Manual.ly Logo

Formfutura EasyFil ABS Manual

0.0 · 0 Ratings

PDF manual · 5 Pages

English

M: OA-GPT-54-NAN
page

/ 5

Loading...
fb29b94c93d29b8a8683b0df325a12bb3b5a page 1
Material Safety Data Sheet
According to EU Regulation No. 1907/2006
Issued on: 1 December 2015
Formfutura VOF
CoC:
55502105
Phone:
+31 (0)85 002 0881
Groenestraat 215
VAT:
NL851741083B01
Email:
6531 HH Nijmegen
EORI:
NL851741083
Website:
www.formfutura.com
The Netherlands
Page 1 of 5
1.1 Trade name:
1.2 Chemical name:
1.3 Typical use of the material:
1.4 Identification of the company:
EasyFil™ ABS
ABS based polymer blend
Monofilament for FFF/FDM technology based 3D printing
Formfutura VOF
Groenestraat 215
6531 HH Nijmegen
The Netherlands
Phone: +31 (0)85 002 0881
Emergency phone number: +31 (0)30 274 8888
2.1 Risk advise to man and the environment:
2.2 Classification of the substance or mixture:
2.3 Special advice on hazards:
No risk exists to the health of users if the product is
handled and processed properly.
Not classified as dangerous according to Directive
67/548/EEC and/or 1999/45EC
Danger of burns while handling the heated or molten
product.
3.1 Chemical nature:
3.2 CAS number:
3.3 Additional information:
Blend of ABS based polymers enhanced for 3D printing
ABS: 9003-56-9 (> 98%)
No harmful substances used.
4.1 If inhaled:
4.2 On skin contact:
4.3 On contact with eyes:
4.4 On ingestion:
4.5 Note to the physician:
After inhalation of decomposition products, gases or dust, bring the affected
person to a source of fresh air and keep calm. Contact a physician in case of
discomfort.
In case of contact with melted material, immediately cool the skin with plenty of
cold running water. Removal of adhering to skin polymer, or burns caused by
molten material require hospital treatment.
In case of contact with eyes, rinse open eyes thoroughly with water. If irritation
develops, seek immediate medical attention.
No effects known. Rinse mouth with water and then drink plenty of water. Seek
medical attention if difficulties or discomfort occur.
Treat symptomatically

Chat with your Formfutura EasyFil ABS manual using AI

Get instant AI answers from your Formfutura EasyFil ABS manual

Ask anything about the Formfutura EasyFil ABS. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend EasyFil ABS?

Yes No

Frequently Asked Questions

A

It is a 3D printing filament designed for FFF/FDM printers. The material is intended for functional prints, prototypes, and parts that benefit from ABS-style toughness and dependable everyday performance.

Is this answer helpful?

A

The material is not classified as dangerous when handled properly. However, it should still be used with care because heated or molten filament can cause burns, and overheating may release unwanted fumes.

Is this answer helpful?

A

Store it in a dry room, away from direct sunlight, moisture, and heat. Keeping it in closed packaging or a container with desiccant helps maintain print quality and prevents storage-related problems.

Is this answer helpful?

A

Yes, good ventilation is recommended, especially if many printers are running at once. Local exhaust near the printing area can help reduce dust and fumes and improve workplace comfort.

Is this answer helpful?

A

Heat-resistant gloves and protective glasses are recommended when handling hot or molten material. Protective clothing is also helpful to avoid skin contact with heated filament.

Is this answer helpful?

A

It has a melting point above 100°C and is designed as a practical ABS-based filament. While it is not a heat-proof industrial resin, it is suitable for many functional parts where standard plastics need better resilience.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • ABS-based blend designed specifically for FFF/FDM 3D printing and practical everyday use.
  • Stable material with no harmful substances stated and no hazardous transport classification.
  • Good choice for durable parts thanks to its tough ABS character and heat resistance.
  • Simple storage and handling when kept dry, sealed, and away from direct sunlight.
VS

Disadvantages

  • Can cause burns if handled while hot or molten, so extra care is required.
  • May release irritating fumes or gases if overheated or burned.
  • Needs good ventilation and dust control during printing and cleanup.
  • Must be stored properly to prevent moisture exposure and performance issues.
M: OA-GPT-54-NAN

Product Specification

Type

ABS

Suitability

universal

Print temperature

428-518°F

Melting temperature

275-311°F

Heatbed recommendation

194-230°F

Melt flow index

0.20 oz/10min

Impact strength

205.57 in-lbf/in^2

Elongation at break

9%

Elastic modulus

275,571.70 psi

Tensile strength

5,511.43 psi

Dimensional stability

217.40°F

Density

64.30 lb/ft^3

M: OA-GPT-54-NAN

Product Description

Formfutura EasyFil ABS 3D Printing Filament

Formfutura EasyFil ABS is an ABS-based 3D printing filament made for makers who want a reliable balance of strength, usability, and everyday performance. Designed for FFF/FDM printing, it offers the familiar benefits of ABS while aiming for smoother handling and a more practical printing experience. For hobbyists and professionals alike, it is a solid option when durability matters.

This filament is built from an ABS polymer blend enhanced for 3D printing. According to the source material, it contains no harmful substances and is not classified as dangerous when used properly. That makes it appealing for users who want a material that performs well without adding unnecessary complexity to the workflow. It is also stable under recommended storage conditions and should be kept dry, protected from sunlight, and away from heat sources.

In use, EasyFil ABS is suited to functional parts, prototypes, and models that need better resilience than softer materials can provide. It handles elevated temperatures well for a standard filament, with a melting point above 100°C and a density of about 1.03 g/cc. The material is also noted as not self-igniting and not highly flammable, which adds confidence during regular workshop use.

Like most ABS materials, the filament rewards careful printing habits. Good ventilation is recommended, especially in busy print areas, and users should avoid inhaling dust or fumes from overheating. When melted, the material can cause burns, so gloves and eye protection are sensible choices. In short, this is a practical filament for users who value toughness, process control, and dependable results.

Notes

  • Store in a dry, sealed container with desiccant when not in use.
  • Avoid extreme heat, dust buildup, and open ignition sources.
  • Use proper protection when handling hot or molten material.
  • Best suited for functional 3D printed parts and routine production work.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly