Manual.ly Logo

Formfutura ABSpro Flame Retardant Manual

0.0 · 0 Ratings

PDF manual · 5 Pages

English

M: OA-GPT-54-NAN
page

/ 5

Loading...
32f5941c65eaa2c842aabcd8f70f3de05fc9 page 1
Material Safety Data Sheet
According to EU Regulation No. 1907/2006
Issued on: 2 January 2016
Formfutura VOF
CoC:
55502105
Phone:
+31 (0)85 002 0881
Groenestraat 215
VAT:
NL851741083B01
Email:
6531 HH Nijmegen
EORI:
NL851741083
Website:
www.formfutura.com
The Netherlands
Page 1 of 5
1.1 Trade name:
1.2 Chemical name:
1.3 Typical use of the material:
1.4 Identification of the company:
ABSpro™ - Flame Retardant
ABS based polymer blend
Monofilament for FFF/FDM technology based 3D printing
Formfutura VOF
Groenestraat 215
6531 HH Nijmegen
The Netherlands
Phone: +31 (0)85 002 0881
Emergency phone number: +31 (0)30 274 8888
2.1 Risk advise to man and the environment:
2.2 Classification of the substance or mixture:
2.3 Special advice on hazards:
No risk exists to the health of users if the product is
handled and processed properly.
Not classified as dangerous according to Directive
1272/2008/EC.
Danger of burns while handling the heated or molten
product.
3.1 Chemical nature:
3.2 CAS number:
3.3 Additional information:
Blend of ABS and PolyCarbonate polymers and added halogen-free flame
retardant modifiers enhanced for 3D printing.
-
None of the substances, named in the Candidate list art. 59 (1,10) of the
REACH regulation EC number 1907/2006 has been used in a concentration >
0,1%..
4.1 If inhaled:
4.2 On skin contact:
4.3 On contact with eyes:
4.4 On ingestion:
4.5 Note to the physician:
After inhalation of decomposition products, gases or dust, bring the affected
person to a source of fresh air and keep calm. Contact a physician in case of
discomfort.
In case of contact with melted material, immediately cool the skin with plenty of
cold running water. Removal of adhering to skin polymer, or burns caused by
molten material require hospital treatment.
In case of contact with eyes, rinse open eyes thoroughly with water. If irritation
develops, seek immediate medical attention.
Rinse mouth with water. Induce vomiting immediately and seek medical
attention. If a person vomits when lying on his back, place him in the recovery
position..
Treat symptomatically

Chat with your Formfutura ABSpro Flame Retardant manual using AI

Get instant AI answers from your Formfutura ABSpro Flame Retardant manual

Ask anything about the Formfutura ABSpro Flame Retardant. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend ABSpro Flame Retardant?

Yes No

Frequently Asked Questions

A

It is used for FFF/FDM 3D printing of functional parts that need better heat resistance and flame-retardant characteristics. It suits technical prototypes, enclosures, and components where durability matters.

Is this answer helpful?

A

When handled correctly, it is not classified as dangerous under the referenced EU classification. However, molten material can cause burns, and proper ventilation and safe handling are still important.

Is this answer helpful?

A

It is an ABS-based polymer blend with polycarbonate and halogen-free flame-retardant modifiers. This combination is designed to improve performance for 3D printing applications.

Is this answer helpful?

A

Store it in a dry room, inside a closed container or packaging with desiccant when possible. Keep it away from moisture, direct sunlight, and ignition sources.

Is this answer helpful?

A

Yes, it is made for FFF/FDM technology. As with many engineering filaments, good printer settings and proper ventilation help achieve the best results.

Is this answer helpful?

A

Use heat-resistant gloves when handling hot material, wear eye protection, avoid dust buildup, and work in a well-ventilated area. If many printers run together, local exhaust is recommended.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Flame-retardant formulation adds an extra layer of safety for technical prints.
  • ABS/PC blend supports toughness, heat resistance, and functional part use.
  • Halogen-free modifiers make it a more modern choice for specialized applications.
  • Not classified as hazardous for transport when handled as intended.
VS

Disadvantages

  • Hot or molten material can cause burns, so careful handling is essential.
  • Printing and cleanup benefit from strong ventilation and dust control.
  • Needs dry storage and protection from moisture, sunlight, and ignition sources.
  • Overheating can release fumes, so process control matters.
M: OA-GPT-54-NAN

Product Specification

Type

ABS

Suitability

universal

Print Temperature

464-500°F

Heatbed Recommendation

230-248°F

Melt Flow Index

17.64oz/10min

Impact Strength

5.95 ft-lbf/in^2

Elongation at Break

6.6%

Elastic Modulus

353.89 ksi

Tensile Strength

9.44 ksi

Dimensional Stability

230°F

Density

73.66 lb/ft^3

Primary Color

black

Color Shade

black

Special Features

flame retardant (UL 94 V-0), weather resistant

M: OA-GPT-54-NAN

Product Description

Formfutura ABSpro Flame Retardant 3D Printing Filament Manual

Formfutura ABSpro Flame Retardant 3D Printing Filament is designed for makers who want a dependable material with a stronger focus on safety and performance. Built on an ABS and polycarbonate polymer blend with halogen-free flame-retardant modifiers, this filament is aimed at FFF/FDM 3D printing projects where durability and thermal resistance matter.

What makes this material interesting is its balance of familiar ABS behavior and enhanced functional properties. It is supplied as a black material and is known for a melting point of around 280°C, which supports demanding print environments. The blend is chemically stable under proper storage and use, and it is not classified as hazardous for transport. For users working on technical prototypes, enclosures, or functional components, that combination can be especially valuable.

The ABSpro Flame Retardant line is not just about printability; it is also about responsible use. The material is intended to be handled in well-ventilated spaces, and it benefits from good workshop habits such as dust control, grounding, and keeping it away from moisture and direct sunlight. When many printers are running at once, local exhaust ventilation is a smart addition. These details make the material a strong fit for users who want a practical filament and a clear safety routine.

In everyday use, this filament is best suited to projects that need a robust finish and resistance to heat-related stress. Its low water solubility and stable nature make it easier to store and manage over time, while the flame-retardant formulation adds peace of mind in applications where fire resistance is part of the requirement. Like many engineering-grade materials, it rewards careful processing and attention to print conditions.

Key takeaways

  • A technical ABS-based filament with added flame-retardant performance.
  • Designed for FFF/FDM printing and functional, durable parts.
  • Best handled with ventilation, heat protection, and good storage habits.
  • Suitable for users seeking a practical material with added safety characteristics.

Notes

  • Store in a dry, sealed container with desiccant when not in use.
  • Avoid overheating and direct contact with molten material.
  • Keep dust away from ignition sources and clean up spills promptly.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly