Manual.ly Logo

Eltako MFZ12DBT-UC Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
17b2d2629dec4c14111d47d5cb6cbf95cf38 page 1
Digital settable Multifunction
Time Relay with Display
and Bluetooth
MFZ12DBT-UC
GB
23 001 003 - 1
Temperature at mounting location:
-20°C up to +50°C.
Storage temperature: -25°C up to +70°C.
Relative humidity:
annual average value <75%.
Only skilled electricians may install this
electrical equipment otherwise there is
the risk of  re or electric shock!
Eltako Connect app download:
https://eltako.com/redirect/eltako-connect
Digital settable multifunction time relay
with display and Bluetooth with Eltako
Connect app. With 18 functions. 1 CO con-
tact potential free 10 A/250 V AC. 230 V
LED lamps up to 200 W, incandescent
lamps 2000 W*. With display lighting.
Standby loss 0.1-0.3 watt only.
Modular device for DIN-EN 60715 TH35 rail
mounting.
1 module = 18 mm wide, 58 mm deep.
With the patented Eltako Duplex technolo-
gy (DX) the normally potential-free con-
tacts can still switch in zero passage
when switching 230 V AC 50 Hz and there-
fore drastically reduce wear. Simply con-
nect the neutral conductor to the terminal
(N) and L to 15 (L) for this. This gives an
additional standby consumption of only
0.1 Watt.
Universal control voltage 12..230 V UC.
Supply voltage same as the control voltage.
Both functions and times are entered at the
touch of a key and indicated digitally on an LC
display. Only two keys are required for this pur-
pose.
When setting the time all values can be entered
within preset time ranges (0.1 to 9.9 or 1 to 99
seconds, minutes or hours). The longest possi-
ble setting is 99 hours. 600 settings are possi-
ble. The time setting is continuously displayed
digitally.
By using a bistable relay coil power loss and
heating is avoided even in the on mode.
The switched consumer may not be connected
to the mains before the short automatic syn-
chronisation after installation has terminated.
Functions
RV = off delay
AV = operate delay
AV+ = operate delay additive
TI = clock generator starting with
impulse
TP = clock generator starting with pause
IA = impulse controlled pickup delay (e.g.
automatic door opener)
IF = pulse shaper
EW = eeting NO contact
AW = eeting NC contact
EAW = eeting NO contact and  eeting NC
contact
ARV = operate and release delay
ARV+ = operate and release delay additive
ES = impulse switch
SRV = release-delay impulse switch
ESV = impulse switch with release delay and
switch-off early- warning function
ER = relay
ON = permanent ON
OFF = permanent OFF
With TI, TP, IA, EAW, ARV and ARV+ functions,
a different second time can be entered also
with different time ranges.
The time relay is set either via Bluetooth
with the app or with the MODE and SET but-
tons, a button lock is possible.
The display lighting is switched on by pres-
sing MODE or SET for the  rst time.
20 seconds after you last press MODE or
SET, the program returns automatically to
normal display and the display illumination
goes off.
Connect the time relay to the app:
Press SET, the display shows BLE (Blue-
tooth) and the ID of the time relay. The con-
nection to the app can now be established
(delivery state PIN 123123).
Scan the QR code on the operating instruc-
tions, the app guides you through the lear-
ning process. After the connection to the
app has been established, BLE+ appears in
the display. The MODE and SET buttons are
now locked. After 20 minutes without inter-
acting with the time relay, the connection is
automatically disconnected.
Change PIN: The PIN for the Bluetooth con-
nection can be changed in the app under
the Device PIN entry.
Bluetooth reset (delete any changed PIN):
The connection to the app must be discon-
nected. Press MODE and SET simultaneous-
ly for 2 seconds, RES ashes in the display.
Now press SET for 2 seconds, bLE appears
in the display. If you con rm with SET, the
BLE reset is carried out, the PIN is deleted
and the delivery status is restored.
Set the time relay with the MODE and SET
buttons:
Pressing the MODE button selects the LCD
element to be changed. The element cur-
rently being accessed  ashes. Pressing the
SET button changes the element being ac-
cessed. This can be the function, time
frame, time T1 or time T2 (TI, TP, IA, EAW,
ARV and ARV+ only). Each entry is termina-
ted with the MODE key. After setting the
time with MODE, no element  ashes anymo-
re - the time relay is ready for operation.
Press the MODE key again to restart the in-
put cycle. All the entered parameters are
retained if they are not changed using SET.
25 sec. after the last operation and if the
component still  ashes the input cycle is
automatically terminated and the previous-
ly made changes lapse.
Functions of the LC display:
If the ON or OFF function was selected, no
time is dis played, only ON and OFF and a
contact symbol in the correct position. On
all other functions, the set time, the func-

Chat with your Eltako MFZ12DBT-UC manual using AI

Get instant AI answers from your Eltako MFZ12DBT-UC manual

Ask anything about the Eltako MFZ12DBT-UC. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend MFZ12DBT-UC?

Yes No

Frequently Asked Questions

A

Download the Eltako Connect app and press SET until BLE appears. Scan the QR code or enter the default PIN. Press SET to confirm pairing. After 20 minutes of inactivity, the connection disconnects automatically.

Is this answer helpful?

A

The device operates with a universal control voltage ranging from 12 to 230 Volts AC or DC. Supply voltage matches the control voltage requirements for proper function.

Is this answer helpful?

A

Yes. Set parameters are stored in an EEPROM memory chip. When power supply is restored after a failure, settings are immediately available again without needing reconfiguration.

Is this answer helpful?

A

Yes. Only skilled electricians may install this electrical equipment. Failure to comply creates risks of fire or electric shock. Terminal screws must be tightened correctly for testing functionality.

Is this answer helpful?

A

It occupies one module space equal to 18 millimeters wide. Depth is 58 millimeters. It mounts onto a standard DIN-EN 60715 TH35 rail fitting into compact distribution boards.

Is this answer helpful?

A

Rated switching capacity is 10 Amps at 250 Volts AC. Load handling varies slightly based on timing duration, with higher capacity allowed for longer cycles above five minutes.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Bluetooth integration allows remote control via smartphone app
  • Eighteen distinct operational modes cover various automation needs
  • Low standby power consumption saves energy over time
  • Patented duplex technology reduces mechanical contact wear
  • Clear LC display provides visual feedback during setup
VS

Disadvantages

  • Installation requires specialized knowledge by qualified electricians
  • Neutral conductor must be connected for zero crossing switching
  • Maximum load capacity reduces for shorter timing cycles
M: QW-35-FL

Product Specification

Type

Switch

Standard

Bluetooth

Function

Switching (On/Off)

Features

Display, controllable via app (Android, iOS)

M: QW-35-FL

Product Description

Transform Your Lighting Control With Modern Technology

Welcome to the future of electrical timing systems. The Eltako MFZ12DBT-UC Time Relay stands out as a sophisticated solution for residential and commercial automation needs. This device combines traditional reliability with cutting-edge digital features. It allows users to manage electrical loads with precision while enjoying the convenience of wireless integration. Many facility managers seek robust tools that simplify maintenance schedules. This relay delivers exactly that by offering programmable logic directly through a handheld device or physical buttons for local control.

Advanced Connectivity Options

One of the standout features is the built-in Bluetooth capability. Users can easily connect this module to the dedicated Eltako Connect app on their smartphone. This eliminates the need for complex wiring setups for configuration tasks. You can adjust settings remotely or locally using the intuitive interface on the digital screen. The pairing process is straightforward, involving a simple scan of the QR code or manual entry of the default PIN. Once connected, your control options expand significantly allowing for dynamic adjustments anywhere within range. Security is maintained through changeable PIN settings to prevent unauthorized access attempts. The interface guides you through learning processes step-by-step ensuring correct operation every time. Wireless control makes troubleshooting easier for technicians visiting the site periodically.

Versatile Functionality Meets Efficiency

This multifunction unit offers eighteen distinct operational modes suitable for various applications. Whether you need an off-delay timer for ventilation fans or a clock generator for street lighting, this relay handles it all. The digital LC display ensures clarity during setup operations. Settings such as durations can range from fractions of a second up to ninety-nine hours. Furthermore, standby consumption remains remarkably low at just 0.1 to 0.3 watts per cycle. This contributes to overall energy conservation without sacrificing performance over long periods. Heat generation is minimized due to bistable relay coils preventing unnecessary power loss during active states. The system retains data even after complete power interruption ensuring consistency upon restart. This feature prevents downtime during grid fluctuations.

Robust Design for Professional Installations

Constructed for DIN rail mounting, this unit fits seamlessly into existing distribution boards without requiring custom brackets. It measures only eighteen millimeters in width saving valuable space inside crowded panels. The patented Duplex technology minimizes mechanical wear by switching contacts near the zero crossing point when handling AC loads safely. This protects both the relay mechanism and the connected devices from sudden power surges damaging sensitive electronics. Safety is paramount so installation should strictly be performed by qualified electricians to avoid electrical hazards or fire risks. Despite its compact size it supports significant loads up to ten amps at two hundred fifty volts effectively managing household appliances. The operating temperature range covers wide extremes making it suitable for various climates globally. Experience reliable automation today with this advanced time relay designed for modern infrastructure demands.

M: QW-35-FL

© Copyright 2026 Manual.ly