Manual.ly Logo

Formfutura ClearScent ABS Manual

0.0 · 0 Ratings

PDF manual · 5 Pages

English

M: OA-GPT-54-NAN
page

/ 5

Loading...
3ae4bd9a25d1a91bf35587f8c8daa55c0cec page 1
Material Safety Data Sheet
According to EU Regulation No. 1907/2006
Issued on: 1 December 2015
Formfutura VOF
CoC:
55502105
Phone:
+31 (0)85 002 0881
Groenestraat 215
VAT:
NL851741083B01
Email:
6531 HH Nijmegen
EORI:
NL851741083
Website:
www.formfutura.com
The Netherlands
Page 1 of 5
1.1 Trade name:
1.2 Chemical name:
1.3 Typical use of the material:
1.4 Identification of the company:
ClearScent™ ABS
Acrylonitrile, 1,3 Butadiene, Methyl methacrylate and Styrene Co-
polymer based polymer blend
Monofilament for FFF/FDM technology based 3D printing
Formfutura VOF
Groenestraat 215
6531 HH Nijmegen
The Netherlands
Phone: +31 (0)85 002 0881
Emergency phone number: +31 (0)30 274 8888
2.1 Risk advise to man and the environment:
2.2 Classification of the substance or mixture:
2.3 Special advice on hazards:
No risk exists to the health of users if the product is
handled and processed properly.
Not classified as dangerous according to Directive
1272/2008/EEC.
Danger of burns while handling the heated or molten
product.
3.1 Chemical nature:
3.2 CAS number:
3.3 Additional information:
Blend of ABS based polymers enhanced for 3D printing
Poly(methyl methacrylate): 9011-14–7 (52 ~ 65 %)
Acrylonitrile-Butadiene-Styrene: 9003-56-9 (33 ~ 48 %)
Typical antioxidant: (0 ~ 1 %)
Typical lubricants: (0 ~ 1 %)
Under the EU REACH regulation, the monomers in CAS no. 9011-14-7 and CAS
no. 9003-56-9 are (pre)registered.
4.1 If inhaled:
4.2 On skin contact:
4.3 On contact with eyes:
4.4 On ingestion:
After inhalation of decomposition products, gases or dust, bring the affected
person to a source of fresh air and keep calm. Contact a physician in case of
discomfort.
In case of contact with melted material, immediately cool the skin with plenty of
cold running water. Removal of adhering to skin polymer, or burns caused by
molten material require hospital treatment.
In case of contact with eyes, rinse open eyes thoroughly with water. If irritation
develops, seek immediate medical attention.
No effects known. Rinse mouth with water and if vomiting occurs, lower the
head to ease vomiting. Seek medical attention if difficulties or discomfort occur.

Chat with your Formfutura ClearScent ABS manual using AI

Get instant AI answers from your Formfutura ClearScent ABS manual

Ask anything about the Formfutura ClearScent ABS. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend ClearScent ABS?

Yes No

Frequently Asked Questions

A

It is a 3D printing filament intended for FFF/FDM printing, especially for users who want ABS-like performance with a lower-odor printing experience. It suits functional models, prototypes, and general workshop use.

Is this answer helpful?

A

It is designed to be almost odorless compared with typical ABS materials. While no filament is completely scent-free, this blend is made to improve comfort in regular printing environments.

Is this answer helpful?

A

The material has a melting range of roughly 200°C to 220°C. Actual printer settings may vary depending on the machine, part geometry, and cooling setup.

Is this answer helpful?

A

Under the cited EU classification, it is not classified as dangerous for normal handling and processing. Even so, heated or molten material can still cause burns, so careful handling remains important.

Is this answer helpful?

A

Keep it in a dry room, sealed in its packaging or container, ideally with desiccant. Avoid moisture, direct sunlight, high heat, and ignition sources to preserve print quality.

Is this answer helpful?

A

Use ventilation, avoid dust buildup, wear eye protection, and use heat-resistant gloves when handling hot material. Good industrial hygiene and caution around molten plastic are recommended.

Is this answer helpful?

A

Yes, the packaging can be recycled if it is empty and not contaminated. Disposal should follow local regulations, and waste should be minimized whenever possible.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Almost odorless, making it more comfortable for frequent printing.
  • Compatible with common FFF/FDM workflows and standard ABS-style use.
  • Stable under proper storage conditions and easy to keep dry.
  • Not classified as hazardous for normal use when handled correctly.
VS

Disadvantages

  • Hot material can still cause burns during printing or cleanup.
  • Dust and fumes should be managed with ventilation and care.
  • Sensitive to moisture, heat, and direct sunlight in storage.
  • Eco-toxicity data is limited, so environmental impacts are not fully documented.
M: OA-GPT-54-NAN

Product Specification

Type

ABS

Suitability

universal

Print Temperature

428-500°F

Heatbed Recommendation

194-212°F

Melt Flow Index

0.03lb/10min

Impact Strength

1.50 BTU/ft^2

Elongation at Break

35%

Modulus of Elasticity

275,571.77 psi

Tensile Strength

5,685.48 psi

Heat Deflection Temperature

179.6°F

Density

66.17 lb/ft^3

Special Features

100HRR Hardness, relatively low odor emission, weather resistant

M: OA-GPT-54-NAN

Product Description

Formfutura ClearScent ABS: A Practical, Low-Odor Filament for FFF/FDM

Formfutura ClearScent ABS is a 3D printing filament designed for makers who want the familiar strength and workability of ABS with a cleaner, more user-friendly printing experience. Built as a polymer blend based on ABS and related components, it is aimed at everyday FFF/FDM use and fits well into workshops, studios, and home printing setups.

One of its standout qualities is the almost odorless character of the material. That makes it appealing for users who print frequently or in spaces where comfort matters. The filament is described as a natural-colored granule-based product with a melting range of about 200°C to 220°C, which suggests reliable processing on standard ABS-capable printers.

From a safety and handling perspective, ClearScent ABS is not classified as dangerous under the cited EU rules when used properly. Still, like most thermoplastics, it should be treated with respect when heated. Molten material can cause burns, and dust formation should be avoided. Good ventilation, eye protection, and heat-resistant gloves are sensible choices when printing or post-processing.

Storage is equally important. The material should be kept dry, sealed, and away from direct sunlight, moisture, and ignition sources. This helps preserve print quality and reduces the risk of problems during use. The filament’s density is listed at 1.06 g/cc, and it is insoluble in water, which aligns with its role as a durable polymer material for functional parts.

For readers comparing materials, the Formfutura ClearScent ABS, 3D Printing Filament Manual would be useful as a practical guide for safe handling, storage, and printing conditions. In short, this filament is a solid option for users who want ABS-style performance with a more comfortable printing environment and straightforward everyday use.

Notes

  • Handle hot or molten filament carefully to avoid burns.
  • Print in a ventilated area, especially when running multiple printers.
  • Store sealed with desiccant for best results.
  • Recycle packaging when it is clean and uncontaminated.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly