Manual.ly Logo

Futurelight DSC-60 Manual

0.0 · 0 Ratings

PDF manual · 48 Pages

English

M: OA-GPT-54-NAN
page

/ 48

Loading...
56502c8310e616264bebf8b03847edb756fb page 17
00078096.DOC, Version 1.0 23/48
REINIGUNG UND WARTUNG
Der Unternehmer hat dafür zu sorgen, dass sicherheitstechnische und maschinentechnische Einrichtungen
mindestens alle vier Jahre durch einen Sachverständigen im Umfang der Abnahmeprüfung geprüft werden.
Der Unternehmer hat dafür zu sorgen, dass sicherheitstechnische und maschinentechnische Einrichtungen
mindestens einmal jährlich durch einen Sachkundigen geprüft werden.
Dabei muss unter anderem auf folgende Punkte besonders geachtet werden:
1) Alle Schrauben, mit denen das Gerät oder Geräteteile montiert sind, müssen fest sitzen und dürfen nicht
korrodiert sein.
2) An Gehäuse, Befestigungen und Montageort (Decke, Abhängung, Traverse) dürfen keine Verformungen
sichtbar sein.
3) Mechanisch bewegte Teile wie Achsen, Ösen u. Ä. dürfen keinerlei Verschleißspuren zeigen (z.B.
Materialabrieb oder Beschädigungen) und dürfen sich nicht unwuchtig drehen.
4) Die elektrischen Anschlussleitungen dürfen keinerlei Beschädigungen, Materialalterung (z.B. poröse
Leitungen) oder Ablagerungen aufweisen. Weitere, auf den jeweiligen Einsatzort und die Nutzung
abgestimmte Vorschriften werden vom sachkundigen Installateur beachtet und Sicherheitsmängel
behoben.
Vor Wartungsarbeiten unbedingt allpolig vom Netz trennen!
LEBENSGEFAHR!
Das Gerät sollte regelmäßig von Verunreinigungen wie Staub usw. gereinigt werden. Verwenden Sie zur
Reinigung ein fusselfreies, angefeuchtetes Tuch. Auf keinen Fall Alkohol oder irgendwelche Lösungsmittel
zur Reinigung verwenden!
Die Linse muss gewechselt werden, wenn diese sichtbar beschädigt ist,
so dass ihre Wirksamkeit beeinträchtigt ist, z. B. durch Sprünge oder tiefe Kratzer!
ACHTUNG!
Die Objektivlinse sollte wöchentlich gereinigt werden, da sich sehr schnell Nebelfluidrückstände absetzen,
die die Leuchtkraft des Gerätes erheblich reduzieren. Den Lüfter monatlich reinigen.
Die Gobos können mit einer weichen Bürste gereinigt werden. Reinigen Sie das Innere des Projektors
mindestens einmal im Jahr mit einem Staubsauger oder einer Luftbürste.
Die dichroitischen Farbfilter, das Goborad und die Innenlinsen sollten monatlich gereinigt werden.
Damit die Lager der rotierenden Teile gut funktionieren, müssen sie ca. alle 6 Monate geschmiert werden.
Zum Ölen ist eine Spritze mit einer feinen Nadel zu benutzen. Die Ölmenge darf nicht übermäßig sein, um zu
vermeiden, dass das Öl während des Rotierens ausläuft.
Im Geräteinneren befinden sich keine zu wartenden Teile. Wartungs- und Servicearbeiten sind ausschließ-
lich dem autorisierten Fachhandel vorbehalten!

Chat with your Futurelight DSC-60 manual using AI

Get instant AI answers from your Futurelight DSC-60 manual

Ask anything about the Futurelight DSC-60. Answers come from this manual, with the pages they are based on.

DSC-60 Maintenance Schedule

Remind me when maintenance is due
Weekly
Clean the objective lens

Clean weekly to remove smoke fluid residues that reduce light output. Use a moist, lint-free cloth.

Show in the manual (page 23)
Monthly
Clean cooling fans

Clean monthly using a soft brush or cloth to ensure proper airflow.

Show in the manual (page 23)
Monthly
Clean dichroic filters and internal lenses

Clean the color filters, gobo wheel, and internal lenses monthly with a soft brush or cloth.

Show in the manual (page 23)
Semiannual
Lubricate rotating parts

Lubricate bearings of rotating parts every six months using a syringe with a fine needle. Avoid excessive oil.

Show in the manual (page 23)
Yearly
Clean fixture interior

Vacuum or blow out dust from the inside of the projector at least once a year.

Show in the manual (page 23)
Yearly
Skilled person inspection

Safety-related installations must be inspected by a skilled person once a year.

Show in the manual (page 23)
Every 4 years
Expert safety inspection

Safety-related installations must be inspected by an expert every four years for acceptance testing.

Show in the manual (page 23)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend DSC-60?

Yes No

Frequently Asked Questions

A

It is a professional lighting scanner designed to create moving decorative effects with color, gobos, prism effects, strobe, focus, and dimming. It is intended for stages, clubs, theaters, and similar indoor venues.

Is this answer helpful?

A

The fixture supports two control formats: 12-channel mode and 14-channel mode. This lets users choose between a simpler setup or a more detailed control layout, depending on the lighting system and programming needs.

Is this answer helpful?

A

Yes. It can operate in stand-alone mode using built-in programs, and it also supports master/slave setups. In addition, it offers sound-active operation through the built-in microphone.

Is this answer helpful?

A

Yes. The scanner uses a slot-in gobo system that allows tool-free gobo exchange. That makes it easier to customize patterns and update the visual look without a complicated service process.

Is this answer helpful?

A

It must be installed indoors with proper ventilation, away from moisture and flammable materials. Overhead mounting requires professional rigging, a safety bond, and compliance with local safety rules.

Is this answer helpful?

A

The fixture can be set to blackout, hold the last position, switch to an internal program, or use sound-active behavior. This gives operators several fallback options when the controller signal is lost.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Bright 60 W LED output delivers strong visibility and a modern, energy-conscious lighting punch.
  • Selectable 12/14 channel DMX modes make the fixture adaptable to simple or advanced control setups.
  • Tool-free gobo system and interchangeable gobos allow fast creative changes.
  • Built-in effects include color wheel, rainbow motion, prisms, frost, strobe, and gobo shake.
  • Stand-alone, master/slave, and sound-active modes add flexibility for different venues.
VS

Disadvantages

  • Indoor use only, so it is not suitable for outdoor or wet environments.
  • Overhead installation requires professional rigging, safety bonds, and strict precautions.
  • Regular cleaning and maintenance are important, especially around optics and the fan.
  • The fixture is designed for professional use, so setup and operation may be complex for beginners.
M: OA-GPT-54-NAN

Product Specification

Mirror Type

1x Single Mirror

Light Source

LED

Power Consumption

150W

Beam Angle

13°

PAN Angle

180°

TILT Angle

45°

Color Mixing

Color Wheel (7 colors)

Effects

Dimmer, Focus (motorized), Gobos (7x rotating), Strobe

Control

DMX (14 channels), Music control, Master/Slave

Special Features

Gobo Shake

Dimensions

22.16x11.85x9.13in (WxHxD)

Weight

16.53lb

M: OA-GPT-54-NAN

Product Description

Futurelight DSC-60 LED Scanner: compact power for dynamic lighting

The Futurelight DSC-60 LED Scanner is built for creators who want sharp movement, vivid color, and flexible control in one compact fixture. Using a bright 60 W LED source, it delivers a punchy beam with strong presence on stage, in clubs, theaters, and event spaces. If you are looking for a fixture that combines classic scanner character with modern LED efficiency, the Futurelight DSC-60 LED Scanner Manual reveals just how versatile this unit can be.

One of the strongest points of the DSC-60 is its mix of visual tools. A seven-position color wheel, UV filter, white, rotating gobos, gobo shake, and prism effects make it easy to build energetic scenes without adding extra fixtures. The scanner also supports motorized focus, dimming, strobe control, and smooth PAN/TILT movement, so the output can shift from subtle atmosphere to fast-paced beams in seconds.

Control options are another highlight. Users can run the fixture through 12- or 14-channel DMX modes, use it in stand-alone operation, or set up master/slave linking for synchronized effects. The built-in microphone adds sound-active possibilities, while the control board makes addressing and customization straightforward. For installations that need quick adjustments, the remote DMX addressing feature is especially practical.

Design-wise, the DSC-60 focuses on convenience and reliability. Its slot-in gobo system allows tool-free pattern changes, and the interchangeable gobo setup gives designers room to personalize looks. The automatic power supply adapts to a wide voltage range, making it suitable for different venues and touring environments. Combined with preprogrammed scenes and editable sequences, it offers a strong balance between ready-made effects and custom programming.

That said, the fixture is clearly intended for professional indoor use. It needs careful mounting, proper safety bonds, and regular cleaning to keep performance high. The optics, fan, and rotating parts benefit from routine maintenance, especially in fog-heavy environments where residue can build up quickly. Treated well, the DSC-60 can be a dependable workhorse for visual impact and repeat use.

Notes

  • Best suited for professional indoor lighting setups.
  • Use proper rigging and safety accessories for overhead mounting.
  • Regular lens and fan cleaning helps preserve brightness and performance.
  • Ideal when you want scanner-style motion with flexible DMX control.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly