Manual.ly Logo

Exquisit EKI801-5 Manual

0.0 · 0 Ratings

PDF manual · 52 Pages

English

M: QW-35-FL
page

/ 52

Loading...
e35fc7fb3992f5dd4333dece003156aba76e page 11
17
ELEKTROANSCHLUSS
• Zum Anschluss des Gerätes an das Elektronetz beauftragen Sie einen Elektrofachmann,
der die landesüblichen Vorschriften der örtlichen Elektroversorgungsunternehmen genau
kennt und sorgfältig beachtet.
• Der Berührungsschutz betriebsisolierter Teile muss nach der Montage sichergestellt sein.
• Ob die erforderlichen Anschlussdaten mit denen des Netzes übereinstimmen, finden Sie
auf dem Typenschild.
• Das Gerät muss durch Trenneinrichtungen allpolig vom Netz abgeschaltet werden können.
Im abgeschalteten Zustand muss ein Kontaktabstand von 3 mm vorhanden sein. Als
geeignete Trennvorrichtungen gelten LS-Schalter, Sicherungen und Schütze.
• Die Installation muss durch Sicherungen geschützt sein. Elektrische Kabel müssen durch
Einbauten abgedeckt sein.
• Wenn das Gerät nicht mit einem zugänglichen Stecker ausgestattet ist, müssen beim
festen Einbau gemäß den Montageanweisungen andere Trennungsmöglichkeiten
berücksichtigt werden.
• Das Zuleitungskabel muss so angebracht werden, dass die heißen Teile des Kochfelds
nicht berührt werden.
Achtung!
Dieses Gerät ist nur für eine Strom-Versorgung von 230 V~ 50/60 Hz ausgelegt.
Schließen Sie immer den Schutzleiter mit an.
Beachten Sie das Anschlussschema.
Der Anschlusskasten befindet sich auf der Unterseite des Gerätes. Um das Gehäuse zu öffnen,
verwenden Sie einen Schraubenzieher und schieben Sie ihn in den vorgesehenen Schlitzen
hinein.
Netz
Anschluss
Durchmesser
Kabel
Sicherung
230V~ 50/60 Hz
1 Phasen + N
3 x 2.5 mm²
H 05 V2V2 - F
25 A *
400V~ 50/60 Hz
2 Phasen + N
4 x 1.5 mm²
H 05 V2V2 - F
16 A *
( * ) laut EN 60 335-2-6 Norm
Anschluss des Kochfeldes :
Verwenden Sie für die verschiedenen Anschlussmöglichkeiten die Polbrücken aus Messing, die
sich im Gehäuse befinden.
Einphasiger Anschluss 230V~1P+N
Bringen Sie eine Polbrücke zwischen Anschlussklemme N1 und N2 und zwischen L1 und L2.
Befestigen Sie die Erdung an die « Erde » Anschlussklemme, den Nullleiter an Anschlussklemme
N1 oder N2, die Phase L an Anschlussklemme L1 oder L2.
Zweiphasiger Anschluss 400V~2P+N
Bringen Sie eine Polbrücke zwischen Anschlussklemme N1 und N2
Befestigen Sie die Erdung an die « Erde » Anschlussklemme, den Nullleiter an Anschlussklemme
N1 oder N2, die Phase L1 an Anschlussklemme L1 und die Phase L2 an Anschlussklemme L2.
Die Drähte korrekt hineinstecken und die Schrauben fest anziehen.
4 Wochen nach der Installation müssen Sie die Schrauben in dem Gehäuse unbedingt
nachziehen.
Wir sind nicht verantwortlich für Zwischenfälle die durch falschen Anschluss, oder nicht
vorhandenen oder mangelhaften Erdungsanschluss entstehen.

Chat with your Exquisit EKI801-5 manual using AI

Get instant AI answers from your Exquisit EKI801-5 manual

Ask anything about the Exquisit EKI801-5. Answers come from this manual, with the pages they are based on.

EKI801-5 Maintenance Schedule

Remind me when maintenance is due
After 4 weeks
Tighten terminal screws

Four weeks after installation, ensure the screws in the connection box are tightened again to maintain safe electrical contact.

Show in the manual (page 17)
Regularly
Clean the hob surface

Switch off and let cool. Use a damp cloth with mild detergent. Dry thoroughly. Do not use abrasive cleaners or steam cleaners.

Show in the manual (page 14)
Immediately
Remove sugar spills

Remove sugar, plastic, or foil residues immediately while hot to prevent permanent damage to the glass ceramic surface.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend EKI801-5?

Yes No

Frequently Asked Questions

A

Place a magnet on the bottom of the pot. If it sticks firmly, the cookware is compatible with the Exquisit EKI801-5. Alternatively, fill the pot with water and place it on a zone; the water should heat up quickly.

Is this answer helpful?

A

The U symbol indicates that no pan is detected or the pan placed is not suitable for induction. It also appears if the pot bottom is too small for the cooking zone.

Is this answer helpful?

A

No, the Bridge function typically combines the two left-hand zones to create one large cooking surface. Check the manual for specific zone pairing instructions.

Is this answer helpful?

A

This is normal. The cooling fan continues to operate to dissipate heat from the electronics until the internal components have cooled down sufficiently.

Is this answer helpful?

A

No, the child lock is temporary. You can deactivate it by pressing the minus key and the selection key simultaneously within five seconds of turning the unit on.

Is this answer helpful?

A

Immediately switch off the device and disconnect it from the power supply. Do not attempt repairs yourself; contact customer service or a qualified technician.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High total power of 7400 W for fast heating
  • Booster function boils water quickly
  • Bridge function combines two zones for large pans
  • Child lock prevents accidental changes
  • Pan detection saves energy and enhances safety
VS

Disadvantages

  • Requires professional installation by an electrician
  • Sensitive touch keys can be triggered by wet fingers
  • Incompatible with non-magnetic cookware like pure aluminum
  • Fan noise may occur during intensive use
  • Must be installed with specific heat-resistant materials
M: QW-35-FL

Product Specification

Power

7.4 kW

Design

frameless, black, glass-ceramic surface

Width

31.5 inches (standard width)

Cooking Zones

4 cooking zones, including 4x cooking zone Ø 7.09 inches (1.4/1.8 kW) or 2x dual-zone cooking (1.4/1.8 kW)

Temperature Control

9 levels

Control

Touch-control operation

Features

Pan detection, boost function, bridge function, timer, child lock, overheating protection, safety shut-off, residual heat indicator

M: QW-35-FL

Product Description

Discover the Exquisit EKI801-5 Induction Cooktop Autark

The Exquisit EKI801-5 Induction Cooktop Autark represents a pinnacle of modern kitchen efficiency and safety. Designed for the discerning home cook, this appliance combines sleek aesthetics with powerful performance. When you consult the Exquisit EKI801-5 Induction Cooktop Autark Manual, you unlock the full potential of its four distinct cooking zones, each capable of delivering precise heat control through advanced induction technology.

At the heart of this cooktop lies a robust total power output of 7400 W, ensuring that your meals are prepared quickly and evenly. The unit features four zones, each with a diameter of 180 mm, optimized for various pot sizes starting from a minimum base diameter of 100 mm. Whether you are simmering a delicate sauce on the front left zone or searing a steak on the front right, the individual Booster function allows you to reach high temperatures rapidly, boiling large quantities of water in minutes.

Safety is paramount in the design of the EKI801-5. The intuitive touch control panel provides clear visual feedback for every action. From the moment you place a compatible pan on the surface, the pan detection system activates, displaying a zero if no cookware is present or an error code if the pot is unsuitable. This ensures energy is only used when necessary. The residual heat indicator warns you if a zone remains hot after use, preventing accidental burns. Additionally, the child lock feature secures the controls, giving parents peace of mind during busy meal preparations.

Versatility is another hallmark of this model. The Bridge function allows you to combine two adjacent zones into one large cooking area, perfect for griddles or oversized woks. The built-in timer lets you set cooking durations for up to 99 minutes per zone, automatically shutting off the heat when your dish is ready. Cleaning is straightforward thanks to the durable glass-ceramic surface, which resists scratches and thermal shocks, provided you avoid abrasive tools and sharp objects.

Installation requires professional handling to ensure electrical safety and proper ventilation. The cooktop must be embedded in a heat-resistant worktop with specific cut-out dimensions of 560 by 490 mm. Proper grounding is essential to prevent electrical hazards. By adhering to the guidelines found in the documentation, you ensure long-lasting performance and optimal energy efficiency, making the Exquisit EKI801-5 a reliable centerpiece for any modern kitchen.

Key Notes

  • Always verify pot compatibility using a magnet before cooking.
  • Ensure at least 2 cm of clearance under drawers for ventilation.
  • Do not use extension cords for connection; direct wiring is required.
M: QW-35-FL

© Copyright 2026 Manual.ly