Manual.ly Logo

Eltako SNT61-230V/24VDC-0.25A Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: QW-35-FL
page

/ 1

Loading...
f349e0a0f7185eef152132949ead80420113 page 1
D
Nennleistung 6W.
Stand-by-Verlust nur 0,1Watt.
Für Einbau- und AP-Montage.
45mm lang, 55mm breit, 33mm tief.
Eingangsspannung 230V (-20% bis
+10 %).
Wirkungsgrad:
SNT61-230V/12V DC-0,5A: 81%.
SNT61-230V/24V DC-0,25A: 82%
Stabilisierte Ausgangsspannung ±1%,
geringe Restwelligkeit.
Kurzschlussfest.
Überlast- und Übertemperatursicherung
durch Abschalten mit automatischem
Zuschalten nach der Fehlerbeseitigung
(Autorecovery-Funktion).
Technische Daten
Restwelligkeit 100mV
Schutzklasse II
Schutzart IP20
Einschaltstrom
1)
18A/230V
Überlastschutz kurzseitig 160-200%
Überspannungsschutz 140-170%
Parallel schaltbar, Anzahl
_
Betriebstemperatur -10/+50°C
1)
Bei primärseitiger Zuschaltung, 2ms.
Schaltnetzteile
SNT61-230V/12V DC-0,5A und
SNT61-230V/24V DC-0,25A
61 000 164 - 1
Diese Geräte dürfen nur durch eine
Elektrofachkraft installiert werden,
andernfalls besteht Brandgefahr oder
Gefahr eines elektrischen Schlages!
Eltako GmbH
D-70736 Fellbach
+49 711 94350000
www.eltako.com
11/2013 Änderungen vorbehalten.
Zum späteren Gebrauch aufbewahren!
GB
Rated capacity 6W.
Standby loss 0.1 watt only.
Built-in device for installation and surface
mounting.
45mm long, 55mm wide, 33mm deep.
Input voltage 230V (-20% up to +10%).
Efficiency:
SNT61-230V/12V DC-0,5A: 81%.
SNT61-230V/24V DC-0,25A: 82%
Stabilised output voltage ±1%,
low residual ripple.
Short-circuit proof.
Overload protection and over-temperature
switch-off by means of swichting off with
automatic switching-on after fault clea-
rance (autorecovery function).
Technical data
Residual ripple 100mV
Class of protection II
Protection degree IP20
Starting current
1)
18A/230V
Overload protection 160-200%
short-term
Overvoltage protection 140-170%
Switchable in parallel, number
_
Operating temperature -10/+50°C
1)
If connected on the primary side, 2ms.
Switching power supply units
SNT61-230V/12V DC-0,5A and
SNT61-230V/24V DC-0,25A
61 000 164 - 1
Only skilled electricians may install
this electrical equipment otherwise
there is the risk of fire or electric
shock!
Eltako GmbH
D-70736 Fellbach
+49 711 94350000
www.eltako.com
11/2013 Subject to change without notice.
Must be kept for later use!
Temperatur an der Einbaustelle:
-10°C bis +50°C.
Lagertemperatur: -25°C bis +70°C.
Relative Luftfeuchte:
Jahresmittelwert <75%.
Temperature at mounting location:
-10°C up to +50°C.
Storage temperature: -25°C up to +70°C.
Relative humidity:
annual average value <75%.
Potencia nominal 6W.
Perdida Stand-by solo 0,1Watt.
Para el montaje en cajas empotradas y
superficie. 45mm de longitud, 55mm
de anchura,
33mm
de profundidad.
Tensión
230V (-20% hasta +10%).
Rendimiento:
SNT61-230V/12V DC-0,5A: 81%.
SNT61-230V/24V DC-0,25A: 82%
Tensión de salida estabilizada ±1%,
ondulación residual minima.
Resistente al cortocircuito.
Protección contra sobretemperatura y
sobrecarga por desconexión, con conexión
automática después de la eliminación
del error (función autorecovery).
Datos técnicos
Ondulación residual 100mV
Clase de protección II
Tipo de protección IP20
Corriente de encender
1)
18A/230V
Protección sobrecarga 160-200%
brevemente
Überspannungsschutz 140-170%
Numero de conexión en
_
paralelo
Temperatura operativo -10/+50°C
1)
En el lado primaria de conmutación, 2ms.
Potenza nominale 6W.
Dispersione in stand-by solo 0,1 Watt.
Per montaggio in scatola da incasso o
a parete. Lunghezza 45mm, larghezza
55mm, profondità
33mm
.
Ingresso di tensione 230V (-20% fino a
+10 %).
Grado di efficienza:
SNT61-230V/12V DC-0,5A: 81%.
SNT61-230V/24V DC-0,25A: 82%
Tensione d'uscita stabilizzata ±1%,
ridotta ondulazione residua.
Protezione contro cortocircuito.
Protezione da sovraccarico e temperature
eccessive con disinnesco e riarmo auto-
matico dopo annullamento guasto
(funzione autorecovery).
Dati tecnici
Onda residua 100mV
Classe di protezione II
Grado di protezione IP20
Corrente di spunto
1)
18A/230V
Protezione sovraccarico 160-200%
temporanea
Protezione sovratensioni 140-170%
Quantità installabile, in parallelo
_
Temperatura di -10/+50°C
funzionamento
1)
Con accensione lato primari, 2ms.
Fuentes de alimentación
SNT61-230V/12V DC-0,5A y
SNT61-230V/24V DC-0,25A
E
Estos dispositivos electrónicos solo
pueden ser instalados por personal
autorizado. En otro caso existe peligro
de fuego o de descarga eléctrica.
Temperatura ambiental:
-10°C hasta +50°C.
Temperatura almacenaje:
-25°C hasta +70°C.
Humedad aire relativa:
Media anual <75%.
I
L'installazione di queste apparec-
chiature elettriche deve essere
eseguita soltanto da personale
qualificato, altrimenti c'è il pericolo
d'incendio o di scariche elettriche!
Temperatura nel luogo di installazione:
-10°C fino a +50°C.
Temperatura di deposito:
-25°C fino a +70°C
Umidità relativa: media annua <75%
Alimentatori
SNT61-230V/12V DC-0,5A e
SNT61-230V/24V DC-0,25A
61 000 164 - 161 000 164 - 1
Eltako GmbH
D-70736 Fellbach
+49 711 94350000
www.eltako.com
11/ 2 013
Reservado el derecho de modificación.
Guardarlo para el uso posterior!
Eltako GmbH
D-70736 Fellbach
+49 711 94350000
www.eltako.com
11/2013 Salvo modifiche
.
Conservare per un uso successivo!

Chat with your Eltako SNT61-230V/24VDC-0.25A manual using AI

Get instant AI answers from your Eltako SNT61-230V/24VDC-0.25A manual

Ask anything about the Eltako SNT61-230V/24VDC-0.25A. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend SNT61-230V/24VDC-0.25A?

Yes No

Frequently Asked Questions

A

The rated capacity is 6 Watts, designed for low-power applications requiring stable 24 Volt DC output. This allows for reliable operation of small electronic loads and sensors.

Is this answer helpful?

A

Yes, the device is short-circuit proof and includes automatic recovery mechanisms after the fault is cleared to prevent continuous damage during errors.

Is this answer helpful?

A

No, the IP20 protection degree indicates it is not resistant to water spray or rain, making it suitable only for dry indoor environments.

Is this answer helpful?

A

Yes, it provides short-term overload protection between 160 to 200 percent of capacity before shutting down to protect internal components from failure.

Is this answer helpful?

A

The maximum operating temperature is 50 degrees Celsius, ensuring safe performance within heated industrial or commercial settings without thermal shutdowns.

Is this answer helpful?

A

Only qualified skilled electricians may install this equipment to ensure compliance with safety standards and avoid risks of fire or electric shock.

Is this answer helpful?

A

The 24 Volt Direct Current model achieves an efficiency rate of 82 percent, significantly reducing wasted energy during conversion compared to older transformer styles.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High efficiency reaching up to 82 percent
  • Compact dimensions suitable for confined spaces
  • Autorecovery function protects against faults
  • Low standby power consumption
  • Short-circuit proof construction
VS

Disadvantages

  • Requires skilled electrician for installation
  • Limited current output of 0.25 Ampere
  • IP20 rating prevents outdoor waterproof use
  • Minimum input surge of 18 Amperes
  • Restricted operating temperature range
M: QW-35-FL

Product Specification

Type

Power supply

Standard

EnOcean, Wireless Bus (868MHz)

Function

Power supply

Dimensions

1.77x1.77x1.30 in

Features

IP20

M: QW-35-FL

Product Description

Reliable Power Solutions for Modern Installations

In the realm of electrical engineering and building automation, finding a dependable power source is paramount. The Eltako SNT61-230V/24VDC-0.25A Switching Power Supply Manual highlights the robust design of this specific unit, ensuring stability across various applications. This compact device offers a rated capacity of 6 Watts while maintaining an incredibly low standby loss of just 0.1 Watt. Its small footprint measures 45mm in length, 55mm in width, and 33mm in depth, making it ideal for tight spaces within distribution boards or behind panels.

Efficiency is a key metric for professional installers, and this unit excels with an impressive 82 percent efficiency rate for the 24 Volt direct current configuration. The stabilized output voltage remains within plus or minus 1 percent tolerance, accompanied by minimal residual ripple measured at 100 millivolts. This level of precision ensures connected devices operate without interference or damage from unstable power conditions. Furthermore, the input voltage accommodates fluctuations between minus 20 percent and plus 10 percent relative to the nominal 230 Volts, providing resilience against grid instability.

Safety features are integrated deeply into the hardware architecture. The system includes short-circuit proofing alongside overload protection capable of handling transient surges up to 200 percent of capacity. In the event of overheating, the device automatically shuts off and resets once normal temperatures resume, known as an autorecovery function. This prevents permanent damage during fault conditions. However, installation must strictly adhere to safety protocols because only qualified electricians are authorized to handle this equipment. Failure to comply could result in fire hazards or severe electric shock risks.

Operating parameters define the environmental boundaries for longevity. The unit functions reliably within temperatures ranging from negative 10 degrees Celsius to positive 50 degrees Celsius. Storage conditions are broader, extending down to negative 25 degrees Celsius and up to positive 70 degrees Celsius. Relative humidity should ideally remain below 75 percent annually to maintain insulation integrity. While the protection class is II, the ingress protection rating is IP20, meaning it protects against solid objects larger than 12 millimeters but offers no water resistance.

Final Considerations

When referencing the Eltako SNT61-230V/24VDC-0.25A Switching Power Supply Manual, users understand the critical importance of adhering to installation guidelines. Parallel switching is permissible to increase total load capacity where appropriate. By respecting these technical specifications, professionals ensure a safe and efficient energy distribution network suitable for lighting and control systems. Regular maintenance checks of the operating temperature and ventilation can further extend the useful life of the equipment.

M: QW-35-FL

© Copyright 2026 Manual.ly