Manual.ly Logo

Eltako DL-4CH-R16A-DC12+ Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: QW-35-FL
page

/ 1

Loading...
aa4986e47c7e0f3cd9d3a455a8cfcc81910d page 1
4 channels DALI LED dimmer for DIN-EN
60715 TH35 rail mounting. 98x17,5x56 mm.
Protection class IP20.
Only 0.12 watt standby loss.
Designed to control constant voltage LED
modules (CV) at operating voltages of 12 V to
48 V.
Operating mode DT6: separate control of
channels via 4 DALI addresses.
Operating mode Colour&Dim:
activated by 2 DALI addresses, one to adjust
brightness and one to set the colour.
SwitchDim2:
operation via 2 pushbutton inputs permits
control of brightness and colour without
DALI.
Dimming range 0.1%-100%.
Switchable PWM frequency (122 Hz/
244 Hz/488 Hz/976 Hz).
Power supply from 12 V to 48 V DC (depending
on operating voltage of LED modules).
Connected current 16 A-
The maximum connected current can be
distributed to any channel.
High eciency.
Conguration via DALI Cockpit PC software
and DALI USB interface.
Operating modes:
The device has several operating modes:
DT6 (as-delivered state): In this operating
mode each channel is controlled by a
separate DALI address (Device Type 6).
4 channels DALI LED dimmer 16 A
DL-4CH-R16A-DC12+
GB
Temperature at mounting location:
-20°C up to +50°C.
Storage temperature: -25°C up to +70°C.
Relative humidity:
annual average value <75%.
33 000 021 - 1
Only skilled electricians may install this
electrical equipment otherwise there is
the risk of re or electric shock!
Alternatively, operation can also take place
by two pushbutton inputs (SwitchDim2):
SwD1:
brightness.
Press pushbutton briey: On/Off.
Press pushbutton long: Dim.
SwD2:
Scene switch (press pushbutton briey).
Colour&Dim:
This operating mode is used to control RGB
luminaries. Control is by means of 2 DALI
addresses; one address affects brightness
and the other affects channel distribution
(e.g.: colour).
Colour&Dim mode is used to adjust colour
temperature without affecting brightness
and vice versa. Adjustment is by means of
DALI standard commands such as Dim Up/
Down. This permits all customary controls
and gateways (e.g. KNX). This control option
is an alternative to DT8-RGBWAF mode.
Operable via DALI or SwitchDim2:
DALI address 1, SwD1: brightness.
DALI address 2, SwD2: Colour.
Technical data
Max. connected current 16 A
Screw terminals:
Max. connection
cross-section 2.5 mm
2
Must be kept for later use!
Eltako GmbH
D-70736 Fellbach
Technical Support English:
+49 711 94350025
technical-support@eltako.de
eltako.com
19/2021 Subject to change without notice.
The crossed-out waste container indicates
that batteries may not be disposed with
other household or commercial waste.

Chat with your Eltako DL-4CH-R16A-DC12+ manual using AI

Get instant AI answers from your Eltako DL-4CH-R16A-DC12+ manual

Ask anything about the Eltako DL-4CH-R16A-DC12+. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend DL-4CH-R16A-DC12+?

Yes No

Frequently Asked Questions

A

The device supports a maximum connected current of 16 Amperes. This total current can be distributed flexibly across any of the available channels to suit different load requirements safely.

Is this answer helpful?

A

It operates on a direct current voltage range of 12 Volts to 48 Volts. This compatibility covers most constant voltage LED modules used in commercial and residential applications.

Is this answer helpful?

A

There are four independent control channels built into the actuator. Each channel can be managed individually or combined depending on the selected operating mode.

Is this answer helpful?

A

Yes, it features SwitchDim2 functionality allowing operation via pushbutton inputs. This provides basic brightness and scene control without requiring a full DALI network connection.

Is this answer helpful?

A

Only skilled electricians should perform the installation process. Unskilled handling creates potential risks of fire or electric shock injury during wiring.

Is this answer helpful?

A

The standby power consumption is extremely low at 0.12 Watt. This minimal draw contributes to overall system efficiency when the device is idle.

Is this answer helpful?

A

No, the protection class is IP20, which suits indoor dry locations. Outdoor use requires higher protection against moisture and dust environments.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Very low standby loss of 0.12 Watt ensures energy savings.
  • Supports multiple operating modes including DT6 and Colour&Dim.
  • Handles high connected current up to 16 Amps total.
  • Offers SwitchDim2 operation for non-DALI pushbutton control.
  • Configurable via DALI Cockpit software for easy setup.
VS

Disadvantages

  • Installation restricted to skilled electricians due to risks.
  • Protection class IP20 limits use to indoor dry areas only.
  • Operating temperature range limited between -20C and 50C.
  • Requires specific PWM frequency configuration for best performance.
  • Dimensions may constrain fitting in very small enclosures.
M: QW-35-FL

Product Specification

Type

Actuator

Function

Switching actuator (on/off), Dimming function

Topology

Bus

Dimensions

0.69x3.86x2.20in

Features

IP20

M: QW-35-FL

Product Description

Elevating Lighting Control with Smart Efficiency

Modern electrical installations demand precision and flexibility to meet contemporary energy standards. The Eltako DL-4CH-R16A-DC12+ DALI LED dimmer 4-channel, 16A, dimming actuator represents a significant step forward in intelligent lighting management systems. Designed specifically for DIN-EN 60715 TH35 rail mounting, this sophisticated device fits seamlessly into existing distribution boards while offering advanced control capabilities that rival larger industrial solutions. With compact physical dimensions measuring exactly 98x17,5x56 mm, it maximizes valuable cabinet space without compromising overall electrical performance or signal integrity.

Versatile Operating Modes for Diverse Needs

This actuator supports multiple operating modes to suit various complex project requirements efficiently. In the standard DT6 mode, users gain completely separate control of each individual channel via four distinct DALI addresses simultaneously. Alternatively, the Colour&Dim mode utilizes two DALI addresses to adjust brightness and colour temperature independently, proving ideal for dynamic RGB luminaries in hospitality settings. For scenarios where full DALI integration is temporarily unavailable or unnecessary, SwitchDim2 functionality allows basic operation via two dedicated pushbutton inputs for immediate brightness adjustment and scene selection without waiting for digital signals.

Technical Performance and Efficiency Highlights

Energy efficiency is paramount in modern sustainable building designs. This unit boasts an incredibly low standby loss of only 0.12 watt per hour. Power consumption is minimized further through a highly flexible switchable PWM frequency feature, offering selectable options like 122 Hz, 244 Hz, 488 Hz, or 976 Hz depending on load characteristics. The connected current capacity reaches a robust 16 A total, which can be flexibly distributed across any of the four available channels as needed. It operates reliably on constant voltage LED modules ranging from 12 V to 48 V DC globally. Configuration is streamlined through the dedicated DALI Cockpit PC software paired with a USB interface for rapid on-site setup and debugging sessions.

Safety, Environment, and Reliability Standards

Strict safety protocols apply during all installation phases to ensure longevity. Only skilled electricians should handle this high-voltage equipment to avoid serious risks of fire or electric shock injury. The protection class is rated IP20, indicating suitability strictly for indoor dry locations away from moisture. Environmental conditions matter significantly for long-term operation, with specified operating temperatures spanning from minus 20 degrees Celsius to plus 50 degrees Celsius locally. Storage temperatures can extend to plus 70 degrees Celsius temporarily. Relative humidity must remain below seventy-five percent annually to prevent internal corrosion. High quality components ensure reliability within these strict parameters, making it a staple choice for professional commercial and residential projects seeking reliable DALI automation solutions.

M: QW-35-FL

© Copyright 2026 Manual.ly