Manual.ly Logo

Eltako FRP61-230V Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: gpt-5.6-terra
page

/ 1

Loading...
8d10df5078554494ee142cf0d68d65d03219 page 1
1 and 2 level wireless repeaters.
Only 0.7 watt standby loss.
For installation.
45mm long, 45mm wide, 18mm deep.
Supply voltage 230V.
This repeater is only needed if the
building conditions prevent undisturbed
reception or the distance between the
wireless pushbutton and receiver is too
great.
The 1-level mode is activated ex works.
Only wireless signals from sensors are
received, tested and retransmitted at full
transmit power. Wireless signals from
other repeaters are ignored to reduce the
data volume.
Use the rotary switch to switch over to
2 level mode. Then the wireless signals
from sensors and from another 1 level
repeater are processed.
A signal may therefore be received and
amplified twice.
The LED indicates incoming wireless
signals by flashing briefly.
Wireless repeaters need not be taught-
in. They receive and amplify signals
from all wireless sensors within their
reception area.
Typical connection
GB
Only skilled electricians may install
this electrical equipment otherwise
there is the risk of fire or electric
shock!
Temperature at mounting location:
-20°C up to +50°C.
Storage temperature: -25°C up to +70°C.
Relative humidity:
annual average value <75%.
Wireless repeater
FRP61-230V
30 000 350 - 3
valid for devices from production week
26/18 (see bottom side of housing)
Typical connection
L
N
LL
N
N
EnOcean wireless
Frequency 868.3MHz
Transmit power max. 10mW
Hereby, Eltako GmbH declares that the
radio equipment type FRP61-230V is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of
conformity is available at the following
internet address: eltako.com
Must be kept for later use!
Eltako GmbH
D-70736 Fellbach
Technical Support English:
Michael Thünte +49 176 13582514
Marc Peter +49 173 3180368
eltako.com
26/2018 Subject to change without notice.

Chat with your Eltako FRP61-230V manual using AI

Get instant AI answers from your Eltako FRP61-230V manual

Ask anything about the Eltako FRP61-230V. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend FRP61-230V?

Yes No

Frequently Asked Questions

A

It extends EnOcean wireless coverage when construction materials, installation conditions, or long distances prevent reliable communication between wireless sensors, pushbuttons, and receivers.

Is this answer helpful?

A

No. The repeater does not require teach-in. It receives and retransmits radio signals from EnOcean wireless sensors within its reception area.

Is this answer helpful?

A

One-level mode is the factory setting. The repeater receives sensor signals, verifies them, and retransmits them at full power. Signals from other repeaters are ignored to reduce radio traffic.

Is this answer helpful?

A

Use two-level mode when a single repeater does not provide enough coverage. It can process signals from sensors and from another one-level repeater, allowing a signal to be repeated up to two times.

Is this answer helpful?

A

The LED flashes briefly when the repeater receives an incoming wireless signal. This offers a basic visual indication that radio traffic is reaching the device.

Is this answer helpful?

A

The FRP61-230V requires a 230 V supply voltage. Because it is connected to mains voltage, installation must be performed by a qualified electrician.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Supports one-level and two-level repeating for flexible EnOcean radio range extension.
  • No teach-in is required; it automatically relays signals from EnOcean sensors in range.
  • Compact 45 x 45 x 18 mm format is suitable for concealed electrical installation.
  • Low standby power consumption of only 0.7 W supports efficient continuous operation.
  • LED flashes briefly for incoming radio signals, helping confirm reception activity.
VS

Disadvantages

  • Requires a permanent 230 V supply and installation by a qualified electrician.
  • Two-level mode can increase radio traffic compared with the default one-level mode.
  • It is designed for EnOcean 868.3 MHz systems and is not a universal repeater.
  • Placement is critical, since it addresses range and reception obstacles rather than every wireless fault.
M: gpt-5.6-terra

Product Specification

Type

Repeater

Standard

Wireless bus (868 MHz)

Function

Signal amplification

Dimensions

1.77 x 1.77 x 0.71 in

Special features

IP20

M: gpt-5.6-terra

Product Description

Eltako FRP61-230V Repeater Manual: Extending Reliable EnOcean Radio Coverage

The Eltako FRP61-230V Repeater is a compact wireless signal booster designed for EnOcean installations where walls, ceilings, long distances, or building materials weaken radio communication. It supports reliable operation between wireless sensors, pushbuttons, and compatible receivers by receiving a signal, checking it, and retransmitting it at full transmission power.

With its 230 V supply voltage and small dimensions of 45 x 45 x 18 mm, the repeater is intended for concealed installation. Its compact housing makes it practical for integration into electrical installations where space is limited. Standby consumption is only 0.7 W, helping keep permanent energy use low while supporting continuous wireless coverage.

One-Level and Two-Level Repeating

The Eltako FRP61-230V Repeater Manual functionality centers on two selectable operating modes. The factory setting is one-level mode. In this mode, the unit processes signals sent directly by EnOcean sensors and retransmits them, while ignoring signals from other repeaters. This approach reduces unnecessary radio traffic and is suitable for most installations requiring a single coverage extension.

A rotary switch can activate two-level mode when additional range is needed. In this setting, the repeater also processes signals received from another one-level repeater. A wireless signal can therefore be received and amplified up to two times. This is useful in larger buildings or challenging layouts where one repeater is not enough to bridge the distance between a sensor and receiver.

Simple Operation and Installation Considerations

No pairing or teach-in procedure is required for the FRP61-230V. It automatically receives and strengthens radio signals from EnOcean wireless sensors within its reception range. A brief LED flash indicates incoming radio traffic, providing a simple visual confirmation that signals are reaching the unit.

The repeater operates on the 868.3 MHz EnOcean radio frequency with a maximum transmission power of 10 mW. It is suitable for installation environments from -20 C to +50 C, while storage temperatures may range from -25 C to +70 C. For dependable performance, the installation location should avoid excessive humidity, with an annual average relative humidity below 75%.

Note: Installation on a 230 V electrical supply must be completed by a qualified electrician. Correct placement is important: use a repeater only where reception is obstructed or the distance between wireless controls and receivers is too great.

The Eltako FRP61-230V provides a focused solution for improving EnOcean radio reach without complicated programming. Its selectable repeat levels, low standby power, and compact installation format make it a practical addition to smart building and wireless switching systems.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly