Manual.ly Logo

Formfutura Tough PLA Manual

0.0 · 0 Ratings

PDF manual · 6 Pages

English

M: QW-35-FL
page

/ 6

Loading...
ea8121f47e1cddbbb30b154ffba75059f02a page 1
SAFETY DATA SHEET
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Tough PLA
Trade name or designation
of the mixture
-
Registration number
None.
Synonyms
26-May-2020
Issue date
01
Version number
1.2. Relevant identified uses of the substance or mixture and uses advised against
3D printer filament
Identified uses
None known.
Uses advised against
1.3. Details of the supplier of the safety data sheet
Supplier
Company name
FormFutura BV
Tarweweg 3, 6534 AM, Nijmegen, The Netherlands
Address
Telephone
Contact person
+31 (0)85 743 4000 (Office hours Mo. - Fr. 09:00 - 17:00 CET)
Product Compliance
e-mail
+31 (0)30 274 8888, only for the doctor
1.4. Emergency telephone
number
National Poison Information Center Utrecht, The Netherlands
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
The mixture has been assessed and/or tested for its physical, health and environmental hazards and the following classification
applies.
Classification according to Regulation (EC) No 1272/2008 as amended
This mixture does not meet the criteria for classification according to Regulation (EC) 1272/2008 as amended.
Hazard summary
Not available.
2.2. Label elements
Label according to Regulation (EC) No. 1272/2008 as amended
None.
Hazard pictograms
Signal word
None.
Hazard statements
The mixture does not meet the criteria for classification.
Precautionary statements
Prevention
Not available.
Response
Not available.
Storage
Not available.
Disposal
Not available.
Supplemental label information
None.
Not a PBT or vPvB substance or mixture.
2.3. Other hazards
SECTION 3: Composition/information on ingredients
3.2. Mixtures
SDS EU
1 / 6

Chat with your Formfutura Tough PLA manual using AI

Get instant AI answers from your Formfutura Tough PLA manual

Ask anything about the Formfutura Tough PLA. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Tough PLA?

Yes No

Frequently Asked Questions

A

The initial melting point ranges from 150 to 180 degrees Celsius, which corresponds to approximately 302 to 356 degrees Fahrenheit. This range allows for easy processing on standard 3D printers.

Is this answer helpful?

A

No, the mixture does not meet the criteria for classification as hazardous under Regulation (EC) No 1272/2008. However, good ventilation is recommended to avoid inhaling any potential fumes or dust during printing.

Is this answer helpful?

A

While a heated bed is generally recommended for better adhesion, the material is designed to be user-friendly. Standard PLA settings often suffice, but checking specific printer recommendations is always wise.

Is this answer helpful?

A

Empty containers should be taken to an approved waste handling site for recycling or disposal. Contaminated packaging must be collected and reclaimed or disposed of in sealed containers at licensed facilities.

Is this answer helpful?

A

The main ingredient is Polylactic Acid resin, which makes up between 80 and less than 90 percent of the mixture. Other components below reportable levels account for the remaining portion.

Is this answer helpful?

A

No, the filament is insoluble in water. This property contributes to its durability but means it will not dissolve in water-based cleaning solutions.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Exceptional impact resistance compared to standard PLA
  • Prints easily on most standard FDM printers without a heated chamber
  • Made from biodegradable Polylactic Acid resin
  • Stable melting point between 150 and 180 degrees Celsius
  • Not classified as hazardous under EU regulations
VS

Disadvantages

  • May emit irritating fumes if decomposition occurs during fire
  • Requires good ventilation to avoid inhaling dust or fumes
  • Insoluble in water which complicates certain disposal methods
  • Not suitable for applications requiring extreme heat resistance above 60 C
  • Potential for temporary irritation if ingested or contacted with eyes
M: QW-35-FL

Product Specification

Package

Filament Spool

Type

PLA

Suitability

universal

Print Temperature

419-437°F

Heatbed Recommendation

122-140°F

Melt Flow Index

8.7g/10min

Impact Resistance

29.8kJ/m²

Elastic Modulus

2750MPa

Tensile Strength

46MPa

Heat Deflection Temperature

135°F

Density

1.21g/cm³

M: QW-35-FL

Product Description

Discover the Strength of Formfutura Tough PLA 3D Printing Filament

Formfutura Tough PLA 3D Printing Filament represents a significant leap forward for makers and professionals who require durability without sacrificing ease of use. Designed specifically to bridge the gap between standard PLA and more difficult-to-print engineering plastics, this material offers exceptional impact resistance while maintaining the user-friendly characteristics that make PLA popular. Whether you are prototyping functional parts or creating end-use components, this filament provides the reliability needed for demanding applications.

The product is composed primarily of Polylactic Acid resin, ensuring it is biodegradable under industrial composting conditions while delivering mechanical properties far superior to traditional variants. Its melting point ranges from 150 to 180 degrees Celsius, allowing for smooth extrusion on most standard FDM printers without requiring specialized heated chambers. The filament maintains stability during printing, reducing the risk of warping or delamination common with other tough materials.

Safety remains a top priority in its formulation. The mixture does not meet criteria for classification as hazardous under Regulation (EC) No 1272/2008, making it safe to handle in home workshops when basic ventilation is used. While inhalation of fumes should be avoided by ensuring good air circulation, the material poses minimal health risks compared to ABS or Nylon. It is insoluble in water and stable under normal storage conditions, provided it is kept in a tightly closed container away from strong oxidizing agents.

For users seeking high-performance results, Formfutura Tough PLA delivers consistent diameter control and excellent layer adhesion. This ensures that printed objects possess uniform strength throughout their structure. The material is ideal for creating tools, jigs, fixtures, and protective gear that must withstand physical stress. By combining toughness with environmental friendliness, it stands out as a versatile choice for modern additive manufacturing.

Notes:

  • Store in a dry place to prevent moisture absorption.
  • Ensure adequate ventilation during printing to avoid fume accumulation.
  • Wear safety glasses and gloves when handling hot prints.
M: QW-35-FL

© Copyright 2026 Manual.ly