Manual.ly Logo

Epever Upower Series Manual

0.0 · 0 Ratings

PDF manual · 32 Pages

English

M: QW-35-FL
page

/ 32

Loading...
e2c123893155c8c2c164bf128efcce08cb0e page 1
Inverter/charger
User Manual
UP1000/UP1500
UP2000/UP3000
UP5000

Chat with your Epever Upower Series manual using AI

Get instant AI answers from your Epever Upower Series manual

Ask anything about the Epever Upower Series. Answers come from this manual, with the pages they are based on.

Upower Series Maintenance Schedule

Remind me when maintenance is due
Semiannual
Inspect installation and airflow

Ensure the unit is firmly installed in a clean, dry environment. Check that there are no blocks on airflow around the radiator and clear any dirt or fragments.

Show in the manual (page 27)
Semiannual
Check wire insulation

Inspect all naked wires for damage from solarization, friction, dryness, insects, or rats. Repair or replace wires if necessary.

Show in the manual (page 27)
Semiannual
Tighten terminals and inspect connections

Tighten all terminals. Inspect for loose, broken, burnt, corroded, or discolored wire connections and signs of high temperature.

Show in the manual (page 27)
Semiannual
Verify display status

Check that LED or LCD indicators are consistent with actual operation. Address any troubleshooting or error indications immediately.

Show in the manual (page 27)
Semiannual
Confirm grounding

Ensure all system components are ground connected tightly and correctly.

Show in the manual (page 27)
Semiannual
Clean debris and pests

Check for dirt, nesting insects, and corrosion around the device. Clear these out in time to maintain safety and performance.

Show in the manual (page 27)
Semiannual
Inspect lightning arrester

Check and confirm the lightning arrester is in good condition. Replace it immediately if damaged to avoid equipment harm.

Show in the manual (page 27)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Upower Series?

Yes No

Frequently Asked Questions

A

No, the Epever Upower series is designed for single-unit operation only. Connecting them in parallel or series will damage the devices.

Is this answer helpful?

A

The UP5000 models support a maximum PV open-circuit voltage of 200V at minimum operating temperatures and 180V at 25 degrees Celsius.

Is this answer helpful?

A

No, this is strictly an off-grid inverter/charger. It must not be connected to the utility grid as a power source.

Is this answer helpful?

A

You can use the RS485 interface to connect a Wi-Fi module or access the system via PC software or the UPower mobile app for remote monitoring.

Is this answer helpful?

A

The system will disconnect the load to prevent over-discharge once the voltage drops below the set Low Voltage Disconnect threshold.

Is this answer helpful?

A

While lead-acid batteries are standard, other types can be used if configured correctly in the settings according to the manufacturer's specifications.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Advanced MPPT technology delivers up to 99.5% solar tracking efficiency
  • Pure sine wave output protects sensitive electronic devices and appliances
  • Flexible charging modes allow customization for solar or utility priority
  • Remote monitoring via RS485 interface enables convenient system management
  • Comprehensive protection features prevent damage from electrical faults
VS

Disadvantages

  • Requires careful wire sizing and breaker selection to meet safety codes
  • Indoor installation only limits outdoor deployment options significantly
  • Cannot be used in parallel or series configurations with other units
  • Flooded lead-acid batteries require specific ventilation to avoid corrosion
  • Complex parameter settings may require technical knowledge for optimization
M: QW-35-FL

Product Specification

Note

Prices include partial 0% VAT rates for AT and DE

Type

Hybrid inverter

Max input current

30A

Output phases

Single-phase

Input

MC4

Output

Terminals

Interfaces

RJ-45, RS-485

Ambient temperature

-4F to 122F

M: QW-35-FL

Product Description

Epever Upower Series Inverter/Charger: The Heart of Your Off-Grid Energy System

The Epever Upower Series represents a significant leap in energy storage technology, offering a robust solution for off-grid applications ranging from 1000W to 5000W. This all-in-one inverter and charger seamlessly integrates utility charging, solar energy harvesting, and AC output into a single intelligent unit. Designed with advanced multi-core chips and sophisticated control algorithms, the UPower series ensures rapid response times and exceptional transfer efficiency, making it an ideal choice for residential, commercial, and industrial settings.

At the core of its performance lies the optimized MPPT tracking technology, which achieves up to 99.5% efficiency in capturing solar power regardless of environmental conditions. The device intelligently manages the balance between solar and utility inputs, allowing users to customize charging priorities based on their specific needs. Whether you prefer solar priority to maximize green energy usage or utility priority for consistent backup power, the system adapts automatically. The pure sine wave output generated by the advanced SPWM technology ensures compatibility with sensitive electronics, tools, and household appliances without risk of damage.

Installation is straightforward thanks to clear wiring diagrams and comprehensive safety guidelines. The unit features a user-friendly 4.2-inch LCD display that provides real-time data on voltage, current, power, and battery status. Users can easily configure parameters via physical buttons or remotely using PC software and mobile applications through the isolated RS485 interface. Safety is paramount, with built-in protections against over-voltage, under-voltage, short circuits, and overheating. The system also includes temperature compensation and intelligent fan control to maintain optimal operating conditions.

Key Features

  • High Efficiency: Maximum conversion efficiency reaches 98.5% with advanced digital control.
  • Versatile Charging: Supports four distinct modes including Solar Only, Utility Only, and combined sources.
  • Smart Monitoring: Remote management capabilities via Wi-Fi modules and dedicated apps.
  • Robust Protection: Comprehensive safeguards ensure long-term reliability and equipment safety.
  • Pure Sine Wave: Clean power output suitable for all types of AC loads.

Important Notes

Always ensure proper ventilation during installation to prevent heat buildup. Do not install the unit in sealed enclosures when paired with flooded lead-acid batteries due to gas emission risks. Regular maintenance checks are recommended at least twice a year to inspect connections and clean dust from radiators.

M: QW-35-FL

© Copyright 2026 Manual.ly