Manual.ly Logo

Eltako FKS-SV Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: QW-35-FL
page

/ 1

Loading...
3fe18f3c07be2ef4f85c48cbd9eb11fe6801 page 1
Wireless small actuator Smart Valve for
radiators. Without battery and wire. With
thermic Energy Harvesting. Smart Home
sensor.
Bidirectionale wireless with EnOcean protocol
EEP A5-20-01.
Function
The actuator obtains its power supply from
the temperature difference (ΔT>4K) between
the radiator and the room.
The internal storage device prevents power
supply bottlenecks needed to run the actuator.
Applications
The actuator is designed both for use in private
homes and in industrial premises. In rooms
that are seldom heated, it may be necessary
to recharge the device via the micro-USB.
Note:
This small actuator must be operated with
an additional room temperature sensor/
controller, either via a Professional Smart
Home Controller or a FUTH.
Installation
The actuator can be  tted directly to valves
with a thread of M30 x 1.5. Metal adapters
which are available on the web or in specialist
shops can be used to  t them to valves with
different mounting options.
As-delivered state
When delivered the pin is fully retracted. If
the pin is not retracted, insert a thin stylus
into the pushbutton opening and press the
pushbutton for 3 to 6 seconds.
Small actuator
FKS-SV
GB
Temperature at mounting location:
0°C up to +40°C.
Storage temperature: -25°C up to +70°C.
Relative humidity:
annual average value <75%.
30 000 413 - 1
Installation and start
1. Remove the existing control valve from
the radiator.
2. Fit the actuator.
3. Set the wireless thermo clock/hygrostat
FUTH to teach-in mode.
4. Brie y press the pushbutton on the ac-
tuator once.
- The FUTH con rms successful teach-in
with 'Telegram r
eceived'.
- The actuator executes a reference run
and assumes the setpoint of the FU
TH.
Normal mode
The actuator communicates with the wire-
less clock/hygrostat FUTH by wireless every
10 mins: The actuator adopts the new set
values and uses them to control the heating.
If you need an additional query of the setpoint
between the normal transmission interval
(e.g. for quick acceptance of the new setpoint
after changing the temperature speci cation
in the room), then brie y press the button once.
Status-LED
The concealed status LED provides feed-
back for certain functions:
1x  ash: Single press of pushbutton with
successful teach-in to the remote device;
or after successful communication with the
remote device
3x  ash: Single press of pushbutton with failed
teach-in to the remote device; or after failed
communication with the remote device.
Pushbutton opening
Concealed LED
Micro-USB
Pin
Special functions
Event Consequence
Interrupted wireless
connection to the FUTH:
The actuator adjusts to
the last setpoint tempe-
rature transmitted.
Low power: Radiator valve at 50%
and switch to idle state.
As soon as su cient hot
water ows, the actuator
starts up automatically
and resumes control of
the heating. The actuators
storage device can also
be charged via the micro
-
USB.
Limescale protection: To prevent limescale
formation, the actuator
opens and closes the
radiator valve at regular
intervals.
Frost protection:
At very low temperatures
the actuator automati-
cally adjusts the tem-
perature to a value
above freezing point.
Reset: To trigger a reset, de-
press the pushbutton.
After approx. 6 seconds,
the red LED starts to
light up. When the LED
goes out, a reset is trig-
gered and you can re-
lease the pushbutton.
Removal
If the actuator needs to be removed from
the radiator, press the pushbutton once for
3 to 6 seconds. The actuator changes to
installation position. You then have a time
frame of 10 minutes to remove the actuator.
If the actuator was taught in to a FUTH, the
actuator reverts from installation position
back to normal mode.
Technical data
Wireless controller EnOcean protocol:
EEP A5-20-01
Actuating force max. 100 N
Ambient temperature 0-40°C
Media temperature max. 100°C
Size (WxHxD) 62x63x60 mm
Actuating time approx. 4 s/mm
Max. valve stroke 3.8 mm
Connection M 30x1,5
Frequency 868.3 MHz
Transmit power max. 10 mW
Hereby, Eltako GmbH declares that the radio
equipment type FKS-SV is in com pliance
with Directive 2014/53/EU.
The full text of the EU declaration of con-
formity can be accessed via the QR code or
the internet address under 'Documents'.
Must be kept for later use!
Eltako GmbH
D-70736 Fellbach
Technical Support English:
+49 711 943 500 25
technical-support@eltako.de
eltako.com
11/2023 Subject to change without notice.
Manuals and documents in further
languages
:
http://eltako.com/redirect/FKS-SV
1. App 2. 3.
www.

Chat with your Eltako FKS-SV manual using AI

Get instant AI answers from your Eltako FKS-SV manual

Ask anything about the Eltako FKS-SV. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend FKS-SV?

Yes No

Frequently Asked Questions

A

The actuator uses thermic energy harvesting generated by the temperature difference between the radiator and the room. It requires a delta T greater than 4 Kelvin to function normally. A micro-USB port is available for charging if heat generation is insufficient.

Is this answer helpful?

A

The actuator fits directly onto valves with an M30 x 1.5 thread. Metal adapters are available for valves with different mounting options if they are not compatible with the standard thread size.

Is this answer helpful?

A

No, the actuator requires an additional room temperature sensor or controller. Compatible devices include a Professional Smart Home Controller or a FUTH unit to manage heating schedules effectively.

Is this answer helpful?

A

If the wireless connection is interrupted, the actuator maintains the last known setpoint temperature. This ensures the heating continues to run based on the previous command until the link is restored.

Is this answer helpful?

A

Yes, the unit features automatic frost protection. At very low temperatures, it adjusts the valve position to keep temperatures above freezing to prevent pipe damage.

Is this answer helpful?

A

To reset, press and hold the pushbutton for approximately six seconds until the red LED lights up. Release the button when the LED goes out to complete the reset process.

Is this answer helpful?

A

In normal mode, the actuator communicates with the remote controller wirelessly every ten minutes. You can also press the button once to manually query the current setpoint immediately.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Utilizes thermic energy harvesting eliminating battery changes.
  • Easy direct fit for M30 x 1.5 radiator valves.
  • Bidirectional EnOcean protocol ensures reliable communication.
  • Built-in frost and limescale protection enhances longevity.
  • Micro-USB port allows recharging in low heat environments.
VS

Disadvantages

  • Requires sufficient temperature difference above 4K for power.
  • Needs external controller or sensor for operation.
  • Limited to M30 thread without aftermarket adapters.
  • Operating temperature restricted to 0-40C ambient.
  • Charging via USB may be needed for seldom heated rooms.
M: QW-35-FL

Product Specification

Type

Actuator, Control Unit

Standard

EnOcean

Function

Motor, Heating Control

Dimensions

2.44 x 2.48 x 2.36 in

Features

IP20, USB Micro-B

M: QW-35-FL

Product Description

Eltako FKS-SV Smart Valve Wireless Small Actuator Overview

The Eltako FKS-SV Smart Valve Wireless Small Actuator represents a revolutionary shift in residential heating automation technology. This device eliminates the nuisance of traditional batteries by utilizing thermic energy harvesting. It powers itself using the temperature difference between the radiator surface and the room air. The system activates when this delta T exceeds four Kelvin, ensuring stable operation under normal heating conditions. This eco-friendly approach guarantees long-term continuous operation without maintenance tasks associated with frequent battery replacements. By removing battery dependency, users significantly reduce environmental waste while avoiding periodic labor costs and reducing environmental waste impact globally.

Seamless Integration and Setup

Installing this actuator is designed to be straightforward for most DIY enthusiasts. It fits directly onto existing radiator valves with an M30 x 1.5 thread specification. For older valve types with different mounting options, specialized metal adapters can be sourced locally to ensure compatibility. The system operates via the EnOcean wireless protocol, offering highly reliable bidirectional communication capabilities for high efficiency. You will require an additional room temperature sensor or dedicated controller, such as a Professional Smart Home Controller or a FUTH unit, to manage settings effectively. This ensures precise control over heating schedules according to occupancy patterns.

Advanced Features and Safety Mechanisms

Inside the compact housing, an internal storage device prevents power supply bottlenecks during high mechanical demand. If the environment is rarely heated, you can recharge the internal reservoir via a standard micro-USB port. The actuator includes robust safety mechanisms for various conditions. In case of wireless interruption, it retains the last known setpoint temperature to maintain comfort. Frost protection automatically adjusts temperatures above freezing during unexpected cold snaps. Additionally, limescale protection prevents mineral buildup by cycling the valve open and closed at regular intervals for optimal performance.

Visual Feedback and Control Specifications

Status updates are provided through a concealed LED indicator light located within the unit. Specific flash patterns indicate successful teach-ins or communication failures when pressing the pushbutton interface. Normal operational mode updates occur automatically every ten minutes. Users can manually trigger immediate status checks by briefly pressing the button once. Removing the unit safely requires placing it into installation mode first. This versatile actuator combines sustainability with practical smart home functionality suitable for modern systems and buildings. Whether deployed in private homes or industrial premises, reliability remains a core design principle.

Important Notes

Ensure the temperature difference is sufficient for power generation. Check thread compatibility before purchasing adapters. Keep the pin retracted until installation to prevent damage.

M: QW-35-FL

© Copyright 2026 Manual.ly