Manual.ly Logo

Eltako FT4F Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 1

Loading...
ee42a27b1ad38d918a94b24296b036eab901 page 1
FT4F-:
Wireless at pushbuttons, 80x80 mm external
dimensions, internal frame dimensions
63x63 mm, 15 mm high. Generates the power
for wireless telegrams itself when the button
is pressed, therefore there is no connecting
wire and no standby loss.
The scope of supply comprises the frame
R1F, a  at rocker WF, a  at double rocker
DWF (all same colour), an attachment frame
BRF, the mounting base HP, the wireless
module and one adhesive foil.
FT55-:
Wireless pushbuttons, 80x80 mm external
dimensions, internal frame dimensions
55x55 mm, 15 mm high.
Generates the power for wireless telegrams
itself when the button is pressed, therefore
there is no connecting wire and no standby
loss.
The scope of supply comprises the frame R,
a rocker W55, a double rocker DW55 (all
same colour), an attachment frame BRF, the
mounting base HP, the wireless module and
one adhesive foil.
Wireless pushbuttons with one rocker can
transmit two evaluable signals: press rocker
up and press rocker down. Wireless push-
buttons with double rocker can transmit
four evaluable signals: press two rockers up
or down.
The mounting base can be screwed onto a
at surface or glued to the wall, on glass or
on furniture using the enclosed adhesive
foil. Use the sleeves in the 55 mm socket
box for screw mounting.
Wireless sensor
Wireless  at pushbuttons
FT4F-
Wireless pushbuttons FT55-
GB
Temperature at mounting location:
-20°C up to +50°C.
Storage temperature: -25°C up to +70°C.
Relative humidity:
annual average value <75%.
30 000 595 - 1
The double rocker is snapped onto the
wire-
less module at the factory. If the double rocker
is replaced by the large rocker, remove the
rocker halves by pulling off to the front. Do
not bend towards the middle. Then snap the
large rocker so that the markings 0 and I on
the back line up with the same markings on
the wireless module.
Adhesion: First adhere the set
comprising
the mounting base, frame and attachment
frame
- with the latches pointing at the top
and bottom. Then snap on the set
comprising
the wireless module and rocker
- with the
marking 0 on the back always pointing up.
Before screwing, remove the mounting
base from the frame and the attachment
frame. To do this, press the latches on the
mounting base outwards. Then screw the
mounting base - with the latches at top and
bottom -, snap on the frame with the attach-
ment frame and snap on the set
comprising
the wireless module and rocker
- with the
marking 0 on the back always pointing to
the top.
For screw mounting, we recommend stain-
less steel countersunk screws 2.9x25 mm,
DIN 7982 C, for screw connections. Both
with rawl plugs 5x25 mm and with 55 mm
switch boxes.
The Eltako frame can be replaced on
installation at any time by a design frame
with the same internal dimensions from
other manufacturers. FT4F: 63x63 mm,
FT55: 55x55 mm.
The wireless module integrated in the
wireless pushbuttons can be taught-in
encrypted in all encryptable actuators of
the 61 Series, 62 Series and Series 71 as
well as the FAM14. This requires the FTVW
wireless pushbutton encryption rocker.
Encryptable actuators bear the pictogram
.
Pushbuttons with engraving +0I:
If wireless pushbuttons are taught-in as
direction switches in a building, it is then
recommended to  t any central control switch
with the engraving 0/I rotated through 180°.
Then the central switch-on (I) is at the top
as well as the switch-on for the direction
switches.
Teaching-in wireless sensors in wire-
less actuators
All sensors must be taught-in in the
actuators so that they can detect and
execute commands.
The teach-in process is described in the
operating instructions of actuators.
Manuals and documents in further
languages
http://eltako.com/redirect/FT4F-_FT55-
1. App 2. 3.
www.
Frequency 868.3 MHz
Transmit power max. 10 mW
Hereby, Eltako GmbH declares that the radio
equipment type FT4F-, FT55- is in com-
pliance with Directive 2014/53/EU.
The full text of the EU declaration of
conformity is available at the following
internet address: eltako.com
Must be kept for later use!
Eltako GmbH
D-70736 Fellbach
Technical Support English:
+49 711 943 500 25
technical-support@eltako.de
eltako.com
42/2022 Subject to change without notice.

Chat with your Eltako FT4F manual using AI

Get instant AI answers from your Eltako FT4F manual

Ask anything about the Eltako FT4F. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend FT4F?

Yes No

Frequently Asked Questions

A

Yes, it generates energy from the press of the key so no wiring or power outlet is needed.

Is this answer helpful?

A

It works between minus 20 and plus 50 degrees Celsius for operation.

Is this answer helpful?

A

It can send four evaluable signals by pressing top and bottom of two levers.

Is this answer helpful?

A

Yes, if the internal dimensions match 63x63 mm for FT4F or 55x55 mm for FT55.

Is this answer helpful?

A

Yes, the module supports encryption with compatible actuators and the FTVW switch.

Is this answer helpful?

A

Yes, the module fits standard boxes or can be mounted on flat surfaces.

Is this answer helpful?

A

It operates on 868.3 MHz frequency for reliable wireless communication.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Self-powered design allows wireless installation without external wiring.
  • Multiple signal options available with single and double rocker configurations.
  • Compatible with frames from other manufacturers provided dimensions are correct.
  • Supports encrypted signal transmission for enhanced security against interference.
  • Can be screwed or glued making installation versatile for various surfaces.
VS

Disadvantages

  • Requires manual learning process for each device before control signals work.
  • Double rocker exchange requires careful handling to avoid bending the halves.
  • Specific mounting frames needed depending on the internal switch box size.
  • Operating temperature limit may restrict use in extreme cold outdoor areas.
  • Frequency usage might need verification to comply with local regulations.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Sensor

Standard

Wireless Bus

Function

Pushbutton

Topology

Star

Dimensions

3.15x3.15x0.59 in

M: qwen/qwen3.5-flash-20260224

Product Description

The Eltako FT4F Revolution

Exploring the world of smart home automation often leads homeowners to wonder how to implement wireless controls for residential settings without messy wiring solutions. The Eltako FT4F Manual serves as a detailed guide to understanding these innovative devices that revolutionize standard switching tasks. When you consider the Eltako FT4F product you are looking at a surface functional pushbutton designed for seamless integration into modern environments. This device stands out because it generates energy directly from the press of the key eliminating the need for external power cables or constant standby losses. This self-powering mechanism ensures that the switch works wherever you install it without hunting for a power outlet or cabling infrastructure.

Installation And Usage

Installation flexibility is a major highlight of this system. Whether you are attaching the unit securely using screws from behind or simply using the provided adhesive foil on glass wood or flat walls the options are extensive. The holding plate can be mounted over a standard 55 mm switch box or attached directly to a flat surface. One of the most practical aspects involves the frame compatibility. You can swap the existing Eltako frame for a frame from another manufacturer as long as the internal dimensions match specific requirements like 63x63 mm for the FT4F model. This ensures that renovation or customization projects remain visually consistent without compromising functionality.

Signal And Security

Signal capability is another crucial factor for users seeking advanced control schemes in their automated systems. A simple pushbutton with a single lever can transmit two distinct signals by pressing the top or bottom half repeatedly. Meanwhile the double rocker version offers four evaluable signals allowing for complex automation sequences and directional control logic. Security features are also included as the radio module encodes signals compatible with encrypted actuators from specific series ensuring safety against unauthorized interference or signal jamming. The included list usually consists of the frame rocker options mounting hardware and the radio module itself inside the packaging box.

Temperature resilience makes these units suitable for various conditions operating reliably between minus 20 and plus 50 degrees Celsius. Storage temperatures can go as low as minus 25 degrees Celsius allowing for harsh environments during shipping and storage. Users should note that the learning process into actors must be followed according to separate actor instructions to ensure pairing works correctly. The frequency operated at 868.3 MHz ensures reliable transmission in most standard wireless protocols available in this region. Compliance with European regulations guarantees safety and performance standards are met globally for long term use of the system components. Frequency selection confirms compatibility for local standards.

Notes

Adjustable parts allow for simple replacement later without needing replacement of the entire unit. This modularity supports long term adaptability for changing needs in smart home environments.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly