Manual.ly Logo

Flyer Gotour 5.43 Manual

0.0 · 0 Ratings

PDF manual · 264 Pages

English

M: gpt-5.6-terra
page

/ 264

Loading...
c118b476bb7fab9c8f04297e5c9499c372ee page 4f
76
• Tous les éléments de commande et la
sonnette sont-ils bien fixés et aisément
accessibles ?
• Les freins et le dérailleur fonctionnent-ils ?
Contrôlez également l'étanchéité des
conduites hydrauliques et de leurs rac-
cords.
• Le guidon, la potence, la tige de selle et la
selle sont-ils correctement réglés et fixés
de façon sécurisée ?
• Les roues sont-elles indemnes et fixées de
façon sécurisée ? Les roues tournent-elles
de façon centrée (sans être voilées) ?
• La pression des pneus est-elle correcte ?
Vous trouverez des informations sur
la pression correcte des pneus au cha-
pitre 19 « Roues et pneus ».
• La batterie est-elle suffisamment chargée
pour effectuer le trajet prévu ? La batterie
est-elle correctement en place et fixée ?
Vous trouverez des informations sur
la batterie dans le mode d'emploi corres-
pondant du fabricant de votre entraîne-
ment électrique.
• La béquille latérale est-elle rabattue et
correctement enclenchée ?
Si la béquille latérale n'est pas cor-
rectement enclenchée, ne roulez pas
avec votre vélo électrique. Faites contrô-
ler la béquille latérale par un revendeur
FLYER spécialisé qui se chargera, le cas
échéant, de la régler / fixer correctement.
• Les blocages rapides, les axes de roue,
les vis et les écrous sont-ils tous correc-
tement et intégralement fermés ou fixés ?
Vous trouverez un tableau avec les
principaux assemblages vissés et les
couples de serrage prescrits dans le docu-
ment annexe Caractéristiques techniques.
i
Important : Vérifiez la fixation de
tous les blocages rapides et des axes
de roue même si vous avez laissé
votre vélo sans surveillance pendant
un court moment seulement. Vous
pouvez utiliser votre vélo uniquement
si tous les blocages rapides sont bien
verrouillés. Vous trouverez des
consignes concernant l'utilisation de
blocages rapides et d'axes de roue
au chapitre 21 « Blocages rapides »
au chapitre 22 « Axes de roue ».
7.2 Après chaque trajet
Contrôlez les points suivants après chaque
trajet :
• Le cadre et tous les composants sont-ils
en parfait état ?
Veillez plus particulièrement à la pré-
sence de fissures et d'autres dommages
apparents.
• Dans quel état les roues et leurs compo-
sants sont-ils ?
Contrôlez les pneus pour voir s'ils
présentent des dommages, des traces
d'usure et de porosité, des corps étrangers
et si leur profil est suffisamment profond.
Vérifiez l'usure et la concentricité des
jantes.
Vérifiez la tension des rayons.
Nettoyez et entretenez votre vélo électrique
après chaque trajet afin de prévenir les dys-
fonctionnements liés à l'encrassement.
Vous trouverez des consignes concer-
nant le nettoyage de votre vélo électrique
et de ses composants au chapitre 8 « Net-
toyage et entretien ».
i
Important : après des trajets sous la
pluie, la neige ou en environnement
humide, il est impératif d'effectuer les
étapes suivantes afin de prévenir une
perte immédiate de fonctionnalités
des composants concernés.
• Nettoyez la chaîne et huilez-la ensuite
avec un lubrifiant approprié et homologué
par le fabricant.
• Nettoyez les composants des freins et du
dérailleur.
• Contrôlez si la lubrification de tous les
composants est suffisante.
Votre revendeur FLYER spécialisé vous
renseignera sur les composants devant
être huilés et sur la façon de le faire.

Chat with your Flyer Gotour 5.43 manual using AI

Get instant AI answers from your Flyer Gotour 5.43 manual

Ask anything about the Flyer Gotour 5.43. Answers come from this manual, with the pages they are based on.

Gotour 5.43 Maintenance Schedule

Remind me when maintenance is due
Before each ride
Inspect safety-critical bike functions

Check controls, bell, brakes, shifting, wheels, tire pressure, battery, stand, and all quick releases, axles, bolts, and nuts.

Show in the manual (page 79)
After each ride
Inspect and clean the E-bike

Check the frame, components, wheels, tires, rims, and spoke tension. Clean and care for the E-bike to prevent dirt-related malfunctions.

Show in the manual (page 25)
Semiannual
Inspect the E-bike for wear

Inspect and maintain the E-bike and its components for wear as described in the maintenance chapter.

Show in the manual (page 29)
Yearly or every 1,000 km
Have a FLYER dealer inspect the E-bike

Have a dealer inspect, adjust, and replace components as needed, including lubrication, wear checks, wheels, brakes, gears, hubs, headset, and pedals.

Show in the manual (page 26)
Yearly
Have the hub gear oil changed

Have a FLYER dealer perform an oil change for the hub gear once per year.

Show in the manual (page 32)
After wet rides
Clean and lubricate the chain and components

After rain, snow, or wet riding, clean and oil the chain, clean brake and shifting components, and check that all components are sufficiently lubricated.

Show in the manual (page 25)
Every 15 operating hours
Oil the chain

Use universal oil regularly after about 15 hours of use. Also oil it after cleaning, rain rides, or when it becomes very wet.

Show in the manual (page 28)
After cleaning or wet rides
Lubricate suspension components

Lubricate suspension elements with the original lubricant after every cleaning, rain ride, or other heavy wetting.

Show in the manual (page 28)
After cleaning or wet rides
Lubricate quick releases, axles, and joints

Lubricate quick releases, thru-axles, and other joints with an approved lubricant after cleaning, rain rides, or heavy wetting.

Show in the manual (page 28)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend Gotour 5.43?

Yes No

Frequently Asked Questions

A

It is positioned as an electric bicycle for everyday travel and comfortable recreational riding. Electric pedal assistance can make hills, wind, and longer routes easier while the rider remains in control of pedaling and gear selection.

Is this answer helpful?

A

The motor assists when the rider pedals and a support level is selected. More pedal force and a higher support setting generally produce more assistance, but they also increase energy consumption and can reduce range.

Is this answer helpful?

A

Range depends on battery capacity, selected assistance level, terrain, surface, riding style, rider weight, tire pressure, mechanical condition, and ambient temperature. Plan trips conservatively because real-world range can be lower than ideal estimates.

Is this answer helpful?

A

Check brake function, tire pressure, wheel security, steering and saddle fastening, battery charge and retention, lights, controls, fasteners, and the stand. Do not ride if safety-related components are damaged, loose, or malfunctioning.

Is this answer helpful?

A

Use a soft damp cloth, clean water, and mild soap where needed. Avoid high-pressure washers, compressed air, and direct hose spraying. Keep cleaning products and lubricants away from brake pads, rotors, and rim braking surfaces.

Is this answer helpful?

A

The guidance recommends an initial inspection after four months or 200 km, whichever occurs first. Ongoing inspection is recommended once a year or after 1,000 km. A dealer should inspect the bike after a crash or unusual impact.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Electric pedal assistance can reduce effort on hills, headwinds, and longer daily routes.
  • Selectable support levels let riders balance assistance, battery use, and expected range.
  • The platform supports clear maintenance routines, including pre-ride checks and scheduled inspections.
  • Compatible configurations may include practical features such as lighting, a stand, luggage support, and different drivetrain types.
VS

Disadvantages

  • Actual range varies substantially with terrain, support mode, rider weight, tire pressure, weather, and maintenance.
  • E-bikes are heavier than non-assisted bicycles, making lifting, carrying, and pushing more demanding.
  • Battery handling requires care: avoid heat, impacts, moisture, open flames, and metal objects.
  • Some accessories, including child seats and trailers, are only permitted on specifically approved configurations.
M: gpt-5.6-terra

Product Specification

Type

Trekking bike

Frame style

Low-step

Frame material

Aluminum

Wheel size

29"

Fork type

Suspension

Suspension fork

Suntour Mobie-A32

Suspension travel

2.95 in

Handlebar shape

Straight

Brake type

Hydraulic disc

Brakes

Shimano MT410

Rear derailleur

Shimano Nexus

Gears

5 (1x5)

Motor position

Mid-drive

Drive system

Bosch Performance Line

Display

Bosch Intuvia

Motor torque

55.32 lb-ft

Battery

Li-ion, 36 V, 750 Wh, 20.1 Ah

Max. pedal assist speed

15.53 mph

Max. permissible total weight

330.69 lb

Weight

70.55 lb

Features

Internal cable routing, 0.59 in through-axle system, internal gear hub, front fender, rear fender, rear rack, lighting, frame lock, chain guard, kickstand

M: gpt-5.6-terra

Product Description

Flyer Gotour 5.43 - Read, Download & Print Free

The Flyer Gotour 5.43 is presented within FLYER's comprehensive E-bike range as a practical electric bicycle designed for everyday mobility and relaxed longer rides. Its design combines pedal-powered riding with electric assistance, helping riders manage climbs, headwinds, and extended routes with less effort. As with other models in the Gotour family, the bike is intended to support comfortable, controlled travel while retaining the familiar handling of a bicycle.

Built for confident everyday riding

The electric drive provides assistance when the rider pedals. Assistance level, pedaling force, terrain, rider weight, tire pressure, temperature, and the bicycle's condition can all affect battery range. Riders can select a support mode suited to the route, using lower assistance to conserve energy or higher assistance when extra help is needed.

The Gotour 5.43 may be equipped with a chain or belt drive, depending on its specific configuration. Chain systems transfer power through chainrings and rear sprockets, while belt systems use a belt and pulleys. Gear systems also vary by build, with derailleur and hub gear options covered for smooth adjustment of effort and speed. Lighter gears are useful for climbing, while higher gears support faster riding on level roads.

Safety and care matter

Reliable riding begins with checks before every trip. Confirm that the brakes, wheels, tires, handlebar, saddle, lights, battery, fasteners, and controls are secure and working correctly. Brake performance can be reduced on wet, dirty, icy, or slippery surfaces, so speed and braking force should always match the conditions. Riders should learn which brake lever controls each wheel before setting off.

The battery should be protected from impacts, excessive heat, moisture, open flames, and metal objects that could create a short circuit. Remove or secure it when parking or transporting the bicycle where possible. Regular cleaning with a soft cloth, water, and mild soap helps preserve the frame and components. High-pressure cleaners, compressed air, and direct hose spraying should be avoided because they may damage electrical parts.

Notes for owners

A first professional inspection is recommended after four months or 200 km, whichever comes first. Further inspections should be completed annually or after 1,000 km. After a crash, do not continue riding until a qualified FLYER dealer has checked the bicycle, battery, frame, brakes, and related components. Always follow local traffic rules, stay within the permitted total weight, and use only approved accessories for luggage, child seats, or trailers.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly