Manual.ly Logo

Formfutura STYX-12 PA Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: OA-GPT-54-NAN
page

/ 4

Loading...
7d73f7dec52ed7ccb5c49cb8ae8272f0f6f6 page 1
Material Safety Data Sheet
According to EU Regulation No. 1907/2006
Issued on: 10 April 2017
Formfutura VOF
CoC:
55502105
Phone:
+31 (0)85 002 0881
Groenestraat 215
VAT:
NL851741083B01
Email:
6531 HH Nijmegen
EORI:
NL851741083
Website:
www.formfutura.com
The Netherlands
Page 1 of 4
1.1 Trade name:
1.2 Chemical name:
1.3 Typical use of the material:
1.4 Identification of the company:
STYX-12™
Polyamide based polymer blend
Monofilament for FFF/FDM technology based 3D printing
Formfutura VOF
Groenestraat 215
6531 HH Nijmegen
The Netherlands
Phone: +31 (0)85 002 0881
Emergency phone number: +31 (0)30 274 8888
2.1 Risk advise to man and the environment:
2.2 Classification of the substance or mixture:
2.3 Special advice on hazards:
No risk exists to the health of users if the product is
handled and processed properly.
Not classified as dangerous according to Directive
67/548/EEC
Danger of burns while handling the heated or molten
product.
3.1 Chemical nature:
3.2 CAS number:
3.3 Additional information:
Polyamide based polymer enhanced for 3D printing
-
No harmful substances used.
4.1 If inhaled:
4.2 On skin contact:
4.3 On contact with eyes:
4.4 On ingestion:
4.5 Note to the physician:
After inhalation of decomposition products, gases or dust, bring the affected
person to a source of fresh air and keep calm. Contact a physician in case of
discomfort.
In case of contact with melted material, immediately cool the skin with plenty of
cold running water. Removal of adhering to skin polymer, or burns caused by
molten material require hospital treatment.
In case of contact with eyes, rinse open eyes thoroughly with water. If irritation
develops, seek immediate medical attention.
No effects known. Rinse mouth with water and then drink plenty of water. Seek
medical attention if difficulties or discomfort occur.
Treat symptomatically

Chat with your Formfutura STYX-12 PA manual using AI

Get instant AI answers from your Formfutura STYX-12 PA manual

Ask anything about the Formfutura STYX-12 PA. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend STYX-12 PA?

Yes No

Frequently Asked Questions

A

It is a polyamide-based filament intended for FFF/FDM 3D printing. It is suited to functional parts and projects where stable handling and reliable material behavior are important.

Is this answer helpful?

A

Under normal handling, it is not classified as dangerous. However, heated or molten filament can cause burns, so safety precautions are still important during printing and post-processing.

Is this answer helpful?

A

Keep it in a dry room, ideally in closed packaging or a container with desiccant. Avoid moisture, extreme heat, and sources of ignition to preserve quality and stability.

Is this answer helpful?

A

The listed melting point is about 258°C, and the product is not self-igniting under normal conditions. Always follow printer-specific settings and handle hot material carefully.

Is this answer helpful?

A

The material is described as odourless in its normal form. Even so, good ventilation is recommended when printing, especially in enclosed or multi-printer environments.

Is this answer helpful?

A

Available information reports no known negative ecological effects at the current level of knowledge. Still, waste should be minimized, and disposal should follow local regulations.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Polyamide-based blend designed for FFF/FDM 3D printing and functional parts.
  • Non-hazardous classification under normal use with no harmful substances stated.
  • Melting point around 258°C supports technical and more heat-aware applications.
  • Odourless, natural filament that suits controlled workshop environments.
VS

Disadvantages

  • Needs dry storage and moisture protection to maintain reliable print quality.
  • Hot or molten material can cause burns, so careful handling is required.
  • Dust control and ventilation are recommended during printing and cleanup.
  • Technical material may require more setup discipline than beginner-friendly filaments.
M: OA-GPT-54-NAN

Product Specification

Form

Filament Spool

Type

Nylon

Application

universal

Printing Temperature

464-518°F

Melting Temperature

464-500°F

Heatbed Recommendation

176-248°F

Impact Strength

14 kJ/m^2

Elongation at Break

150%

Modulus of Elasticity

1400MPa

Tensile Strength

60MPa

Dimensional Stability

221°F

Density

63.68 lb/ft^3

Special Features

Shore D81 Hardness, UV-resistant, weather-resistant

M: OA-GPT-54-NAN

Product Description

Formfutura STYX-12 PA 3D Printing Filament Manual

A durable polyamide blend for FFF/FDM makers

Formfutura STYX-12 PA 3D printing filament is a polyamide-based material designed for filament-based 3D printing. It is built for users who want a practical balance of printability, stability, and dependable part performance. With its natural, odourless character and non-hazardous classification under normal use, it fits well into workshop environments where safety and consistency matter.

What stands out most about this filament is its strong focus on controlled handling. The material is stable under recommended storage conditions, but it should be kept dry and protected from moisture to preserve print quality. Like many engineering-oriented filaments, it rewards careful setup: proper ventilation, clean storage, and attention to heated surfaces all help deliver better results.

The filament has a melting point around 258°C and a density of 1.02 g/cc, which supports its use in functional 3D printing projects. It is insoluble in water and shows low mobility in soil, while available data indicates no known negative ecological effects at the current level of knowledge. That makes it appealing for users who value responsible material handling as much as performance.

For everyday printing, STYX-12 PA is best approached as a technical material rather than a casual hobby filament. It is meant for FFF/FDM workflows, and it benefits from dry storage, careful extrusion settings, and sensible post-print handling. The molten material can cause burns, so gloves and protective eyewear are recommended when working near heated parts or fresh prints.

If you are reading a Formfutura STYX-12 PA 3D printing filament Manual, think of it as a guide to making the most of a stable, engineering-minded filament. The main strengths are its clean profile, practical safety stance, and suitability for controlled production environments where repeatability is important.

Notes

  • Store sealed, dry, and away from ignition sources.
  • Use ventilation when printing in enclosed spaces.
  • Handle hot material carefully to avoid burns.
  • Keep the filament protected from moisture for best results.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly