct sunlight
M: QW-35-FL

Product Description

Gloria FoamMaster Pressure Sprayer Manual: A Comprehensive Guide to Professional Cleaning

The Gloria FoamMaster FM50 is a robust industrial pressure sprayer designed specifically for the efficient foaming of liquid cleaning agents. Whether you are managing large-scale facility maintenance or handling demanding professional cleaning tasks, this manual provides the essential knowledge to operate the device safely and effectively. The unit features a high-capacity 5-liter filling volume within a total capacity of approximately 12.2 liters, making it ideal for extended use without frequent refills.

Constructed with durable materials, the tank is made of polyethylene while the pump utilizes polypropylene, ensuring resistance against corrosion and chemical degradation. The device operates at a maximum overpressure of 3 bar and can withstand temperatures up to +40°C. Its flat spray nozzle delivers a precise 110-degree pattern, allowing for controlled application of cleaning solutions. The inclusion of an adjustable pressure reducer with a manometer gives users full control over the spraying process and foam density.

Safety is paramount in the design of the Gloria FoamMaster. The manual emphasizes strict adherence to safety protocols, including the use of personal protective equipment when handling hazardous substances. It explicitly warns against using the sprayer for flammable liquids, acids, or oils that could damage the internal components. Regular maintenance, such as checking the safety relief valve and lubricating the pump O-ring, is crucial for longevity. By following the detailed instructions found in this guide, operators can ensure a safe working environment and maximize the performance of their cleaning operations.

M: QW-35-FL

© Copyright 2026 Manual.ly