Manual.ly Logo

EUFAB Finch Manual

0.0 · 0 Ratings

PDF manual · 26 Pages

English

M: QW-35-FL
page

/ 26

Loading...
377fbdfa7351ffe5b707213644520c2a3488 page 8
8
1 x Bicycle rack, assembled
1 x Padlock with keys
1 x Frame holder, long, assembled
1 x Safety strap
1 x Frame holder, short, assembled
1 x Operating instructions
Dimensions (W x H x D): approx. 122 x 88 x 57 [cm]
Folded: approx. 34 x 88 x 57 [cm]
Electrical connection: 13-pin
D-value: 7.6 kN
Permitted top speed: 130 km/h
Weight: approx. 17 kg
Payload: 60 kg
Material: Steel / Aluminium / Plastic
Colour: silver / black
WARNING!
Please read the operating instructions carefully prior to use and observe all safety instructions!
Not observing such may lead to personal injury, damage to the device or to your property!
Store the original packaging, the receipt and these instructions so that they may be consulted at a later date! When
passing on the product, also include these operating instructions.
Check the contents of package for integrity and completeness prior to use!
1. PROPER USE OF THE PRODUCT
3.1 TOW BAR REQUIREMENTS
2. SCOPE OF DELIVERY
3. SPECIFICATIONS
This bicycle rack is mounted to the trailer hitch of a vehicle and is designed for the transportation of two bicycles.
This device is not designed to be used by children or persons with limited mental abilities or without experience and/or lack of required specialist knowledge.
Keep children away from the device.
The device is not designated for commercial use.
Utilisation according to the intended purpose also includes the observation of all information in these operating instructions, particularly the observation of
safety instructions. Any other utilisation is considered to be counter to the intended purpose and may result in material damage or personal injuries. EAL GmbH
assumes no liability for damage resulting from improper use.
• The trailer tow bar must be approved in its construction.
• Ball and ball rod must have been forged in one piece.
• Only mount the bicycle rack on a coupling of St52-3 steel, GGG52 grey or higher quality cast iron.
• Not suitable for GGG40 ball rods.
• The D-value of the tow bar must be at least 7.6 kN.
• Never mount the carrier on a tow bar made of aluminium, other light metals or plastic.
• These are manufactured for the following vehicles, e.g. by Westfalia
CONTENTS
1. PROPER USE OF THE PRODUCT ______________________________________________________________________8
2. SCOPE OF DELIVERY ____________________________________________________________________________8
3. SPECIFICATIONS ______________________________________________________________________________8
3.1 TOW BAR REQUIREMENTS ________________________________________________________________________8
4. SAFETY PRECAUTIONS __________________________________________________________________________9
5. MANUAL ___________________________________________________________________________________10
5.1 BEFORE USING FOR THE FIRST TIME __________________________________________________________________10
5.2 INSERTING THE LICENSE PLATE _____________________________________________________________________10
5.3 MOUNTING THE BICYCLE RACK ON THE TRAILER HITCH _______________________________________________________11
5.4 UNFOLDING THE BICYCLE RACK _____________________________________________________________________12
5.5 MOUNTING THE BICYCLE RACK WITH BICYCLES ___________________________________________________________12
5.6 FOLDING MECHANISM __________________________________________________________________________13
6. MAINTENANCE AND CARE ________________________________________________________________________13
7. NOTES REGARDING ENVIRONMENTAL PROTECTION _________________________________________________________13
8. CONTACT INFORMATION _________________________________________________________________________13
FINCH® Bike carrier for trailer coupling
2 x Bolt
1 x General operating permit
2 x Short tensioning straps

Chat with your EUFAB Finch manual using AI

Get instant AI answers from your EUFAB Finch manual

Ask anything about the EUFAB Finch. Answers come from this manual, with the pages they are based on.

Finch Maintenance Schedule

Before every trip
Check safety straps and rack seating

Verify correct and firm seating of safety straps around bicycles and U-bracket. Check that straps are undamaged and not worn before starting the journey.

After each use
Clean and store rack dry

Wash off mud or dirt with water after use. Store the bicycle rack in a clean and dry place to prevent corrosion.

Regularly
Inspect rack for damage

Check the bicycle rack regularly for damages such as bent parts, cracks, or scratches. Replace damaged or worn parts immediately using only original spare parts.

Regularly
Check and tighten bolts and nuts

Regularly control the bolts and nuts of the bicycle rack. Tighten them if necessary to ensure secure mounting.

Regularly
Lubricate moving parts

Regularly lubricate rotating and movable parts of the rack to ensure smooth operation of mechanisms like the quick lock and folding system.

As needed
Touch up paint damage

Immediately treat any damage to the paintwork with paint to prevent rust and maintain the structural integrity of the metal components.

Regularly
Keep hitch coupling clean

Ensure the trailer tow bar connection point is kept clean and free of grease, dirt, and dust to maintain a safe and secure fit.

Regularly
Check lighting function

Regularly check the functionality of the bicycle rack's lighting system to ensure compliance with road safety regulations.

Show in the manual (page 13)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Finch?

Yes No

Frequently Asked Questions

A

The EUFAB Finch has a maximum payload capacity of 60 kg. This limit applies to the combined weight of the bicycles and any accessories attached to them. Exceeding this weight can compromise safety and structural integrity.

Is this answer helpful?

A

No, the EUFAB Finch must not be mounted on aluminum, light metal, or plastic towbars. It is designed exclusively for use with steel St52-3 or grey cast iron GGG52 couplings to ensure safe and stable operation.

Is this answer helpful?

A

To fold the carrier, first secure the bicycles with the long safety strap. Hold the U-bracket firmly, step on the pedal under the license plate holder, and slowly pull the bracket backward to lower the rack. To raise it, lift the rear and push the U-bracket toward the vehicle until it clicks.

Is this answer helpful?

A

Yes, the package includes one padlock with keys. This lock is essential for securing the quick-lock mechanism to the towbar and also for locking the frame holders to prevent bicycle theft.

Is this answer helpful?

A

If your towbar D-value is less than 7.6 kN, you cannot safely use the EUFAB Finch. You must upgrade your towbar to one that meets the minimum requirement of 7.6 kN to avoid accidents and potential damage.

Is this answer helpful?

A

You should regularly check the bolts, nuts, and straps before every trip. Lubricate moving parts periodically and inspect for wear or damage. Clean the hitch area to keep it free of grease and dirt to ensure proper function.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Robust construction using steel, aluminum, and plastic ensures long-lasting durability
  • Quick-lock system with padlock provides excellent security against theft
  • Foldable design saves significant trunk space when not in use
  • Integrated 13-pin electrical connection ensures proper lighting visibility
  • Supports up to 60 kg payload, suitable for most standard bicycles
VS

Disadvantages

  • Requires specific towbar compatibility (steel/cast iron only, no aluminum)
  • Maximum speed limited to 130 km/h which may restrict some highway driving
  • Heavy weight of approximately 17 kg can make lifting difficult for some users
  • Frame holders may cause minor paint damage if protective film is not used
  • Initial setup requires careful adjustment of the quick-lock mechanism for tight fit
M: QW-35-FL

Product Specification

Type

Bike rack

Mounting

Rear hitch

Load capacity for sports equipment

2 bikes

Max load capacity

132.28 lbs

Features

foldable, rear lights (13-pin)

Color

black

Dimensions

45.28x21.26x26.38 in (LxWxH)

Weight

37.48 lbs

M: QW-35-FL

Product Description

Discover the Ultimate Cycling Companion: The EUFAB Finch

The EUFAB Finch represents a pinnacle of engineering for bicycle enthusiasts who value both safety and convenience. Designed specifically for attachment to vehicle towbars, this carrier transforms your daily commute or weekend adventure into a seamless experience. With its robust construction featuring steel, aluminum, and high-quality plastic, the Finch offers a durable solution that withstands the rigors of the road while maintaining a sleek silver and black aesthetic.

This innovative rack is engineered to transport two bicycles securely, making it ideal for families or groups of friends. The folding mechanism allows for easy storage in your trunk when not in use, saving valuable space and protecting the carrier from the elements. When deployed, the Finch extends to approximately 122 cm in width, providing ample room for various bike models. Its compact folded dimensions of roughly 34 cm ensure it fits neatly into any cargo area without hassle.

Safety is paramount with the EUFAB Finch. It comes equipped with a 13-pin electrical connection for reliable lighting, ensuring you remain visible on the road at all times. The maximum permitted speed of 130 km/h guarantees stability even during highway travel. The device features a quick-lock system with a padlock, securing the carrier to your vehicle against theft. Additionally, frame holders with integrated locks protect your bikes from being stolen while you explore your destination.

Installation is straightforward thanks to the intuitive design. Users simply need to attach the rear lights, mount the license plate holder, and secure the rack onto the towbar using the lever system. The included safety straps and tension belts ensure your bicycles remain firmly in place, preventing any movement during transit. Whether you are heading to a local trail or embarking on a cross-country journey, the EUFAB Finch provides the reliability you need.

Important Notes

  • Always check the D-value of your towbar; it must be at least 7.6 kN.
  • Do not exceed the maximum payload of 60 kg.
  • Ensure the towbar is made of steel or cast iron, never aluminum.
  • Regularly lubricate moving parts to maintain smooth operation.
M: QW-35-FL

© Copyright 2026 Manual.ly