Manual.ly Logo

Gastroback 42623 Design Espresso Barista Touch Manual

0.0 · 0 Ratings

PDF manual · 39 Pages

English

M: gpt-5.6-terra
page

/ 39

Loading...
7c47b7b4a0977bec3161b5b424c5142d985a page 12
EN EN
34 35
NOTE
You may use a sufficient caraffe for filling the water tank, while the water tank is
still mounted at the appliance. For this, pull the tank lid completely upwards and
fold it back. With this method, avoid spilling the water on the machine. Prefer
removing the water tank for filling.
1. Grasp the water tank at both sides and pull it vertically upwards. Alternatively,
you may pull the water tank out via the tank lid.
2. Fold back the tank lid and empty any residues of water. Rinse the water tank
with fresh tap water. Then fill in clear, cold drinking water (see: ‘Properties of
Your Espresso Machine / The Required Water Quality’). If required, wipe dry
the exterior of the water tank.
3. Hold the water tank at the tank lid and slide the water tank vertically down at
the rear of the appliance. Close the tank lid.
FILLING THE BEAN HOPPER
CAUTION – Fill the bean hopper with dry, whole, and freshly roasted cof-
fee beans only. Grounded coffee, instant coffee, caramelized or moist coffee
beans and any other objects may damage the grinder. After filling, the hopper lid
must be closed correctly.
Remove the hopper lid and fill up to 220 g dry, whole coffee beans into the bean
hopper. Thereafter, close the bean hopper via the hopper lid.
EMPTYING THE DRIP TRAY
At least, when the red filling indicator comes up at the metal grid, empty the drip
tray to avoid overflow.
IMPORTANT - When the appliance has been in operation just before, the water
in the drip tray may be hot. Additionally, the content of the drip tray may easily
be spilled, when the drip tray is overfilled.
1. Grasp the drip tray at the front and pull it out carefully.
2. Remove the metal grid and the red filling indicator and empty the drip tray. If
required, rinse the drip tray with clear tap water. Then wipe dry the exterior of
the drip tray.
3. Replace the filling indicator onto the post at the left side of the drip tray and turn
the filling indicator until it slides completely down. Replace the metal grid. When
the drip tray is installed, the three wide holes in the metal grid must face to the
left rear side of the machine. Ensure that the metal grid is lying stably.
4. Replace the drip tray. It may not protrude the base of the appliance. If required,
slightly push the drip tray in.
PREPARING THE APPLIANCE FOR OPERATION
1. Ensure that the water tank is filled with a sufficient amount of cold water. Ensure
that the drip tray is empty and correctly in place (see: ‘Filling the Water Tank’
and ‘Emptying the Drip Tray’). If you wish to operate the grinder, ensure that a
sufficient amount of whole coffee beans is in the bean hopper (see: ‘Filling the
Bean Hopper’).
2. Connect the espresso machine to a sufficient wall power outlet (see: ‘Important
Safeguards for Electrical Appliances’).
WARNING – During the start procedure, hot water is given off via the
group head. Do not hold your hands and arms under the group head.
3. Press the on/off button. The power button flashes and a message is shown:
“Turning on the machine”. Wait until the home page is displayed on the screen
(see: ‘Design of the Screen-Based Control’). The start procedure will take max.
1 minute.
NOTE
When the machine is switched on for the very first time, it must be prepared for
operation first. Let the machine guide you through this process (see: ‘Before First
Use’).
NOTE
When the machine is switched on, the warming plate on top of the appliance is
heated. We recommend to use this feature for warming your cups and thus kee-
ping your beverages hot.
MAKING COFFEE
NOTE
For all coffee-based drinks espresso is required. Hot milk and textured milk should be
made thereafter, because the temperature of the water system for this task is signi-
ficantly higher than the correkt coffee temperature. To avoid that the coffee will be
burnt after texturing milk, the appliance cools down the water system automatically.

Chat with your Gastroback 42623 Design Espresso Barista Touch manual using AI

Get instant AI answers from your Gastroback 42623 Design Espresso Barista Touch manual

Ask anything about the Gastroback 42623 Design Espresso Barista Touch. Answers come from this manual, with the pages they are based on.

42623 Design Espresso Barista Touch Maintenance Schedule

Remind me when maintenance is due
Daily
Empty and refill water tank

Empty and refill the water tank at least daily to ensure fresh water quality and prevent stagnation.

Monthly
Descaling cycle

Run the descaling cycle approximately every two weeks or at the latest when the message appears to prevent damage from lime deposits.

Every 2 months
Change water filter

Replace the water filter every two months for daily use or every three weeks for rare use to protect the water system from scale and particles.

Show in the manual (page 13)
After each use
Clean steam wand

Wipe the steam wand with a moist cloth after every use to remove milk residues and prevent clogging.

Show in the manual (page 23)
After each extraction
Purge group head

Give off hot water via the group head after each extraction to remove coffee powder residues from the shower screen.

Show in the manual (page 22)
When indicator rises
Empty drip tray

Empty the drip tray when the red filling indicator appears to avoid overflow and potential hazards.

Show in the manual (page 18)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend 42623 Design Espresso Barista Touch?

Yes No

Frequently Asked Questions

A

It offers espresso, espresso pod, cafe crema, Americano, espresso macchiato, cappuccino, latte macchiato, milk coffee, flat white, and hot milk. It also dispenses hot water at settings intended for white, green, oolong, and black tea.

Is this answer helpful?

A

Yes. The integrated grinder processes dry whole coffee beans directly into the filter basket. You can also fill a suitable filter basket with espresso-ground coffee manually. The dedicated pod filter is intended only for a single E.S.E. espresso pod.

Is this answer helpful?

A

The machine provides 12 memory spaces for personal drink profiles. You can save adjusted settings such as coffee quantity, beverage volume, and milk foam level, and you can also define new default settings.

Is this answer helpful?

A

Yes. The hot-water function provides separate temperature settings for white tea at about 65 C, green tea at about 75 C, oolong tea at about 80 C, and black tea at about 85 C.

Is this answer helpful?

A

The removable water tank holds from 0.5 to 2.5 liters. Use fresh, cold drinking water and keep the level between the minimum and maximum markings. Low-mineral still water may reduce limescale buildup.

Is this answer helpful?

A

Clean the steam wand after use, empty the drip tray as needed, and regularly clean the brew head, filter holder, and grinder. Use the built-in cleaning and descaling programs, replace the water filter as recommended, and respond promptly to descaling reminders.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Touchscreen interface guides drink preparation, settings, cleaning, and maintenance.
  • Pre-programmed coffee, milk, tea, and hot-water options support varied daily drinks.
  • Integrated adjustable grinder accepts whole beans; the machine also supports ground coffee and E.S.E. pods.
  • Customizable dose, volume, foam level, and coffee temperature can be saved in up to 12 profiles.
  • Large 2.5-liter water tank, cup warmer, steam wand, and guided cleaning functions improve convenience.
VS

Disadvantages

  • Milk frothing requires manual handling of the steam wand and a suitable metal milk pitcher.
  • The machine cannot grind, brew, and dispense steam or hot water at the same time.
  • Regular cleaning, filter replacement, and descaling are essential, especially with hard water.
  • Hot water, pressurized steam, portafilter, and brew head require careful handling to avoid burns.
M: gpt-5.6-terra

Product Specification

Design

Thermoblock

Power

1,600 W

Color

silver

Pump pressure

217.56 psi

Coffee system

Coffee beans, ground coffee, E.S.E. coffee pods

Milk system

no

Grinder

Conical grinder (11 settings)

Brewing temperature

adjustable (4 settings)

Water tank capacity

84.54 fl oz

Bean container capacity

7.76 oz

Special features

2-cup function, steam nozzle, hot water function, pre-brewing system, removable water tank, heated cup tray

Smart home

no

Dimensions

11.34 x 15.55 x 12.01 in (W x H x D)

Weight

18.3 lb

M: gpt-5.6-terra

Product Description

Gastroback 42623 Design Espresso Barista Touch - Read, Download & Print Free

The Gastroback 42623 Design Espresso Barista Touch is a versatile home espresso machine designed for coffee enthusiasts who want barista-style control with an approachable touchscreen experience. Its durable construction, integrated grinder, steam wand, and intuitive drink selection make it suitable for preparing a broad range of hot beverages in a modern kitchen.

Coffee, Milk, and Tea in One Machine

A key strength of this model is its selection of pre-programmed drinks. Users can choose from espresso, cafe crema, Americano, espresso macchiato, cappuccino, latte macchiato, flat white, milk coffee, and hot milk. It also provides dedicated hot-water settings for white, green, oolong, and black tea. Each tea option uses an appropriate temperature, helping preserve flavor without requiring a separate kettle.

The built-in grinder holds up to 220 g of whole beans and delivers ground coffee directly into the portafilter. Its grind setting is continuously adjustable, while the dose can be tailored to one or two cups. The machine also supports pre-ground espresso coffee and E.S.E. espresso pods through the matching filter basket, offering flexibility for different routines and preferences.

Touchscreen Control and Personal Settings

The responsive touchscreen guides users through drink selection, brewing, grinding, milk frothing, cleaning, and maintenance. It provides practical prompts for preparation steps, filter selection, water levels, and troubleshooting. Four coffee temperature ranges are available, while beverage volume, grinding dose, and milk foam level can be adjusted to suit individual taste.

Personalization goes further with memory functions. Alongside its factory drink options, the Gastroback 42623 can retain new standard settings and up to 12 custom profiles. This makes it convenient for households where several people enjoy different coffee strengths, cup sizes, or milk textures.

Designed for Daily Use

The machine has a removable 2.5-liter water tank, cup-warming surface, detachable drip tray with level indicator, and a swiveling steam wand. With up to 15 bar pressure and 1600 W maximum power, it is built to produce espresso with pre-infusion, allowing coffee grounds to bloom before full extraction. This supports richer aroma and more balanced results.

Maintenance is integrated into the interface. Guided programs help clean the brew head, portafilter, steam wand, and water system. A water filter can reduce limescale and particles, while water-hardness settings help identify when descaling is needed.

Notes

For best results, use fresh cold water, dry whole coffee beans, and preheated cups. Clean the steam wand after every use, empty the drip tray regularly, and follow descaling reminders to protect performance over time.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly