Manual.ly Logo

Fluke 56 Manual

0.0 · 0 Ratings

PDF manual · 34 Pages

English

M: QW-35-FL
page

/ 34

Loading...
bdce0be35cd10c31945eea5ab9a747175826 page 1e
56x
Bedienungshandbuch
22
Wartung
Batterieladung
Die Batterieladungssymbole zeigen den ungefähren Zustand der Batterieladung
an.
Hinweise
Wenn die Batterien schwach sind, speichert das Thermometer keine
Messwerte. Bei versuchter Speicherung wird „Err“ auf der Anzeige
angezeigt.
J
Batterien sind bei 5 %. Die Batterien müssen vor der
Durchführung weiterer Messungen ersetzt werden.
Ersetzen der Batterien
W Warnung
Batterien enthalten gefährliche Chemikalien, die
Verbrennungen verursachen oder explodieren können. Bei
Kontakt mit Chemikalien diese mit Wasser abwaschen und
ärztlichen Rat suchen. Zur Vermeidung von Verletzungen und
zur Gewährleistung eines sicheren Betriebs und einer sicheren
Wartung sind folgende Hinweise zu beachten:
• Vor dem Öffnen des Akkufachs alle Messfühler,
Messleitungen und sämtliches Zubehör entfernen.
• Den Akku nicht zerlegen.
• Sollte der Akku ausgelaufen sein, das Produkt vor der
Verwendung reparieren.
• Wenn das Produkt über längere Zeit nicht verwendet wird,
müssen die Akkus entfernt werden, da sie sonst auslaufen
und das Produkt beschädigen können.
• Um ein Auslaufen der Akkus zu verhindern, muss
sichergestellt werden, dass die Polarität korrekt ist.
• Die Akkuklemmen nicht miteinander kurzschließen.
• Batteriezellen und -blöcke nicht zerlegen oder quetschen.
• Zellen oder Akkus nicht in einem Behälter aufbewahren, in
dem die Klemmen kurzgeschlossen werden können.
• Batteriezellen und Akkublöcke weder Hitze noch Feuer
aussetzen. Keiner direkten Sonneneinstrahlung aussetzen.
Hinweis
Die Batterien sollten innerhalb von einer Minute nach Entfernung
wieder eingesetzt werden, um manuelle Neueingabe der Uhrzeit und
des Datums des Thermometers zu vermeiden.
Einsetzen bzw. Ersetzen der 2 AA/LR6-Batterien (siehe Abbildung 10):
1. Die Verschlusslasche an der Batteriefachabdeckung in die Position
„Unlock“ schieben und den Griff öffnen.

Chat with your Fluke 56 manual using AI

Get instant AI answers from your Fluke 56 manual

Ask anything about the Fluke 56. Answers come from this manual, with the pages they are based on.

56 Maintenance Schedule

When low battery
Replace batteries

Replace batteries immediately when a low battery symbol appears to ensure accurate measurements.

Show in the manual (page 30)
As needed
Clean lenses

Blow loose particles off with clean compressed air and wipe surface carefully with a water-moistened cotton swab.

Show in the manual (page 31)
As needed
Clean housing

Use soap and water with a wet sponge or soft cloth. Do not submerge in water or use abrasive cleaners.

Show in the manual (page 31)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend 56?

Yes No

Frequently Asked Questions

A

The device supports a range from -40 degrees Celsius up to 800 degrees Celsius.

Is this answer helpful?

A

Yes, it supports KTC type thermocouples for contact measurements alongside infrared readings.

Is this answer helpful?

A

Battery life is approximately 4 hours with laser and backlight on, or 100 hours with them off.

Is this answer helpful?

A

Yes, it is designed for hazardous areas meeting specific zone requirements and ATEX safety standards.

Is this answer helpful?

A

Access the memory menu and press the delete softkey to clear all or individual records.

Is this answer helpful?

A

The standard factory setting for the emissivity value is 0.95 by default.

Is this answer helpful?

A

The warranty covers material defects for two years but excludes damage from misuse or external events.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Wide temperature range from -40 C to 800 C suitable for diverse industrial applications
  • Includes KTC input for simultaneous contact and radiometer measurements
  • Stores up to 99 memory readings for later analysis and reporting
  • Adjustable emissivity settings improve accuracy on various surface materials
  • Programmable high and low alarms alert operators to safe temperature limits
VS

Disadvantages

  • Battery life is limited to 4 hours when backlight and laser are active
  • Requires regular calibration checks to minimize measurement drift over time
  • Small target measurement demands precise aiming and steady handling
  • Manual setup requires understanding of specific safety standards for operators
  • Display visibility may be challenging in extremely bright outdoor environments
M: QW-35-FL

Product Specification

Temperature Range

-40 deg F to +1472 deg F

Display

yes

Features

Auto-off, Memory function (for 99 measurements)

Power Source

Battery-powered (2x AA batteries)

IP Rating

IP54

Weight

0.71 lbs

M: QW-35-FL

Product Description

Precision with the Fluke 56 Infrared Thermometer

Advanced Measurement Solutions

Finding the right temperature measurement tool is critical for industrial safety and efficiency across multiple sectors including energy and manufacturing worldwide. The Fluke 56 Infrared Thermometer offers robust capabilities for non-contact readings in challenging environments globally. It features a wide temperature range suitable for various demanding applications ranging from -40 degrees Celsius up to 800 degrees Celsius comfortably. Professionals rely on its accuracy to prevent overheating in electrical panels or mechanical machinery components daily. It is also built to withstand dust and moisture in industrial settings.

Key Functional Highlights

This device utilizes a single point laser specifically designed to assist with precise aiming on small targets accurately. Users can adjust the emissivity value manually based on surface conditions or select from a predefined table of common materials. The tool supports both infrared and thermocouple measurements simultaneously via the KTC type connection port. This flexibility allows for complex diagnostics in manufacturing processes or HVAC repair systems effectively and quickly. The memory function stores up to 99 readings for later analysis and detailed reporting needs. Calibration drift is minimized through regular checks outlined in technical documentation.

Important Guidelines and Safety

Proper operation requires understanding the operating environment and strict safety protocols for users. The user should consult the Fluke 56 Infrared Thermometer Manual for detailed setup instructions and maintenance tips regularly. Safety warnings regarding laser exposure are essential for personnel protection against potential eye injury risks. The instrument is designed for hazardous areas meeting specific zone requirements and ATEX safety standards. Compliance with safety standards is mandatory for all operators using this equipment. Regular maintenance ensures long-term reliability in harsh conditions and prevents internal calibration drift over time.

Battery and Display Specifications

The high-resolution display features a backlight for low-light environments and clear data visibility. Battery life is optimized for extended field work without needing constant external power sources nearby. Replace batteries promptly when the battery icon appears to avoid data loss during critical operations. The unit automatically powers off after periods of inactivity to conserve energy and protect internal components.

Alarm Features

Additionally, the system includes programmable temperature alarms for high and low thresholds to alert operators immediately. This function helps prevent equipment damage by signaling deviations from safe operating parameters instantly.

Conclusion and Performance

Investing in quality tools improves workplace safety and operational data quality significantly for teams. Accurate diagnostics save money and prevent costly failures in busy production lines or facilities. This device stands out for its durability and precise data output capabilities for experienced engineers and technicians. Always follow safety protocols to maximize performance and ensure regulatory compliance during use. Ensuring accuracy leads to better maintenance schedules and fewer unexpected shutdowns for plant owners.

M: QW-35-FL

© Copyright 2026 Manual.ly