Manual.ly Logo

EUFAB Crow Manual

4.7 · 6 Ratings

PDF manual · 24 Pages

English

M: OA-GPT-54-NAN
page

/ 24

Loading...
684e7c73be512959065aa025fa4f1ff1ca0c page 9
9
Manufacturer
Westfalia
F 4192 Audi A4
F 3830 Audi A6
F 4112 Audi A8
Test symbol Suitable for
Observe the instructions from the tow bar manufacturer. If in doubt, ask your manufacturer directly whether their trailer tow bar is suitable.
Not suitable for trailer tow bars made from aluminium.
• The trailer tow bar must be approved in its construction.
• Ball and ball rod must have been forged in one piece.
• Only mount the bicycle rack to a tow bar of steel St52, grey cast iron GGG52 or higher quality.
• The D-value of the tow bar ball must be at least 7.6 kN
• Never mount the rack to a tow bar made of aluminium, other light metals or plastic
Unsuitable ball rods made from GGG40 are produced by Westfalia for the following vehicles:
3.1 Coupling requirements
Personal injury or property damage due to changed vehicle driving characteristics.
• Driving with the mounted bicycle rack will aect the driving characteristics of your vehicle.
• Adjust your speed to the new driving characteristics.
• Never drive faster than 130 km/h.
• Avoid sudden and jerky steering operations.
• Remember that your vehicle is longer than usual.
Personal injury or property damage due to loss of the bicycle.
• Driving without safety straps can lead to accidents.
• Before embarking on any journey, check the correct and rm seating of the safety strap around the bicycles and U-shaped bracket of the rack.
• Before embarking on any journey check the correct and rm seating of both straps around the front wheel and the strap around the rear wheel of the bicycles.
• If necessary tighten the straps again.
• Before embarking on any journey, check to make sure the straps used are undamaged and not worn.
• Damaged or worn straps must be replaced with undamaged ones before you embark on your journey. Only straps authorised by EAL GmbH for the purpose
may be used.
Personal injury or property damage possible due to an incompletely mounted bicycle rack.
• Driving with the bicycle rack not fully assembled may result in accidents.
• The moving parts of the bicycle rack do not represent a source of danger when fully mounted.
• Mount the bicycle rack completely before starting your journey.
4. Safety precautions
• The warning triangle labels all instructions important to safety. Always follow these otherwise you could injure yourself or damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may not be carried out by children without supervision.
• Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the device!
• For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
Personal injury or property damages caused by protruding parts.
• Parts protruding beyond the edge of the vehicle or rack may cause personal injury or property damage during the journey.
• Only mount parts that do not protrude beyond the edge of the vehicle.
Personal injury or property damage due to overloading.
• Exceeding the maximum payload of the bicycle rack and the permitted supporting load of the trailer tow bar or permitted overall weight may lead to serious
accidents.
• Always observe the specications regarding the maximum payload, permitted supporting load and permitted overall weight of your vehicle. Do not exceed
these specications at any time.
Property damage due to opening tailgate.
• The tailgate could hit the bicycle rack and be damaged.
• Switch o the electric tailgate and operate it manually.
• Remove the bicycle rack before opening the tailgate.
Property damage caused by hot exhaust gases.
Damages may be caused to the rack or bicycle if the exhaust outlet is close by.
• Use an exhaust deector if necessary.

Chat with your EUFAB Crow manual using AI

Get instant AI answers from your EUFAB Crow manual

Ask anything about the EUFAB Crow. Answers come from this manual, with the pages they are based on.

Crow Maintenance Schedule

Before every journey
Check safety straps and rack security

Before each trip, verify that all straps are undamaged, worn parts are replaced, and the rack is securely mounted on the tow bar.

Regularly
Inspect bolts and nuts

Regularly check all bolts and nuts and tighten them if necessary to ensure safe operation.

Show in the manual (page 13)
Regularly
Lubricate moving parts

Regularly lubricate rotating and moving parts to maintain smooth function.

Show in the manual (page 13)
After use
Clean and store rack

Wash off mud or dirt with water after use and store the rack in a clean, dry place.

Show in the manual (page 13)
When damaged
Replace damaged parts immediately

Immediately replace any damaged or worn parts using only original replacement parts.

Show in the manual (page 13)
When paint is damaged
Treat paint damage immediately

Immediately treat any paintwork damage with paint to prevent corrosion.

Show in the manual (page 13)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Crow?

Yes No
0
User Pic

Lukas Meyer

8 months ago

Will this folding hitch bike rack securely carry two e-bikes, including one MTB with wider tires? How easy is it to mount and fold up for storage?

0
User Pic

Manual.ly

8 months ago

Yes. Reviews say the rack mounts to the trailer hitch firmly and is quick to use, with one person able to attach and remove it in seconds. The two-bike setup is considered sufficient even for e-bikes. For very wide MTB tires, the tire cradles can be slightly narrow, but the bikes are still held securely by the fastening straps. For storage, the folding mechanism makes the rack compact and easy to fit in a garage, and setup guidance is described as clear and straightforward.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is a towbar-mounted bicycle rack designed to transport two bikes safely on the back of a passenger car. It is meant for private use, not commercial transport.

Is this answer helpful?

A

The maximum payload is 50 kg. You should also follow the permitted support load of your towbar and the total weight limits of your vehicle.

Is this answer helpful?

A

The towbar must be approved, made from suitable materials such as steel St52 or grey cast iron GGG52 or better, and have a D-value of at least 7.6 kN.

Is this answer helpful?

A

No. The instructions state that the rack must not be mounted on aluminum, other light metals, or plastic tow bars because they are not suitable for this load.

Is this answer helpful?

A

Each bike is fixed with frame holders and short tension straps around the wheels. A longer safety strap is also used around the bicycle frames and U-bracket for extra security.

Is this answer helpful?

A

Yes. The padlock is required for use. The rack should only be operated when the quick-lock system is properly engaged and locked.

Is this answer helpful?

A

Keep the rack clean and dry, check bolts and straps regularly, replace worn parts immediately, and lubricate moving parts as needed to maintain safe operation.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Secure quick-lock mounting helps keep the rack firmly attached to the towbar.
  • Includes straps, lock, and frame holders for better bike stability during travel.
  • Folding design makes storage and handling more convenient when not in use.
  • Integrated lighting and license plate support improve road visibility and compliance.
VS

Disadvantages

  • Assembly and setup take time because safety checks and adjustments are required.
  • Only suitable for tow bars that meet specific material and D-value requirements.
  • Maximum load is limited to two bicycles and 50 kg total payload.
  • Must be checked frequently during use, especially straps, lock, and mounting tightness.
M: OA-GPT-54-NAN

Product Specification

Type

Bike rack

Mounting

Rear/Towbar

Capacity for sporting goods

2 Bikes

Suitable tube diameters

up to 3.35in

Max. load

110.23lb

Special features

foldable, Taillights (13-Pin)

Color

black

Dimensions

46.06x26.38x20.47in (LxWxH)

Weight

28.66lb

M: OA-GPT-54-NAN

Product Description

EUFAB Crow Manual: A Practical Look at the CROW Towbar Bike Rack

The EUFAB Crow is a towbar-mounted bike rack designed for drivers who want a sturdy and straightforward way to carry two bicycles. With a payload of up to 50 kg, it aims to balance everyday usability with the safety features needed for road travel. Its 13-pin electrical connection and integrated lighting make it suitable for trips where visibility and legal compliance matter just as much as carrying capacity.

What stands out first is the rack’s focus on secure attachment. The quick-lock system, tension lever, and padlock work together to keep the carrier firmly fixed to the trailer tow bar. The included U-shaped bracket, frame holders, short tension straps, and safety strap show that this model is built around stability rather than convenience alone. That is especially important when transporting bikes on longer journeys or at higher speeds.

The setup process is detailed, but it also reflects the product’s safety-first design. The rack must be fully assembled before use, the towbar must meet strict requirements, and the bikes need to be tied down carefully at the frame, front wheel, and rear wheel. These steps may take a little time, yet they help reduce movement and improve confidence on the road. The 130 km/h speed limit is another reminder that this is a transport solution meant to be used responsibly.

For travelers, the CROW offers a compact and practical format. It can be folded, which makes storage easier when the rack is not in use. Its 13 kg own weight keeps handling manageable, while the included license plate holder and lighting support proper visibility from behind. The design is clearly aimed at regular car owners who need a reliable option for weekend rides, holiday trips, or commuting with bikes.

Notes

  • Always check the towbar compatibility before mounting.
  • Inspect straps, bolts, and the lock before every trip.
  • Do not exceed the rack’s payload or your vehicle’s permitted limits.
  • Keep the towbar and coupling clean and grease-free for best performance.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly