Manual.ly Logo

Eltako FPE-1 Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: gpt-5.6-terra
page

/ 1

Loading...
13f44dbd2d73c747380d42952e962cbcd3fa page 1
Wireless position switch with energy
generator 48 x 32 x 11.5 mm. Generates the
power for wireless telegrams itself when
the lever is pressed, therefore there is no
battery, no connecting wire and no stand-
by loss.
When pressing the operating lever a wireless
telegram Data (hex) 0x10 is sent and when re-
leasing Data (hex) 0x00 is sent, like a wireless
pushbutton.
For more than 100,000 switching cycles,
replaceable compression spring.
Fastening by screws. Adhesive fastening is
not recommended due to the high restoring
force.
The 48 mm long lever can be shorted to
27 mm by removing part of it.
The wireless module integrated in the
wireless position switch can be taught-in
encrypted in all encryptable actuators of
the Series 61, 62 and Series 71 as well as
the FAM14. This requires the wireless
encryption plug FVST. Encryptable
actuators bear the pictogram
.
Position switch FPE-1
Wireless sensor with
energy generator
GB
Temperature at mounting location:
-20°C up to +50°C.
Storage temperature: -25°C up to +70°C.
Relative humidity:
annual average value <75%.
30 000 398 - 2
Activate encryption:
Insert the encryption plug and push the lever.
Frequency 868.3 MHz
Transmit power max. 10 mW
Hereby, Eltako GmbH declares that the radio
equipment type FPE-1 is in com pliance with
Directive 2014/53/EU.
The full text of the EU declaration of
conformity is available at the following
internet address: eltako.com
Must be kept for later use!
Eltako GmbH
D-70736 Fellbach
Technical Support English:
+49 711 94350025
technical-support@eltako.de
eltako.com
46/2020 Subject to change without notice.
Deactivate encryption:
Insert the encryption plug and push the lever.

Chat with your Eltako FPE-1 manual using AI

Get instant AI answers from your Eltako FPE-1 manual

Ask anything about the Eltako FPE-1. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend FPE-1?

Yes No

Frequently Asked Questions

A

An integrated energy generator produces the energy for each radio telegram when the lever is pressed. This removes the need for a battery, external power wiring, and standby power consumption.

Is this answer helpful?

A

Pressing the lever transmits hexadecimal data value 0x10. Releasing the lever transmits hexadecimal data value 0x00. This behavior is similar to a wireless pushbutton with separate press and release states.

Is this answer helpful?

A

The radio module can be paired with encryptable actuators in Eltako Series 61, 62, and 71, plus the FAM14. Confirm that the receiving device supports encryption if secure pairing is needed.

Is this answer helpful?

A

Yes. The FPE-1 can be enrolled with encryption in compatible Eltako actuators. An FVST radio encryption plug is required to activate or deactivate the encrypted pairing process.

Is this answer helpful?

A

Yes. The supplied 48 mm lever can be shortened to 27 mm by removing part of the lever. This can help when the switch must fit within a more restricted mounting area.

Is this answer helpful?

A

Mount the FPE-1 by screwing it into place. Adhesive mounting is discouraged because the higher return force of the lever can reduce the reliability of an adhesive attachment.

Is this answer helpful?

A

The installation temperature range is -20 C to +50 C. Storage is rated from -25 C to +70 C. The recommended annual average relative humidity is below 75 percent.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Self-powered energy generator eliminates batteries, supply wiring, and standby consumption.
  • Press and release actions transmit separate radio values for clear position signaling.
  • Designed for more than 100,000 switching cycles with a replaceable pressure spring.
  • Compatible with encryptable Eltako Series 61, 62, 71 actuators and FAM14.
  • Lever can be shortened from 48 mm to 27 mm for tighter installations.
VS

Disadvantages

  • Screw mounting is required; adhesive fixing is not recommended due to lever return force.
  • Secure pairing needs a separate FVST radio encryption plug.
  • Compatibility is limited to suitable Eltako radio receivers and actuators.
  • The switch is intended for average annual humidity below 75 percent.
M: gpt-5.6-terra

Product Specification

Type

Actuator

Standard

Radio bus (868 MHz)

Function

Switch actuator (on/off)

Topology

Bus

Dimensions

1.89 x 1.26 x 0.45 in

Special features

IP20

M: gpt-5.6-terra

Product Description

Eltako FPE-1 Wireless Position Switch with Energy Generator, Wall Switch Manual

The Eltako FPE-1 Wireless Position Switch with Energy Generator is a compact radio-operated position switch designed for dependable status detection without batteries, wiring, or standby power use. Its self-powered design makes it a practical choice for automation projects where conventional cabling is inconvenient or where long-term maintenance should be kept to a minimum.

Measuring just 48 x 32 x 11.5 mm, this compact switch can be installed in a variety of control and monitoring applications. It uses an integrated energy generator that creates the power needed for each radio transmission when the operating lever is pressed. This means the device needs no battery replacement and no external power connection, helping simplify installation and reduce ongoing service requirements.

Wireless switching behavior

When the lever is pressed, the FPE-1 transmits a radio telegram with hexadecimal data value 0x10. When the lever is released, it sends data value 0x00. This operation is comparable to a wireless pushbutton, allowing compatible automation components to identify both lever positions. The switch communicates at 868.3 MHz and has a maximum transmission power of 10 mW.

The unit is built for more than 100,000 switching cycles. Its pressure spring is replaceable, which can support a longer useful service life in applications with frequent mechanical actuation. The standard lever is 48 mm long and can be shortened to 27 mm by removing part of it, offering more flexibility where installation space is limited.

Installation and compatibility

For reliable mechanical operation, the Eltako FPE-1 should be fixed using screws. Adhesive mounting is not recommended because the lever's return force may place too much load on an adhesive connection. Proper screw mounting helps ensure consistent switching behavior over time.

The integrated radio module can be paired with encryptable Eltako actuators from the Series 61, 62, and 71 ranges, as well as the FAM14. Secure pairing requires the FVST radio encryption plug. Supported actuators are identified by the relevant encryption symbol.

The switch is suitable for installation temperatures from -20 C to +50 C and storage temperatures from -25 C to +70 C. It is intended for environments with an annual average relative humidity below 75 percent.

Note: Choose a rigid mounting surface and confirm compatibility with the intended Eltako receiver before installation. Use the FVST encryption plug when secure radio communication is required.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly