Manual.ly Logo

Formfutura ReForm rPET Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: OA-GPT-5-NAN
page

/ 4

Loading...
ffafd34b469b372ec6394fec67f7a8b82252 page 1
Material Safety Data Sheet
According to EU Regulation No. 1907/2006
Issued on: 2 May 2017
Formfutura VOF
CoC:
55502105
Phone:
+31 (0)85 002 0881
Groenestraat 215
VAT:
NL851741083B01
Email:
6531 HH Nijmegen
EORI:
NL851741083
Website:
www.formfutura.com
The Netherlands
Page 1 of 4
1.1 Trade name:
1.2 Chemical name:
1.3 Typical use of the material:
1.4 Identification of the company:
ReForm™ - rPET
PETG based polymer blend
Monofilament for FFF/FDM technology based 3D printing
Formfutura VOF
Groenestraat 215
6531 HH Nijmegen
The Netherlands
Phone: +31 (0)85 002 0881
Emergency phone number: +31 (0)30 274 8888
2.1 Risk advise to man and the environment:
2.2 Classification of the substance or mixture:
2.3 Special advice on hazards:
No risk exists to the health of users if the product is handled and
processed properly.
Not classified as dangerous according to Directive 67/548/EEC
Danger of burns while handling the heated or molten product.
3.1 Chemical nature:
3.2 CAS number:
3.3 Additional information:
Blend of PETG based polymers enhanced for 3D printing
25038-91-9
No harmful substances used.
4.1 If inhaled:
4.2 On skin contact:
4.3 On contact with eyes:
4.4 On ingestion:
4.5 Note to the physician:
After inhalation of decomposition products, gases or dust, bring the affected person to a
source of fresh air and keep calm. Contact a physician in case of discomfort.
In case of contact with melted material, immediately cool the skin with plenty of cold
running water. Removal of adhering to skin polymer, or burns caused by molten material
require hospital treatment.
In case of contact with eyes, rinse open eyes thoroughly with water. If irritation develops,
seek immediate medical attention.
No effects known. Rinse mouth with water and then drink plenty of water. Seek medical
attention if difficulties or discomfort occur.
Treat symptomatically

Chat with your Formfutura ReForm rPET manual using AI

Get instant AI answers from your Formfutura ReForm rPET manual

Ask anything about the Formfutura ReForm rPET. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend ReForm rPET?

Yes No

Frequently Asked Questions

A

It is intended for FFF/FDM 3D printing and works well for prototypes, concept parts, and general-purpose printed objects. It is designed as a practical monofilament for makers who want a recycled-material option without changing their workflow too much.

Is this answer helpful?

A

For normal, proper use it is not classified as hazardous under the cited EU classification. However, the material still needs sensible handling, especially when heated, since molten plastic can cause burns and overheated material may release fumes.

Is this answer helpful?

A

Keep it in a dry room, inside closed packaging or a sealed container, and ideally with desiccant when not in use. Avoid direct sunlight, moisture, and excessive heat to help maintain print quality and reduce material problems.

Is this answer helpful?

A

Yes, ventilation is recommended, especially if several printers are running at once or if dust is generated during handling. Good airflow helps maintain a safer workspace and reduces exposure to fumes from overheating or processing.

Is this answer helpful?

A

Heat-resistant gloves and protective glasses are recommended when handling hot or molten filament. Protective clothing is also helpful to avoid skin contact. In any printer area, basic workshop hygiene and careful handling are important.

Is this answer helpful?

A

The biggest benefit is the use of recycled content, which can help reduce reliance on virgin raw materials. The product also supports waste minimization efforts, and its packaging can be recycled if it is fully emptied and uncontaminated.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Made from recycled polymer content, supporting more responsible 3D printing choices.
  • Suitable for standard FFF/FDM printers and everyday monofilament workflows.
  • Stable under recommended storage conditions and easy to keep in closed packaging.
  • Not classified as hazardous for normal use when handled correctly.
  • Can support waste reduction goals in prototyping and production planning.
VS

Disadvantages

  • Must be stored dry and protected from moisture, heat, and sunlight.
  • Hot or molten material can cause burns during printing or post-processing.
  • Dust control and ventilation are recommended in busy printing spaces.
  • Can release carbon oxides and other fumes if severely overheated or burned.
  • Not readily biodegradable, so disposal still needs to be managed properly.
M: OA-GPT-54-NAN

Product Specification

Packaging

Filament Spool

Suitability

universal

Weight

2.20 lb

M: OA-GPT-54-NAN

Product Description

Formfutura ReForm Recycled 3D-Print Filament

Formfutura ReForm recycled 3D-print filament is built for makers who want dependable printing with a more responsible material choice. Designed for FFF/FDM 3D printing, it combines recycled polymer content with the familiar handling traits users expect from a practical monofilament. The result is a material that feels suited to everyday prototyping, functional parts, and creative projects where sustainability matters as much as print quality.

Practical performance for makers

This filament is intended to be stable, workable, and easy to integrate into a typical desktop 3D printing workflow. According to the material information, it is not classified as hazardous under EU rules when used properly, and it is considered suitable for well-ventilated printing environments. Like many thermoplastics, it performs best when kept dry and protected from heat, sunlight, and moisture before use. That makes storage an important part of getting consistent results.

Designed with safety and reliability in mind

The material is chemically stable under recommended conditions, but it should still be handled carefully when heated or molten. Burn prevention is important, especially during nozzle changes, bed removal, or post-processing. If multiple printers are running in the same area, local exhaust ventilation is a smart addition. The safety profile also highlights common workshop discipline: avoid dust buildup, keep ignition sources away, and use protective gloves and glasses when needed.

A smart choice for responsible 3D printing

Formfutura ReForm fits well into workflows that value lower waste and the potential for recycling during production planning. The material is insoluble in water, has low mobility in soil, and is intended to reduce waste generation where possible. For users and businesses, that makes it a thoughtful option for practical printing without losing sight of environmental considerations.

Whether you are producing prototypes, concept models, or utility items, this recycled filament offers a balanced mix of usability and awareness. It is not about flashy performance claims; it is about delivering a dependable print material that supports cleaner sourcing, sensible handling, and everyday printing confidence.

Notes

  • Store sealed, dry, and away from direct sunlight.
  • Use ventilation when printing for long periods.
  • Handle melted filament with care to avoid burns.
  • Recycle packaging when it is clean and uncontaminated.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly