Manual.ly Logo

EUFAB Finch Manual

0.0 · 0 Ratings

PDF manual · 26 Pages

English

M: QW-35-FL
page

/ 26

Loading...
377fbdfa7351ffe5b707213644520c2a3488 page 3
3
Personen- oder Sachschaden durch verändertes Fahrzeugverhalten
Personen- oder Sachschaden durch Verlieren des Fahrrads
Personen- oder Sachschaden durch nicht komplett montierten Fahrradträger
Personen- oder Sachschaden durch überstehende Teile
Personen- oder Sachschaden durch Überladen
Sachschaden durch önende Heckklappe
Sachschaden durch heiße Auspugase
• Das Fahren mit dem Fahrradträger beeinusst die Fahreigenschaften Ihres Fahrzeugs.
• Passen Sie Ihre Fahrgeschwindigkeit dem neuen Fahrzeugverhalten an.
• Fahren Sie nie schneller als 130 km/h.
• Vermeiden Sie plötzliche und ruckartige Steuerbewegungen.
• Achten Sie darauf, dass Ihr Fahrzeug länger ist als gewohnt.
• Das Fahren ohne Sicherheitsgurte kann zu Unfällen führen.
• Überprüfen Sie vor jedem Fahrtantritt den korrekten und festen Sitz des Sicherheitsgurtes um die Fahrräder und den U-Bügel des Trägers.
• Überprüfen Sie vor jedem Fahrtantritt den korrekten und festen Sitz der beiden Gurte um das Vorderrad und den Gurt um das Hinterrad der Fahrräder.
• Spannen Sie die Gurte ggf. nach.
• Überprüfen Sie vor jedem Fahrtantritt, ob die verwendeten Gurte unbeschädigt und unverschlissen sind.
• Beschädigte oder verschlissene Gurte müssen vor Fahrtantritt gegen unbeschädigte Gurte ausgetauscht werden. Es dürfen nur Gurte verwendet werden, die
von der EAL GmbH dafür zugelassen sind.
• Das Fahren mit nicht vollständig zusammengebauten Fahrradträgern kann zu Unfällen führen.
• Die beweglichen Teile des Fahrradträgers stellen im nicht fertig montierten Zustand eine Gefahrenquelle dar.
• Montieren Sie den Fahrradträger vollständig vor Fahrtantritt.
• Über den Rand des Fahrzeugs bzw. Fahrradträgers stehende Teile können während der Fahrt Personen- oder Sachschäden verursachen.
• Montieren Sie nur Teile, die nicht über den Rand des Fahrzeugs herausragen.
• Das Überschreiten der max. Nutzlast des Fahrradträgers, sowie der zulässigen Stützlast der Anhängerkupplung oder des zulässigen Gesamtgewichts kann zu
schweren Unfällen führen.
• Beachten Sie unbedingt die Angaben zur max. Nutzlast, zulässigen Stützlast und zulässigem Gesamtgewicht Ihres Fahrzeugs. Überschreiten Sie diese
Angaben keinesfalls.
• Die Heckklappe könnte gegen den Fahrradträger schlagen und beschädigt werden.
• Elektrische Heckklappen abschalten und manuell betätigen.
• Nehmen Sie den Fahrradträger vor dem Önen der Heckklappe ab.
Es können Schäden am Träger oder dem Fahrrad entstehen, wenn die Auspumündung direkt daran grenzt.
• Benutzen Sie ggf. eine Auspublende.
4. SICHERHEITSHINWEISE
• Das Warndreieck kennzeichnet alle für die Sicherheit wichtigen Anweisungen. Befolgen Sie diese immer, anderenfalls könnten Sie sich
verletzen oder das Gerät könnte beschädigt werden.
• Kinder dürfen nicht mit dem Gerät spielen.
• Reinigung und Benutzerwartung dürfen nicht von Kindern ohne Beaufsichtigung durchgeführt werden.
• Lassen Sie das Verpackungsmaterial nicht achtlos liegen. Dieses kann für Kinder zu einem gefährlichen Spielzeug werden!
• Benutzen Sie dieses Produkt nur für die dafür vorgesehene Verwendung!
• Manipulieren oder zerlegen Sie das Gerät nicht!
• Verwenden Sie zu Ihrer eigenen Sicherheit ausschließlich Zubehör oder Ersatzteile, die in der Anleitung angegeben sind, oder deren
Verwendung durch den Hersteller empfohlen wird!
Personen- oder Sachschaden durch beschädigten Fahrradträger
Beschädigungen des Trägers z. B. verbogene Teile, Risse oder Kratzer, schließen die sichere Funktion des Trägers aus.
• Montieren Sie den Fahrradträger nicht, wenn Beschädigungen vorhanden sind.
• Gehen Sie wie im Kapitel Wartung beschrieben vor.
Beachten Sie die Angaben des Kupplungsherstellers auf Ihrem Typenschild. Im Zweifel
fragen Sie direkt beim Hersteller Ihrer Anhängerkupplung, ob diese geeignet ist.
Hersteller Prüfsymbol Passend für
Westfalia
F 4192 Audi A4
F 3830 Audi A6
F 4112 Audi A8
Personen- oder Sachschaden durch Verlust des Fahrradträgers während der Fahrt
Eine unsaubere oder schadhafte Verbindung zwischen Fahrradträger und Anhängerkupplung kann zum Lösen des Fahrradträgers führen.
• Tauschen Sie eine schadhafte Anhängerkupplung aus.
• Säubern Sie die Anhängerkupplung von Dreck, Staub und Fett.

Chat with your EUFAB Finch manual using AI

Get instant AI answers from your EUFAB Finch manual

Ask anything about the EUFAB Finch. Answers come from this manual, with the pages they are based on.

Finch Maintenance Schedule

Before every trip
Check safety straps and rack seating

Verify correct and firm seating of safety straps around bicycles and U-bracket. Check that straps are undamaged and not worn before starting the journey.

After each use
Clean and store rack dry

Wash off mud or dirt with water after use. Store the bicycle rack in a clean and dry place to prevent corrosion.

Regularly
Inspect rack for damage

Check the bicycle rack regularly for damages such as bent parts, cracks, or scratches. Replace damaged or worn parts immediately using only original spare parts.

Regularly
Check and tighten bolts and nuts

Regularly control the bolts and nuts of the bicycle rack. Tighten them if necessary to ensure secure mounting.

Regularly
Lubricate moving parts

Regularly lubricate rotating and movable parts of the rack to ensure smooth operation of mechanisms like the quick lock and folding system.

As needed
Touch up paint damage

Immediately treat any damage to the paintwork with paint to prevent rust and maintain the structural integrity of the metal components.

Regularly
Keep hitch coupling clean

Ensure the trailer tow bar connection point is kept clean and free of grease, dirt, and dust to maintain a safe and secure fit.

Regularly
Check lighting function

Regularly check the functionality of the bicycle rack's lighting system to ensure compliance with road safety regulations.

Show in the manual (page 13)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Finch?

Yes No

Frequently Asked Questions

A

The EUFAB Finch has a maximum payload capacity of 60 kg. This limit applies to the combined weight of the bicycles and any accessories attached to them. Exceeding this weight can compromise safety and structural integrity.

Is this answer helpful?

A

No, the EUFAB Finch must not be mounted on aluminum, light metal, or plastic towbars. It is designed exclusively for use with steel St52-3 or grey cast iron GGG52 couplings to ensure safe and stable operation.

Is this answer helpful?

A

To fold the carrier, first secure the bicycles with the long safety strap. Hold the U-bracket firmly, step on the pedal under the license plate holder, and slowly pull the bracket backward to lower the rack. To raise it, lift the rear and push the U-bracket toward the vehicle until it clicks.

Is this answer helpful?

A

Yes, the package includes one padlock with keys. This lock is essential for securing the quick-lock mechanism to the towbar and also for locking the frame holders to prevent bicycle theft.

Is this answer helpful?

A

If your towbar D-value is less than 7.6 kN, you cannot safely use the EUFAB Finch. You must upgrade your towbar to one that meets the minimum requirement of 7.6 kN to avoid accidents and potential damage.

Is this answer helpful?

A

You should regularly check the bolts, nuts, and straps before every trip. Lubricate moving parts periodically and inspect for wear or damage. Clean the hitch area to keep it free of grease and dirt to ensure proper function.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Robust construction using steel, aluminum, and plastic ensures long-lasting durability
  • Quick-lock system with padlock provides excellent security against theft
  • Foldable design saves significant trunk space when not in use
  • Integrated 13-pin electrical connection ensures proper lighting visibility
  • Supports up to 60 kg payload, suitable for most standard bicycles
VS

Disadvantages

  • Requires specific towbar compatibility (steel/cast iron only, no aluminum)
  • Maximum speed limited to 130 km/h which may restrict some highway driving
  • Heavy weight of approximately 17 kg can make lifting difficult for some users
  • Frame holders may cause minor paint damage if protective film is not used
  • Initial setup requires careful adjustment of the quick-lock mechanism for tight fit
M: QW-35-FL

Product Specification

Type

Bike rack

Mounting

Rear hitch

Load capacity for sports equipment

2 bikes

Max load capacity

132.28 lbs

Features

foldable, rear lights (13-pin)

Color

black

Dimensions

45.28x21.26x26.38 in (LxWxH)

Weight

37.48 lbs

M: QW-35-FL

Product Description

Discover the Ultimate Cycling Companion: The EUFAB Finch

The EUFAB Finch represents a pinnacle of engineering for bicycle enthusiasts who value both safety and convenience. Designed specifically for attachment to vehicle towbars, this carrier transforms your daily commute or weekend adventure into a seamless experience. With its robust construction featuring steel, aluminum, and high-quality plastic, the Finch offers a durable solution that withstands the rigors of the road while maintaining a sleek silver and black aesthetic.

This innovative rack is engineered to transport two bicycles securely, making it ideal for families or groups of friends. The folding mechanism allows for easy storage in your trunk when not in use, saving valuable space and protecting the carrier from the elements. When deployed, the Finch extends to approximately 122 cm in width, providing ample room for various bike models. Its compact folded dimensions of roughly 34 cm ensure it fits neatly into any cargo area without hassle.

Safety is paramount with the EUFAB Finch. It comes equipped with a 13-pin electrical connection for reliable lighting, ensuring you remain visible on the road at all times. The maximum permitted speed of 130 km/h guarantees stability even during highway travel. The device features a quick-lock system with a padlock, securing the carrier to your vehicle against theft. Additionally, frame holders with integrated locks protect your bikes from being stolen while you explore your destination.

Installation is straightforward thanks to the intuitive design. Users simply need to attach the rear lights, mount the license plate holder, and secure the rack onto the towbar using the lever system. The included safety straps and tension belts ensure your bicycles remain firmly in place, preventing any movement during transit. Whether you are heading to a local trail or embarking on a cross-country journey, the EUFAB Finch provides the reliability you need.

Important Notes

  • Always check the D-value of your towbar; it must be at least 7.6 kN.
  • Do not exceed the maximum payload of 60 kg.
  • Ensure the towbar is made of steel or cast iron, never aluminum.
  • Regularly lubricate moving parts to maintain smooth operation.
M: QW-35-FL

© Copyright 2026 Manual.ly