Manual.ly Logo

Formfutura EasyWood Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: OA-GPT-54-NAN
page

/ 4

Loading...
5362827b543bb8ccee4ffcae7d0abd84f5a4 page 1
Material Safety Data Sheet
According to EU Regulation No. 1907/2006
Issued on: 7 January 2016
Formfutura VOF
CoC:
55502105
Phone:
+31 (0)85 002 0881
Groenestraat 215
VAT:
NL851741083B01
Email:
6531 HH Nijmegen
EORI:
NL851741083
Website:
www.formfutura.com
The Netherlands
Page 1 of 4
1.1 Trade name:
1.2 Chemical name:
1.3 Typical use of the material:
1.4 Identification of the company:
EasyWood™
PolyLactic Acid (PLA) based polymer blend
Monofilament for FFF/FDM technology based 3D printing
Formfutura VOF
Groenestraat 215
6531 HH Nijmegen
The Netherlands
Phone: +31 (0)85 002 0881
Emergency phone number: +31 (0)30 274 8888
2.1 Risk advise to man and the environment:
2.2 Classification of the substance or mixture:
2.3 Special advice on hazards:
No risk exists to the health of users if the product is
handled and processed properly.
Not classified as dangerous according to Directive
67/548/EEC
Danger of burns while handling the heated or molten
product.
3.1 Chemical nature:
3.2 CAS number:
3.3 Additional information:
Blend of PLA based polymers filled with 30% to 40% wood fibres and
additional additives enhanced for 3D printing.
9051-89-2
No harmful substances used.
4.1 If inhaled:
4.2 On skin contact:
4.3 On contact with eyes:
4.4 On ingestion:
4.5 Note to the physician:
After inhalation of decomposition products, gases or dust, bring the affected
person to a source of fresh air and keep calm. Contact a physician in case of
discomfort.
In case of contact with melted material, immediately cool the skin with plenty of
cold running water. Removal of adhering to skin polymer, or burns caused by
molten material require hospital treatment.
In case of contact with eyes, rinse open eyes thoroughly with water. If irritation
develops, seek immediate medical attention.
No effects known. Rinse mouth with water and then drink plenty of water. Seek
medical attention if difficulties or discomfort occur.
Treat symptomatically

Chat with your Formfutura EasyWood manual using AI

Get instant AI answers from your Formfutura EasyWood manual

Ask anything about the Formfutura EasyWood. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend EasyWood?

Yes No

Frequently Asked Questions

A

It is a wood-filled PLA-based filament made for FFF/FDM 3D printing. It is commonly used for decorative models, design prototypes, and creative prints that benefit from a natural-looking surface.

Is this answer helpful?

A

Yes. The material is a blend of PLA-based polymers with about 30% to 40% wood fibers, which helps create the wood-like appearance and texture after printing.

Is this answer helpful?

A

It is designed for regular 3D printing workflows, but good results depend on correct settings, dry storage, and proper ventilation. A manual or print guide can help optimize performance.

Is this answer helpful?

A

Keep it in a dry room, in closed packaging or a sealed container with desiccant. Protect it from moisture, direct sunlight, and excessive heat to preserve print quality.

Is this answer helpful?

A

Yes, when used properly. The main risks come from hot or molten material, dust, and poor ventilation. Use gloves, eye protection, and avoid touching heated parts during printing.

Is this answer helpful?

A

Printed parts usually have a natural, wood-inspired look with a warm tone and subtle texture. The result is especially appealing for decorative and artistic applications.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • PLA-based blend with a natural wood-like finish for attractive printed results.
  • Contains 30% to 40% wood fibers, adding texture and a more organic appearance.
  • Nearly odorless during normal use, which is pleasant for home or studio printing.
  • Stable and biodegradable under proper handling, with a lower-impact material profile.
VS

Disadvantages

  • Requires dry storage and protection from moisture to maintain print quality.
  • Hot or molten material can cause burns, so careful handling is necessary.
  • Dust and fumes should be managed with ventilation and basic safety practices.
  • Not intended for high-temperature or heavy-duty engineering applications.
M: OA-GPT-54-NAN

Product Specification

Suitability

universal

Print Temperature

392-464°F

Melting Temperature

275-311°F

Heatbed Recommendation

32-140°F

Melt Flow Index

4.5g/10min

Impact Strength

0.66kJ/ft^2

Elongation at Break

171%

Modulus of Elasticity

279,922.76 psi

Tensile Strength

10,297.68 psi

Dimensional Stability

114.8°F

Density

74.91lb/ft^3

Base Color

wooden

M: OA-GPT-54-NAN

Product Description

Formfutura EasyWood Wood 3D Printing Filament

Formfutura EasyWood Wood 3D printing filament is a creative material for makers who want the warm look and feel of wood combined with the reliability of PLA-based printing. This blend is designed for FFF/FDM 3D printers and contains around 30% to 40% wood fibers, giving printed parts a natural appearance and a subtle, almost organic texture. If you are looking for a material that can turn simple prototypes, decor pieces, or artistic models into something more refined, this filament offers a convincing wood-like result with modern printability.

One of the most appealing qualities of EasyWood is its balance between aesthetics and usability. The filament is reported as natural in color, nearly odorless, and stable under recommended storage conditions. It prints as granules with a melting range of about 140°C to 150°C, making it suitable for everyday 3D printing workflows when handled correctly. For creators who want to explore a more handcrafted style, the Formfutura EasyWood Wood 3D printing filament Manual would be a helpful companion for dialing in print settings and achieving consistent results.

Beyond its visual appeal, the material is intended for practical use in well-ventilated environments and is best kept dry, away from moisture, sunlight, and ignition sources. Like many wood-filled filaments, it benefits from careful handling, especially when the material is heated or molten. Dust control, proper ventilation, and basic protective gear help ensure a safe printing experience. The blend is also described as biodegradable, which adds to its appeal for users who value more responsible material choices in their projects.

EasyWood is especially attractive for product designers, hobbyists, and artists who want to create objects that look less synthetic and more natural. It can suit decorative prints, architectural models, accessories, and concept pieces where surface character matters as much as dimensional accuracy. While it is not a high-temperature engineering filament, it shines in applications where visual warmth, ease of printing, and a wood-inspired finish are the priority.

Notes

  • Store in a dry container with desiccant when not in use.
  • Avoid dust buildup and use ventilation near active printers.
  • Keep the material away from heat, flames, and direct sunlight.
  • Handle molten filament carefully to prevent burns.

Summary

Formfutura EasyWood combines PLA-based printability with real wood fibers for a natural finish, making it a strong choice for decorative and creative 3D printing projects.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly