Eltako AIR IR Manual
PDF manual · 1 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Eltako AIR IR manual using AI
Get instant AI answers from your Eltako AIR IR manual
Ask anything about the Eltako AIR IR. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend AIR IR?
Yes NoFrequently Asked Questions
It transfers readings from an electronic electricity meter's infrared interface to an Eltako FSDG14 data gateway. The sensor acts as the optical communication link between the meter and the gateway's serial input.
Is this answer helpful?
The sensor is intended for electronic meters with an IEC 62056-21 infrared interface. Its AIR interface also follows IEC 1107 and EN 61107 infrared RS232 specifications.
Is this answer helpful?
The supplied 0.75 m cable has open, tinned ends for the FSDG14 terminals. Brown/white is +12 V, white/white is ground, and green/white is Rx.
Is this answer helpful?
No. It receives its 12 V DC supply from the FSDG14 data gateway. Its specified current consumption is 10 mA.
Is this answer helpful?
The green LED indicates that the unit is functioning, while the yellow LED indicates data transmission activity. They help confirm power and communication during installation or checks.
Is this answer helpful?
Installation is specified from 0 C to +50 C. Storage is specified from -25 C to +70 C, and the annual average relative humidity should remain below 75 percent.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Magnetic infrared head supports quick alignment with compatible electronic meter interfaces.
- Compatible with IEC 62056-21, IEC 1107, and EN 61107 infrared communication standards.
- Powered by the FSDG14 gateway and draws only 10 mA at 12 V DC.
- Green status and yellow data LEDs provide immediate operating feedback.
- Compact IP50 housing and 0.75 m prewired cable suit indoor meter cabinet installations.
Disadvantages
- Designed specifically for connection to the FSDG14 data gateway.
- Requires an electronic meter with a compatible infrared optical interface.
- IP50 protection is best suited to dry indoor locations, not exposed outdoor environments.
- The stated installation temperature range begins at 0 C.
- Cable length is fixed at 0.75 m and may limit placement options.
Product Specification
Type
Accessories
Product Description
Eltako AIR IR Sensor for Electricity Meter Gateway - Read, Download & Print Free
The Eltako AIR IR Sensor for Electricity Meter Gateway is a compact magnetic infrared optical head designed to collect meter data from compatible electronic electricity meters. Built for use with the FSDG14 data gateway, it creates a dependable connection between a meter's optical interface and the gateway's serial input. This makes it a practical component for energy monitoring installations where clear, consistent meter communication is important.
Designed for IEC-Compatible Meter Reading
The sensor works with electronic meters that use an IEC 62056-21 infrared interface. Its AIR data interface follows IEC 1107 and EN 61107 specifications, supporting infrared RS232 communication for straightforward data transfer. The magnetic head attaches securely to the meter's optical port, helping installers position the sensor accurately without complicated mounting hardware.
A 0.75 m cable is supplied with the optical head and ends in open, tinned wires for connection to the FSDG14 terminals. This arrangement supports tidy installation in electrical distribution environments. The cable identification is clear: brown/white is +12 V, white/white is ground, and green/white is the receive line.
Reliable Connection for Energy Data Systems
Powered directly by the FSDG14 gateway, the Eltako AIR IR Sensor operates on 12 V DC with a tolerance of +/-10 percent. Its low current draw of 10 mA helps keep the installation efficient. Communication runs at 9600 baud, while the 940 nm infrared wavelength is suited to the expected optical meter interface.
Two LEDs give useful visual feedback during operation. A green LED indicates functional status, and a yellow LED signals data transfer activity. These indicators can simplify commissioning and help users quickly confirm whether the sensor is powered and receiving information from the meter.
Compact Construction and Practical Environmental Limits
With a 32 mm diameter, 29 mm height, and 34 mm body length excluding cable, this sensor is small enough for constrained meter cabinet installations. Its IP50 protection rating is intended for indoor electrical environments where protection from large dust deposits and accidental contact is useful.
The specified installation temperature range is 0 C to +50 C, with storage supported from -25 C to +70 C. Relative humidity should remain below a yearly average of 75 percent. These limits make the sensor appropriate for typical dry utility, control, and distribution areas.
Notes
- Use with an FSDG14 data gateway and a meter featuring a compatible infrared interface.
- Verify device production week 31/20 or later when checking compatibility requirements.
- Keep the optical contact area clean to support stable infrared communication.
Eltako AIR IR Sensor for Electricity Meter Gateway - Read, Download & Print Free provides a concise reference point for planning a compatible meter-reading setup.
Search for 67,706 Manuals online
Type-in Brand or Model