Manual.ly Logo

Exquisit EKC801-5Z Manual

0.0 · 0 Ratings

PDF manual · 40 Pages

English

M: QW-35-FL
page

/ 40

Loading...
9e51ca1e2a8bbaf278e508ce4535d35ebaf5 page 19
25
ELECTRICAL CONNECTION
• The installation of this appliance and the connection to the electrical network should be
entrusted only to an electrician perfectly to the fact of the normative regulations and which
respects them scrupulously.
• Protection against the parts under tension must be ensured after the building-in.
• The data of connection necessary are on the stickers place on the hob casing near the
connection box.
• The connection to the main must be made using an earthed plug or via an omnipolar
circuit breaking device with a contact opening of at least 3 mm.
• The electrical circuit must be separated from the network by adapted devices, for example:
circuit breakers, fuses or contactors.
• If the appliance is not fitted with an accessible plug, disconnecting means must be
incorporated in the fixed installation, in accordance with the installation regulations.
• The inlet hose must be positioned so that it does not touch any of the hot parts of the hob
or even.
Caution!
This appliance has only to be connected to a network 230 V~ 50/60 Hz
Connect always the earth wire.
Respect the connection diagram.
The connection box is located underneath at the back of the hob casing. To open the cover use a
medium screwdriver. Place it in the slits and open the cover.
* calculated with the simultaneous factor following the standard EN 60 335-2-6
Connection of the hob
Setting up the configurations:
For the various kinds of connection, use the brass bridges which are in the box next the terminal
Monophase 230V~1P+N
Put a bridge between terminal 1 and 2.
Attach the earth to the terminate “earth”, the neutral N to terminal 4, the Phase L to one of the
terminals 1 or 2.
Biphase 400V~2P+N
Attach the earth to the terminate “earth”, the neutral N to terminal 4, the Phase L1 to the
terminals 1 and the Phase L2 to the terminal 2.
Caution! Frequent loosening and screwing of the screws on the connection box risks
damaging the efficiency of the tightness once screwed. It is therefore
advisable to keep screwing and unscrewing to a minimum.
Ensure that the cables are correctly inserted and tightly screwed down.
4 weeks after installation, be sure to tighten again the screws in the terminal block.
Mains
Connection
Cable diameter
Cable
Protection calibre
230V~ 50/60Hz
1 Phase + N
3 x 2,5 mm²
H 05 VV - F
H 05 RR - F
25 A *
400V~ 50/60Hz
2 Phases + N
4 x 1.5 mm²
H 05 VV - F
H 05 RR - F
16 A *
We cannot be held responsible for any incident resulting from incorrect connection or
which could arise from the use of an appliance which has not been earthed or has been
equipped with a faulty earth connection.

Chat with your Exquisit EKC801-5Z manual using AI

Get instant AI answers from your Exquisit EKC801-5Z manual

Ask anything about the Exquisit EKC801-5Z. Answers come from this manual, with the pages they are based on.

EKC801-5Z Maintenance Schedule

Remind me when maintenance is due
One time (4 weeks after install)
Tighten terminal block screws

Four weeks after installation, be sure to tighten again the screws in the terminal block to ensure electrical safety.

Show in the manual (page 25)
After each use
Switch off heating zones and clean the glass surface

Turn off all zones after cooking. Clean the hob with a damp cloth and mild detergent, then dry thoroughly.

Show in the manual (page 16)
Immediately when spilled
Remove sugar, plastic or aluminum foil spills

If sugar, synthetic materials or aluminum sheets contact hot zones, remove them immediately while hot to prevent permanent damage to the ceramic glass.

Show in the manual (page 22)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend EKC801-5Z?

Yes No

Frequently Asked Questions

A

Select the zone, press plus to set max power, then press plus again until A blinks. Adjust level with minus button.

Is this answer helpful?

A

No, you must not install this device above a dishwasher or tumble dryer as steam can damage the electronics.

Is this answer helpful?

A

The H symbol indicates residual heat. The zone is still hot and should not be touched to avoid burns.

Is this answer helpful?

A

No, the lock can be deactivated by pressing the minus and plus keys simultaneously within five seconds of turning on.

Is this answer helpful?

A

Immediately switch off the unit and disconnect it from the power source to avoid electric shock risks.

Is this answer helpful?

A

Yes, use flat-bottomed pots without damaged edges to prevent scratching the glass and ensure efficient heat transfer.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High total power of 7000 W ensures fast heating times for various cookware sizes
  • Touch-sensitive control panel offers precise and hygienic operation without physical buttons
  • Automatic cooking function simplifies boiling by managing power reduction automatically
  • Residual heat indicator prevents burns by clearly showing which zones are still hot
  • Glass ceramic surface is resistant to thermal shock and easy to clean when properly maintained
VS

Disadvantages

  • Requires professional installation and cannot be connected via extension cords
  • Sensitive to scratches from rough-bottomed pots or abrasive cleaning tools
  • Cannot be installed directly above a dishwasher due to steam damage risks
  • Magnetic fields may interfere with pacemakers or credit cards if placed too close
  • Control panel lock feature requires specific key combinations to deactivate quickly
M: QW-35-FL

Product Specification

Power

6 kW

Design

frameless, black, glass-ceramic surface

Width

31.5 inches (standard width)

Cooking Zones

4 cooking zones, including 1 dual-ring zone with diameter 8.46 inches (2.2 kW), 2 zones with diameter 7.48 inches (1.8 kW), 1 zone with diameter 5.91 inches (1.2 kW)

Temperature Control

9 levels

Control

Touch control operation

Features

Boil-over prevention, child lock, overheating protection, safety shut-off, residual heat indicator

M: QW-35-FL

Product Description

Experience Culinary Freedom with the Exquisit EKC801-5Z Glass Ceramic Cooktop

The Exquisit EKC801-5Z Glass Ceramic Cooktop Autonomous Manual represents a pinnacle of modern kitchen technology, designed to transform your daily cooking routine into an effortless and safe experience. This sleek appliance combines high-performance heating elements with intuitive touch controls, ensuring that every meal is prepared with precision. The autonomous features allow for smart management of heat levels, making it ideal for both novice cooks and culinary experts who demand reliability.

At the heart of this cooktop lies a powerful total output of 7000 watts, distributed across four distinct zones. The front left zone boasts a generous 215 mm diameter with 2200 watts of power, perfect for large pots and rapid boiling. The rear zones offer versatility with 190 mm diameters and 1800 watts each, while the smaller rear left zone provides precise control for delicate sauces. The glass ceramic surface is not only aesthetically pleasing but also highly resistant to thermal shock, though care must be taken to avoid impact from sharp objects.

Safety is paramount in the design of the Exquisit EKC801-5Z. It includes a residual heat indicator that glows until surfaces are cool enough to touch, preventing accidental burns. The automatic cooking function, or Ankochautomatik, brings water to a boil quickly at maximum power before automatically reducing to your desired setting. For added security during cleaning, the control panel can be locked to prevent unintended changes. Installation requires professional handling to ensure proper ventilation and electrical safety, adhering to strict standards regarding clearance above dishwashers and proximity to walls.

Important Notes for Users

  • Always remove all labels and protective films before first use.
  • Do not use extension cords; direct connection to a grounded outlet is required.
  • Keep magnetic objects away from the active unit to prevent interference.
  • Clean only with non-abrasive materials once the unit has cooled completely.
M: QW-35-FL

© Copyright 2026 Manual.ly