Manual.ly Logo

Formfutura Premium ABS Manual

0.0 · 0 Ratings

PDF manual · 5 Pages

English

M: OA-GPT-54-NAN
page

/ 5

Loading...
8bdc27cd9e3bbea8da50993ee7c37a2bcd60 page 1
Material Safety Data Sheet
According to EU Regulation No. 1907/2006
Issued on: 1 December 2015
Formfutura VOF
CoC:
55502105
Phone:
+31 (0)85 002 0881
Groenestraat 215
VAT:
NL851741083B01
Email:
6531 HH Nijmegen
EORI:
NL851741083
Website:
www.formfutura.com
The Netherlands
Page 1 of 5
1.1 Trade name:
1.2 Chemical name:
1.3 Typical use of the material:
1.4 Identification of the company:
Premium ABS
ABS based polymer blend
Monofilament for FFF/FDM technology based 3D printing
Formfutura VOF
Groenestraat 215
6531 HH Nijmegen
The Netherlands
Phone: +31 (0)85 002 0881
Emergency phone number: +31 (0)30 274 8888
2.1 Risk advise to man and the environment:
2.2 Classification of the substance or mixture:
2.3 Special advice on hazards:
No risk exists to the health of users if the product is
handled and processed properly.
Not classified as dangerous according to Directive
67/548/EEC and/or 1999/45EC
Danger of burns while handling the heated or molten
product.
3.1 Chemical nature:
3.2 CAS number:
3.3 Additional information:
Blend of ABS based polymers enhanced for 3D printing
ABS: 9003-56-9 (> 98%)
No harmful substances used.
4.1 If inhaled:
4.2 On skin contact:
4.3 On contact with eyes:
4.4 On ingestion:
4.5 Note to the physician:
After inhalation of decomposition products, gases or dust, bring the affected
person to a source of fresh air and keep calm. Contact a physician in case of
discomfort.
In case of contact with melted material, immediately cool the skin with plenty of
cold running water. Removal of adhering to skin polymer, or burns caused by
molten material require hospital treatment.
In case of contact with eyes, rinse open eyes thoroughly with water. If irritation
develops, seek immediate medical attention.
No effects known. Rinse mouth with water and then drink plenty of water. Seek
medical attention if difficulties or discomfort occur.
Treat symptomatically

Chat with your Formfutura Premium ABS manual using AI

Get instant AI answers from your Formfutura Premium ABS manual

Ask anything about the Formfutura Premium ABS. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Premium ABS?

Yes No

Frequently Asked Questions

A

It is designed for FFF/FDM 3D printing and is well suited for functional parts, prototypes, and items that need better toughness than standard decorative filaments. It works well when durability matters.

Is this answer helpful?

A

Yes, when handled properly. It is not classified as dangerous under normal use, but heated or molten material can cause burns. Good ventilation and basic protective habits are recommended.

Is this answer helpful?

A

Keep it in a dry place, away from moisture, sunlight, and heat sources. When not in use, store it in closed packaging or a container with desiccant to help preserve print quality.

Is this answer helpful?

A

ABS typically performs best with controlled temperatures and a well-ventilated print area. Avoid drafts, keep the printer area clean, and prevent dust buildup around the machine.

Is this answer helpful?

A

When overheated or burned, ABS can release gases associated with thermoplastic decomposition. This is why ventilation is important, especially during long print sessions or when many printers are running.

Is this answer helpful?

A

Its main strengths are toughness, stability, and suitability for practical models. It is a strong option for users who want prints that can handle more stress than lightweight decorative materials.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Durable ABS blend suited for functional FFF/FDM parts
  • Not classified as hazardous under normal use
  • Stable when stored properly in dry conditions
  • Good choice for prints that need heat-resistant performance
VS

Disadvantages

  • Requires ventilation during printing, especially in enclosed spaces
  • Hot or molten material can cause burns if handled carelessly
  • Moisture exposure can affect print consistency
  • Overheating may release irritating decomposition gases
M: OA-GPT-54-NAN

Product Specification

Type

ABS

Suitability

universal

Printing Temperature

428-518°F

Melting Temperature

275-311°F

Heatbed Recommendation

194-230°F

Melt Flow Index

5.5g/10min

Impact Strength

29kJ/m²

Elongation at Break

9%

Modulus of Elasticity

269,770 psi (MD)

Tensile Strength

5,221 psi (MD)

Heat Deflection Temperature

198°F

Density

64.35 lb/ft3

Special Features

weather-resistant

M: OA-GPT-54-NAN

Product Description

Formfutura Premium ABS 3D Printing Filament Manual: A Practical Choice for Durable Prints

Formfutura Premium ABS 3D Printing Filament is built for makers who want dependable results from a material known for toughness and versatility. As an ABS-based polymer blend designed for FFF/FDM 3D printing, it offers a solid balance between strength, stability, and everyday usability. This makes it a smart option for functional parts, prototypes, enclosures, and other prints that need more resilience than basic hobby materials.

One of the main advantages of this filament is its focus on safe and controlled use when handled properly. It is not classified as dangerous under standard handling conditions, and it contains no harmful substances in its intended formulation. That said, like many ABS materials, the heated or molten state requires care. Users should avoid direct skin contact with hot material and keep printing areas well ventilated, especially in busy multi-printer setups.

The material is also designed with storage and processing practicality in mind. Keeping it dry, protected from moisture, and away from direct sunlight helps preserve print quality. Closed packaging with desiccant is recommended when the filament is not in use. With a density of about 1.03 g/cc and a melting range above 100 °C, it is a reliable everyday filament for projects that need a stable and printable ABS profile.

For best results, Formfutura Premium ABS 3D Printing Filament should be used with proper safety habits. Wear protective gloves when handling hot parts, use eye protection if needed, and avoid dust buildup around the printer area. The material is stable under recommended storage conditions, but overheating can release gases common to thermoplastic decomposition, so temperature control matters.

Overall, this filament is a strong fit for users who want a classic ABS experience with a focus on quality and consistency. It is well suited to practical printing, especially when durability and a professional finish are more important than purely decorative output.

Notes

  • Store in a dry room and keep packaging sealed when possible.
  • Use ventilation and avoid inhaling dust or fumes.
  • Handle molten material carefully to prevent burns.
  • The Formfutura Premium ABS 3D Printing Filament Manual style guidance is mainly about safe, steady, everyday printing.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly