Formfutura EasyFil HIPS Manual
PDF manual · 4 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Formfutura EasyFil HIPS manual using AI
Get instant AI answers from your Formfutura EasyFil HIPS manual
Ask anything about the Formfutura EasyFil HIPS. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend EasyFil HIPS?
Yes NoFrequently Asked Questions
It is a HIPS-based filament intended for FFF/FDM 3D printing. The material is suited for general printing tasks and controlled workshop use, especially where stable handling and predictable performance matter.
Is this answer helpful?
According to the provided information, it is not classified as dangerous and does not require a hazard warning label. However, heated or molten material can still cause burns, so normal safety precautions are important.
Is this answer helpful?
The melting range is listed at 105–140°C. The material should not be overheated, since thermal decomposition can occur above 300°C and may release unwanted gases.
Is this answer helpful?
Keep it in a dry room, sealed in closed packaging or a container with desiccant when not in use. Avoid moisture, direct sunlight, and heat or ignition sources.
Is this answer helpful?
Wear heat-resistant gloves, protective glasses, and suitable clothing when dealing with hot or molten material. Good ventilation is recommended, especially where dust may form.
Is this answer helpful?
Waste should be minimized and recycled when possible. Disposal should follow local regulations, and packaging should be emptied completely before recycling or discarding.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Stable HIPS-based blend made for FFF/FDM printing and everyday use.
- Almost odorless and natural in color, which suits clean workshop environments.
- Not classified as hazardous and contains no harmful substances in the blend.
- Works well when stored dry and handled with standard printing precautions.
Disadvantages
- Hot or molten material can cause burns if handled without protection.
- Dust and overheating may produce irritating fumes, so ventilation is needed.
- Must be stored carefully away from moisture, sunlight, and ignition sources.
- Dust formation and static buildup should be avoided during handling and cleanup.
Product Specification
Type
HIPS
Suitability
universal
Print Temperature
428-500°F
Melting Temperature
356-500°F
Heatbed Recommendation
194-230°F
Melt Flow Index
0.01lb/10min
Impact Strength
0.01Btu/in²
Elongation at Break
50%
Elastic Modulus
224.81ksi
Tensile Strength
3.19ksi
Dimensional Stability
192.2°F
Density
64.93lb/ft³
Special Features
soluble in Limonene
Product Description
Formfutura EasyFil HIPS: Practical 3D Printing Filament for Clean, Reliable Results
Formfutura EasyFil HIPS is a HIPS-based polymer blend designed for FFF/FDM 3D printing. It is a monofilament built for makers who want a dependable material that prints smoothly and handles well in everyday use. With a natural color and an almost odorless profile, it fits neatly into workshops, studios, and home printing setups where consistency matters.
One of the main strengths of this filament is its balanced behavior during printing. The material is stable under recommended storage conditions, has a melting range of 105–140°C, and is not self-igniting or highly flammable. It is also described as free from harmful substances, which adds confidence for users who want a straightforward printing material with fewer concerns about everyday handling. In practical terms, this makes EasyFil HIPS a solid choice for general-purpose printing and support-oriented work.
Safety remains important, especially when the filament is heated or molten. Like many thermoplastics, it should be handled with care once it reaches printing temperatures. Contact with hot material can cause burns, and dust or fumes from overheating should be avoided. Good ventilation is recommended, especially in areas where multiple printers run at once. Using gloves, protective eyewear, and proper clothing helps reduce risk when working close to the nozzle or fresh prints.
Storage is equally important for keeping the filament in good condition. EasyFil HIPS should be kept dry, away from moisture, direct sunlight, and ignition sources. Closed packaging with desiccant is a smart option when the spool is not in use. The material is essentially insoluble in water and has low mobility in soil, which supports controlled disposal and careful workshop management. Waste should be minimized where possible, and packaging can be recycled if it is not contaminated.
For makers looking for a practical, stable, and easy-to-manage filament, Formfutura EasyFil HIPS offers a dependable mix of printability and safety awareness. It is best suited for users who value clean handling, predictable behavior, and a material that works well in a range of 3D printing tasks.
Notes
- Use ventilation when printing in enclosed or high-volume setups.
- Keep the filament dry and sealed for best performance.
- Avoid direct contact with molten material.
- Follow local disposal and recycling rules for waste and packaging.
Search for 67,706 Manuals online
Type-in Brand or Model