Manual.ly Logo

Eltako DSZ15D-3x80A Manual

4.7 · 3 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
6cee9b281eb2188179c958e402edef906eac page 1
Maximum current 3x80A. Standby loss 0.5 watt per path only.
Modulair device for DIN-EN 60715 TH35 rail mounting in distribution
cabinets with IP51 protection class.
4 modules = 70mm wide and 58mm deep.
Accuracy class B (1%). With S0 interface as standard.
It measures active energy by means of the current between input and output.
The internal power consumption of 0.5 watt active power per path is neither
metered nor indicated.
1, 2 or 3 phase conductors with max. currents up to 80A can be connected.
The inrush current is 40mA.
The N terminal must always be connected.
The 7 segment LC display is also legible twice within a period of 2 weeks
without power supply.
Power consumption is shown by a bar flashing at a rate of 100 times per kWh.
Designed as standard for using as double-tariff meter: Switch over to a
second tariff by applying 230V to terminals E1/E2.
On the right next to the display are the keys MODE and SELECT. Press them
to scroll through the menu. First the background lighting switches on. The
display then shows the total active energy per tariff, the active energy of the
resettable memory RS1 or RS2 as well as the instantaneous values of
consumption, voltage and current per phase.
Error message (false)
When the phase conductor is missing or the current direction is wrong 'false'
and the corresponding phase conductor are indicated on the display.
Typical connection:
4-wire-connection 3x230/400V
S0 output
Three-phase energy meter DSZ15D-3x80A
with display and MID approval
Only skilled electricians may install this electrical equipment
otherwise there is the risk of fire or electric shock!
Temperature at mounting location: -25°C up to +55°C.
Storage temperature: -25°C up to +70°C.
Relative humidity: annual average value <75%.
28 380 015 - 1
GB
Menu guidance
ygygy
resettable memory RS1 or RS2 as well as the instantaneous values of
consumption, voltage and current per phase.
Error message (false)
When the phase conductor is missing or the current direction is wrong 'false'
and the corresponding phase conductor are indicated on the display.
Typical connection:
4-wire-connection 3x230/400V
S0 output

Chat with your Eltako DSZ15D-3x80A manual using AI

Get instant AI answers from your Eltako DSZ15D-3x80A manual

Ask anything about the Eltako DSZ15D-3x80A. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend DSZ15D-3x80A?

Yes No
0
User Pic

Anna Knight

5 months ago

Are the connection covers fragile during assembly?

0
User Pic

Manual.ly

5 months ago

Yes, the connection covers are quite delicate. We recommend removing them before installation and reattaching them only at the very end to prevent damage.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Chris Mason

5 months ago

How is the overall value for money on this product?

M: QW-35-FL
0
User Pic

VeritatisEos90

5 months ago

Are the connection covers delicate and should they be removed during assembly?

0
User Pic

Manual.ly

5 months ago

Yes, the connection covers are quite delicate. We recommend removing them during the assembly process and reattaching them only at the very end to prevent damage.

M: QW-35-FL
M: QW-35-FL
0
User Pic

molestiae62

6 months ago

Is this product easy to install quickly?

M: QW-35-FL

Frequently Asked Questions

A

The Eltako DSZ15D-3x80A supports a maximum current of 80 amperes per phase across three phases, suitable for heavy-duty industrial loads.

Is this answer helpful?

A

You can switch between two tariffs by applying 230 volts to the E1 and E2 terminals, enabling separate billing for different time periods.

Is this answer helpful?

A

Yes, the seven-segment LC display remains legible for up to two weeks without a power supply, ensuring critical data is never lost immediately.

Is this answer helpful?

A

No, only skilled electricians should install this equipment to avoid risks of fire or electric shock due to complex wiring requirements.

Is this answer helpful?

A

This meter belongs to accuracy class B, providing a measurement tolerance of ±1% which is suitable for most commercial billing applications.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High accuracy class B with ±1% tolerance for precise billing
  • Compact 4-module design fits standard DIN-EN 60715 TH35 rails
  • Dual tariff capability allows flexible energy cost management
  • Display retains readability for two weeks without power
  • Low standby loss of 0.5 watt per path reduces energy waste
VS

Disadvantages

  • Requires skilled electrician for safe installation procedures
  • N terminal must always be connected or errors may occur
  • Limited to indoor use only due to environmental constraints
  • Maximum conductor cross-section limits cable size options
  • Inrush current of 40mA may affect sensitive upstream devices
M: QW-35-FL

Product Specification

Type

Sensor

Standard

open cable

Function

current measurement function

Topology

Bus

Features

S0 interface, IP51, display

M: QW-35-FL

Product Description

Eltako DSZ15D-3x80A MID Three-phase Meter: Precision Energy Monitoring

The Eltako DSZ15D-3x80A is a robust, three-phase energy meter designed for professional installation in modern distribution cabinets. This modular device adheres to DIN-EN 60715 standards, fitting perfectly on TH35 rails with a compact width of 70mm and depth of 58mm. It supports up to 80 amperes per phase, making it ideal for high-load industrial and commercial applications requiring accurate energy tracking.

Equipped with an internal power consumption of just 0.5 watts per path, this unit ensures minimal standby loss while maintaining high efficiency. The device features a clear seven-segment LC display that remains legible for two weeks even without a power supply, ensuring data visibility during outages. Users can easily navigate menus using the MODE and SELECT keys located next to the screen to view total active energy, resettable memory values, and instantaneous voltage or current readings.

Versatility is a key strength of the DSZ15D-3x80A. It functions as a standard double-tariff meter by simply applying 230V to specific terminals, allowing for flexible billing structures. The meter includes an S0 pulse interface for seamless integration with external reading systems and provides error messages such as false indications when phase conductors are missing or current direction is incorrect. With an accuracy class B rating, it delivers reliable measurements within a ±1% margin.

Installation requires skilled electricians due to safety risks involving fire or electric shock. The unit operates reliably in temperatures ranging from -25°C to +55°C and offers IP51 protection when mounted in appropriate cabinets. Its design accommodates one, two, or three-phase conductors with maximum currents up to 80A, ensuring broad compatibility with various electrical infrastructure needs.

Important Notes

  • Always connect the N terminal to ensure proper operation.
  • Do not exceed recommended torque values to prevent damage.
  • Use only indoor environments as specified by manufacturer guidelines.
M: QW-35-FL

© Copyright 2026 Manual.ly