Manual.ly Logo

Futurelight EYE-19 HCL Zoom Manual

0.0 · 0 Ratings

PDF manual · 52 Pages

English

M: QW-35-FL
page

/ 52

Loading...
cbdc33d3737937a4c10586d06a8d7f643cbb page 32
00123553.DOCX, Version 1.0
50/52
Error Messages
When you turn on the fixture, it will make a reset first. The display may show an error message while
there are problems with one or more channels. The error message stands for the channels equipped
with a testing sensor.
For example, when the display shows “Err channel PAN”, it means there is some error in the
horizontal movement (PAN), control-channel 1. If there are some errors on several channels at the
same time, you may see the error messages flash repeatly for 2 times, and then the fixture will
generate a reset signal, all the stepper motors will reset. If the error messages maintain after
performing reset more than 2 times, only the channels which have errors can not work properly,
others can work as usual.
The respective error message will appear after the reset of the fixture if the channels magnetic-indexing
circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on
the main PCB). The channel feature is not located in the default position after the reset.
The different error messages are:
PAN TILT Zoom
CLEANING AND MAINTENANCE
The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1 Disconnect the device from power and allow it to cool before cleaning.
2 Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3 The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1 Disconnect the device from power and allow it to cool.
2 Open the fuse holder of the mains connection with a fitting screwdriver.
3 Remove the old fuse from the fuse holder and replace it with a new fuse.
4 Carefully push the fuse holder back into its position before reapplying power.
PROTECTING THE ENVIRONMENT
Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a
disposal which is not harmful to the environment. Devices marked with this symbol must not be
disposed of as household waste. Contact your retailer or local authorities for more information.
Remove any inserted batteries and dispose of them separately from the product.
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited. You may return
your used batteries free of charge to collection points in your municipality and anywhere where
batteries/rechargeable batteries are sold. By disposing of used devices and batteries correctly,
you contribute to the protection of the environment.

Chat with your Futurelight EYE-19 HCL Zoom manual using AI

Get instant AI answers from your Futurelight EYE-19 HCL Zoom manual

Ask anything about the Futurelight EYE-19 HCL Zoom. Answers come from this manual, with the pages they are based on.

EYE-19 HCL Zoom Maintenance Schedule

Periodically
Clean the device surface and lenses

Remove dust from the outside and clean lenses with a soft, lint-free, moistened cloth. Never use alcohol or solvents. Disconnect power and let cool before cleaning.

Show in the manual (page 50)
Periodically
Inspect rigging hardware for wear

After installation, inspect the device periodically to prevent rot, deformation, and looseness of the mounting structure and safety bonds.

Show in the manual (page 33)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend EYE-19 HCL Zoom?

Yes No

Frequently Asked Questions

A

No. This device is designed for indoor use only. Exposure to rain, moisture, or outdoor weather conditions can damage the internal electronics and invalidate the warranty. Keep it away from water sources.

Is this answer helpful?

A

Use the Control Board located on the front. Navigate the menu using arrow keys to select DMX Address, then use the buttons to set the starting channel. Press Enter to confirm the changes.

Is this answer helpful?

A

The pan angle is switchable. You can choose between 540 degrees and 630 degrees using the settings menu. This flexibility allows adaptation to different truss types and venue requirements.

Is this answer helpful?

A

Yes. The unit supports Standalone mode and Music mode. You can run internal programs or activate effects using the built-in microphone without connecting to a computer or controller.

Is this answer helpful?

A

Wireless operation is available with an optional receiver module. Ensure you install the Futurelight WDR-G4 receiver to enable wireless DMX control from a compatible transmitter.

Is this answer helpful?

A

You can power up to eight devices from a single outlet using the Power Out feature. Connect the Power Out to the Power In of the next unit in the chain for daisy-chaining.

Is this answer helpful?

A

The unit weighs 12.5 kg. This requires a sturdy mounting structure capable of handling significant weight. Always use recommended Omega clamps and safety cables for securing the unit.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High color rendering index above 90 ensures accurate color representation on stage.
  • Zoom range of 6 to 52 degrees offers versatile beam shaping capabilities.
  • Supports 4 different DMX channel modes for flexible control configurations.
  • Built-in microphone enables music mode operation without external lighting desk.
  • Wireless receiver option available to reduce DMX cable clutter effectively.
VS

Disadvantages

  • Designed for indoor use only, exposure to moisture causes severe damage.
  • Heavy weight of 12.5 kg requires robust overhead rigging structures.
  • Requires secondary safety line when installed above audience areas strictly.
  • No direct weather protection limits outdoor deployment options significantly.
  • Maintenance requires professional service to prevent safety risks.
M: QW-35-FL

Product Specification

Beam Pattern

Wash

Light Source

LED

Power Consumption

300W

Beam Angle

6-52°

PAN Angle

630°

TILT Angle

265°

Color Mixing

LED (RGBW)

Effects

Dimmer, Strobe (18Hz), Zoom (motorized)

Control

DMX (33 Channels), RDM, Music Control, Master/Slave

Dimensions

9.84x18.03x13.46 in (WxHxD)

Weight

31.75 lbs

M: QW-35-FL

Product Description

Futurelight EYE-19 HCL Zoom LED Moving-Head Wash Review

The Futurelight EYE-19 HCL Zoom LED Moving-Head Wash represents a significant leap in professional stage lighting technology. Designed for high-performance venues, this fixture utilizes advanced 6in1 COB LED technology to deliver vibrant, flicker-free illumination. With a high color rendering index exceeding 90, colors appear true and rich on stage. The 19 x 17-watt LEDs provide ample power while maintaining energy efficiency. A standout feature is the extensive zoom range from 6 to 52 degrees, allowing operators to switch from tight beams to wide washes seamlessly.

Control is flexible with selectable DMX channel modes including 16, 19, 20, or 33 channels. This ensures compatibility with various lighting consoles and setups. The motorized movement offers precise positioning via 16-bit resolution for smooth pans and tilts. Users can choose between 540 and 630-degree pan angles to suit different trussing requirements. Internal programs and sound activation via the built-in microphone offer standalone functionality for DJs or smaller gigs without a full lighting desk.

The integrated Control Board simplifies setup with a graphic LCD and foil keypad. Operators can adjust settings like DMX start addresses, reverse movement directions, and hibernation timers. Support for RDM adds convenience for remote diagnostics and address setting on hard-to-reach fixtures. Scene recording allows users to save complex sequences directly to the unit, reducing reliance on external controllers during playback.

Safety warnings emphasize indoor use only due to potential water damage risks. Operating temperatures must remain manageable to prevent overheating, which is mitigated by an intelligent fan system with selectable speeds. The device supports wireless DMX operation with an optional receiver module, reducing cable clutter significantly. Maintenance is straightforward, requiring only surface cleaning with a damp cloth. Avoid solvents to prevent cosmetic damage. Technical data specifies a weight of 12.5 kg and supports standard XLR connections. The power feed-through feature allows up to eight devices to be daisy-chained from a single outlet. Ultimately, the system balances robust build quality with intuitive user controls for professional applications ranging from concerts to theatrical productions. Whether for dynamic washes or precise accent lighting, the EYE-19 proves to be a versatile tool for modern event production teams. Rigging professionals must adhere to strict safety protocols. Secondary securing systems are required for overhead installations. Do not remove the serial number label to maintain warranty validity. Always ensure the cooling vents remain unobstructed. This ensures longevity through reduced thermal stress.

Important User Notes

Always inspect rigging equipment before installation. Ensure the area below is clear during operation. Check cabling for damage daily. Keep the unit away from direct sunlight and moisture.

M: QW-35-FL

© Copyright 2026 Manual.ly