Manual.ly Logo

Formfutura ABSpro Manual

0.0 · 0 Ratings

PDF manual · 5 Pages

English

M: OA-GPT-54-NAN
page

/ 5

Loading...
094937ab1e539559a29b6f3ab0d5ac6371ef page 1
Material Safety Data Sheet
According to EU Regulation No. 1907/2006
Issued on: 1 December 2015
Formfutura VOF
CoC:
55502105
Phone:
+31 (0)85 002 0881
Groenestraat 215
VAT:
NL851741083B01
Email:
6531 HH Nijmegen
EORI:
NL851741083
Website:
www.formfutura.com
The Netherlands
Page 1 of 5
1.1 Trade name:
1.2 Chemical name:
1.3 Typical use of the material:
1.4 Identification of the company:
ABSpro™
ABS based polymer blend
Monofilament for FFF/FDM technology based 3D printing
Formfutura VOF
Groenestraat 215
6531 HH Nijmegen
The Netherlands
Phone: +31 (0)85 002 0881
Emergency phone number: +31 (0)30 274 8888
2.1 Risk advise to man and the environment:
2.2 Classification of the substance or mixture:
2.3 Special advice on hazards:
No risk exists to the health of users if the product is
handled and processed properly.
Not classified as dangerous according to Directive
1272/2008/EC.
Danger of burns while handling the heated or molten
product.
3.1 Chemical nature:
3.2 CAS number:
3.3 Additional information:
Blend of ABS, PolyCarbonate and Styrene Maleic Anhydride based polymers
enhanced for 3D printing.
-
None of the substances, named in the Candidate list art. 59 (1,10) of the
REACH regulation EC number 1907/2006 has been used in a concentration >
0,1%..
4.1 If inhaled:
4.2 On skin contact:
4.3 On contact with eyes:
4.4 On ingestion:
4.5 Note to the physician:
After inhalation of decomposition products, gases or dust, bring the affected
person to a source of fresh air and keep calm. Contact a physician in case of
discomfort.
In case of contact with melted material, immediately cool the skin with plenty of
cold running water. Removal of adhering to skin polymer, or burns caused by
molten material require hospital treatment.
In case of contact with eyes, rinse open eyes thoroughly with water. If irritation
develops, seek immediate medical attention.
Rinse mouth with water. Induce vomiting immediately and seek medical
attention. If a person vomits when lying on his back, place him in the recovery
position..
Treat symptomatically

Chat with your Formfutura ABSpro manual using AI

Get instant AI answers from your Formfutura ABSpro manual

Ask anything about the Formfutura ABSpro. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend ABSpro?

Yes No

Frequently Asked Questions

A

It is designed for FFF/FDM 3D printing, especially when users want stronger, more functional prints. The blend is suited for parts that need better durability than basic hobby filaments.

Is this answer helpful?

A

When handled and processed properly, it is not classified as dangerous under EU rules. However, heated or molten material can still burn skin, and overheating can create fumes.

Is this answer helpful?

A

Yes. Good ventilation is recommended, especially if multiple printers are running. Exhaust support helps reduce exposure to dust, vapors, and any decomposition products from overheating.

Is this answer helpful?

A

Store it in a dry room, in closed packaging or a sealed container with desiccant. Keep it away from moisture, direct sunlight, heat, and other ignition sources.

Is this answer helpful?

A

The main concerns are burn risk from hot material and possible fumes if the filament is overheated. Use heat protection gloves, eye protection, and avoid direct contact with molten plastic.

Is this answer helpful?

A

Yes, if the packaging is completely emptied and not contaminated, it can usually be recycled according to local regulations. Always follow local disposal rules for both packaging and waste material.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • ABS-based blend with added polymers for improved 3D printing performance and toughness.
  • Suitable for FFF/FDM use and practical for functional parts, prototypes, and workshop models.
  • Stable under normal storage and not classified as hazardous when handled correctly.
  • Heat and moisture aware storage guidance helps preserve print quality and consistency.
VS

Disadvantages

  • Can release harmful fumes or decomposition products if overheated, so ventilation is important.
  • Hot or molten material may cause burns, requiring careful handling and protection.
  • Should be kept dry and away from sunlight, moisture, and ignition sources.
  • Not readily biodegradable, so disposal and recycling should be planned responsibly.
M: OA-GPT-54-NAN

Product Specification

Type

ABS

Suitability

universal

Print Temperature

473-527°F

Melting Temperature

467.6-503.6°F

Heatbed Recommendation

230-248°F

Melt Flow Index

0.01lb/10min

Impact Strength

3.44BTU/ft^2

Elongation at Break

11%

Modulus of Elasticity

304,580.00psi

Tensile Strength

5,787.00psi

Dimensional Stability

226.4°F

Density

65.55lb/ft^3

Special Features

weather resistant

M: OA-GPT-54-NAN

Product Description

Formfutura ABSpro 3D Printing Filament Manual: Practical Strength for Everyday Printing

Formfutura ABSpro is built for makers who want a reliable, engineering-minded filament with the familiar benefits of ABS and a more refined printing experience. This ABS-based polymer blend is designed for FFF/FDM 3D printing and combines ABS with PolyCarbonate and Styrene Maleic Anhydride polymers for better performance in demanding projects. In a Formfutura ABSpro 3D printing filament Manual, the focus would be on safe handling, good storage habits, and consistent results.

What makes ABSpro stand out?

One of the biggest strengths of ABSpro is its balance between toughness and usability. It is described as stable under recommended storage conditions, with a melting point above 100°C and a density of about 1.02 g/cc. That makes it a practical choice for functional parts, prototypes, and prints that need more durability than basic hobby materials. It is also not classified as dangerous under EU rules when used properly.

Printing and handling notes

Like most ABS-style materials, ABSpro rewards careful temperature management and a well-ventilated workspace. The material can produce fumes or decomposition products if overheated, so airflow matters, especially in rooms with multiple printers running at once. The filament should be kept dry, away from sunlight, moisture, and ignition sources, and stored in closed packaging with desiccant when not in use.

Because the filament is intended for heated extrusion, users should also think about personal protection. Heat-resistant gloves, safety glasses, and clothing that limits skin contact are recommended when handling molten material. This is less about complexity and more about smart workshop habits.

Why creators choose it

For makers, ABSpro offers a dependable middle ground: it is not a fragile decorative filament, but a material aimed at usable parts and repeatable prints. It is insoluble in water, expected to have low mobility in soil, and may be easier to manage in a workshop than many specialty composites. Packaging can also be recycled if it remains uncontaminated, which is a small but welcome bonus.

Notes

  • Avoid direct contact with hot or molten filament.
  • Use ventilation when printing for long sessions.
  • Store in a dry place with the spool sealed.
  • Follow the Formfutura ABSpro 3D printing filament Manual for best results.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly