EUFAB Crow Manual
PDF manual · 24 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your EUFAB Crow manual using AI
Get instant AI answers from your EUFAB Crow manual
Ask anything about the EUFAB Crow. Answers come from this manual, with the pages they are based on.
Crow Maintenance Schedule
Before each trip, verify that all straps are undamaged, worn parts are replaced, and the rack is securely mounted on the tow bar.
Regularly check all bolts and nuts and tighten them if necessary to ensure safe operation.
Regularly lubricate rotating and moving parts to maintain smooth function.
Wash off mud or dirt with water after use and store the rack in a clean, dry place.
Immediately replace any damaged or worn parts using only original replacement parts.
Immediately treat any paintwork damage with paint to prevent corrosion.
Ask a Question
Do you recommend Crow?
Yes NoFrequently Asked Questions
It is a towbar-mounted bicycle rack designed to transport two bikes safely on the back of a passenger car. It is meant for private use, not commercial transport.
Is this answer helpful?
The maximum payload is 50 kg. You should also follow the permitted support load of your towbar and the total weight limits of your vehicle.
Is this answer helpful?
The towbar must be approved, made from suitable materials such as steel St52 or grey cast iron GGG52 or better, and have a D-value of at least 7.6 kN.
Is this answer helpful?
No. The instructions state that the rack must not be mounted on aluminum, other light metals, or plastic tow bars because they are not suitable for this load.
Is this answer helpful?
Each bike is fixed with frame holders and short tension straps around the wheels. A longer safety strap is also used around the bicycle frames and U-bracket for extra security.
Is this answer helpful?
Yes. The padlock is required for use. The rack should only be operated when the quick-lock system is properly engaged and locked.
Is this answer helpful?
Keep the rack clean and dry, check bolts and straps regularly, replace worn parts immediately, and lubricate moving parts as needed to maintain safe operation.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Secure quick-lock mounting helps keep the rack firmly attached to the towbar.
- Includes straps, lock, and frame holders for better bike stability during travel.
- Folding design makes storage and handling more convenient when not in use.
- Integrated lighting and license plate support improve road visibility and compliance.
Disadvantages
- Assembly and setup take time because safety checks and adjustments are required.
- Only suitable for tow bars that meet specific material and D-value requirements.
- Maximum load is limited to two bicycles and 50 kg total payload.
- Must be checked frequently during use, especially straps, lock, and mounting tightness.
Product Specification
Type
Bike rack
Mounting
Rear/Towbar
Capacity for sporting goods
2 Bikes
Suitable tube diameters
up to 3.35in
Max. load
110.23lb
Special features
foldable, Taillights (13-Pin)
Color
black
Dimensions
46.06x26.38x20.47in (LxWxH)
Weight
28.66lb
Product Description
EUFAB Crow Manual: A Practical Look at the CROW Towbar Bike Rack
The EUFAB Crow is a towbar-mounted bike rack designed for drivers who want a sturdy and straightforward way to carry two bicycles. With a payload of up to 50 kg, it aims to balance everyday usability with the safety features needed for road travel. Its 13-pin electrical connection and integrated lighting make it suitable for trips where visibility and legal compliance matter just as much as carrying capacity.
What stands out first is the rack’s focus on secure attachment. The quick-lock system, tension lever, and padlock work together to keep the carrier firmly fixed to the trailer tow bar. The included U-shaped bracket, frame holders, short tension straps, and safety strap show that this model is built around stability rather than convenience alone. That is especially important when transporting bikes on longer journeys or at higher speeds.
The setup process is detailed, but it also reflects the product’s safety-first design. The rack must be fully assembled before use, the towbar must meet strict requirements, and the bikes need to be tied down carefully at the frame, front wheel, and rear wheel. These steps may take a little time, yet they help reduce movement and improve confidence on the road. The 130 km/h speed limit is another reminder that this is a transport solution meant to be used responsibly.
For travelers, the CROW offers a compact and practical format. It can be folded, which makes storage easier when the rack is not in use. Its 13 kg own weight keeps handling manageable, while the included license plate holder and lighting support proper visibility from behind. The design is clearly aimed at regular car owners who need a reliable option for weekend rides, holiday trips, or commuting with bikes.
Notes
- Always check the towbar compatibility before mounting.
- Inspect straps, bolts, and the lock before every trip.
- Do not exceed the rack’s payload or your vehicle’s permitted limits.
- Keep the towbar and coupling clean and grease-free for best performance.
Search for 67,706 Manuals online
Type-in Brand or Model
Lukas Meyer
8 months ago
Will this folding hitch bike rack securely carry two e-bikes, including one MTB with wider tires? How easy is it to mount and fold up for storage?
Manual.ly
8 months ago
Yes. Reviews say the rack mounts to the trailer hitch firmly and is quick to use, with one person able to attach and remove it in seconds. The two-bike setup is considered sufficient even for e-bikes. For very wide MTB tires, the tire cradles can be slightly narrow, but the bikes are still held securely by the fastening straps. For storage, the folding mechanism makes the rack compact and easy to fit in a garage, and setup guidance is described as clear and straightforward.