Manual.ly Logo

EK Water Blocks EK-Vector Strix RTX 2080 Ti Backplate Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-54-NAN
page

/ 2

Loading...
2e5e6e03540c8268bea88977d743d3f80f42 page 1
All disclosures, notices and warranty conditions are being written on the back of the box.
Installation and mounting manual for EK-Vector Strix RTX 2080 Ti
Backplate
This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment. EK Water Blocks assumes no liability
whatsoever, expressed or implied, for the use of these products, nor their installation. The following instructions are subject to change without notice. Please visit our web site at www.ekwb.com for updates. Before
installation of this product please read important notice, disclosure and warranty conditions printed on the back of the box.
STEP 1: GENERAL INFORMATION. Sample picture of ROG Strix GeForce RTX 2080 Ti graphics card.
STEP 2: PREPARING YOUR GRAPHICS CARD
EK-Vector Strix RTX 2080 Ti Backplate is very easy to install. First install EK-Vector Strix RTX 2080 Ti series water block according to its installation manual. If
you have it already installed, please check the picture below to see which mounting screws are to be left in their position and which should be removed.
Please remove the six (6) M2.5x4 AX1 screws and their PVC washers as well (marked with arrow).
STEP 3: APPLYING THE THERMAL PADS
EK-Vector Strix RTX 2080 Ti Backplate features passive cooling of the printed circuit board and its components therefore it is mandatory to install the
enclosed thermal pad. Please install enclosed 1,5mm and 1mm thick thermal pads (Thermal Pad G – 1,5mm (120x24) & Thermal pad F – 1mm
(120x16)) as shown on the picture below. You may need to trim the excess thermal pad.
Thermal PAD G – 1,5mm (120x24mm)
EK-Vector Strix RTX 2080 Ti Backplate

Chat with your EK Water Blocks EK-Vector Strix RTX 2080 Ti Backplate manual using AI

Get instant AI answers from your EK Water Blocks EK-Vector Strix RTX 2080 Ti Backplate manual

Ask anything about the EK Water Blocks EK-Vector Strix RTX 2080 Ti Backplate. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend EK-Vector Strix RTX 2080 Ti Backplate?

Yes No

Frequently Asked Questions

A

It is designed specifically for the ASUS ROG Strix GeForce RTX 2080 Ti platform, especially when used with the matching EK Vector Strix water block. The fit and screw pattern are made for that exact setup.

Is this answer helpful?

A

Yes. The backplate is intended to be used with EK-Vector Strix RTX 2080 Ti series water blocks. EK does not officially support pairing it with other coolers or third-party heatsinks.

Is this answer helpful?

A

Yes, thermal pads are included. They are important because the backplate is designed to provide passive cooling for the PCB and nearby components. Proper pad placement helps ensure heat transfer.

Is this answer helpful?

A

You mainly need a Philips head screwdriver and scissors. The screws included with the kit are used to mount the backplate after the thermal pads are positioned correctly.

Is this answer helpful?

A

No. It is better to place all screws first and then tighten them evenly. This helps the backplate sit properly and reduces the chance of uneven pressure during installation.

Is this answer helpful?

A

Yes, a leak test is strongly recommended before powering the computer. EK advises waiting about 24 hours to check the cooling loop for leaks and confirm everything is sealed properly.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Tailored fit for EK-Vector Strix RTX 2080 Ti water blocks.
  • Included thermal pads support passive cooling on the PCB side.
  • Milled standoffs help reduce the chance of over-tightening.
  • Improves the look and structure of a custom GPU build.
  • Clear installation steps make the process easier to follow.
VS

Disadvantages

  • Not officially supported with third-party coolers or heatsinks.
  • Installation requires care and some technical experience.
  • Thermal pads may need trimming for a clean fit.
  • A leak test adds extra time before the system can be used.
  • Compatibility is limited to a very specific GPU setup.
M: OA-GPT-54-NAN

Product Specification

Type

Backplate

Material

Aluminum

Compatibility

NVIDIA GeForce RTX 2080 Ti ASUS ROG Strix

M: OA-GPT-54-NAN

Product Description

EK Water Blocks Quantum Line EK-Quantum Vector Strix RTX 2080 Ti Backplate

The EK Water Blocks Quantum Line EK-Quantum Vector Strix RTX 2080 Ti Backplate is a focused upgrade for builders who want a cleaner finish, stronger rear support, and a better-coordinated cooling setup for the ASUS ROG Strix RTX 2080 Ti. Designed to pair with the matching EK water block, it adds a solid backplate that enhances the card’s overall look while also contributing to passive heat spreading on the PCB side.

A key detail in the EK Water Blocks Quantum Line EK-Quantum Vector Strix RTX 2080 Ti Backplate Manual is the attention to thermal contact. The included thermal pads are part of the cooling design, not just an accessory. With two pad thicknesses supplied, the backplate can make proper contact with targeted areas on the graphics card, helping move heat away from sensitive components more effectively.

Installation is aimed at experienced users, but the process is well structured. You first prepare the card, remove the specified mounting screws, place the thermal pads in the correct positions, and then attach the backplate using the provided screws. The mounting design is practical, and the built-in standoffs help reduce the risk of over-tightening. Even so, a careful and patient approach is always the best choice when working on a premium GPU.

What makes this accessory appealing is how specific it is. Instead of being a universal add-on, it is built for one ecosystem and one purpose: to complete the EK Vector Strix RTX 2080 Ti setup. That specialization can be a benefit for enthusiasts who want reliable fitment, predictable results, and a more refined custom loop build. It also means less guesswork during assembly, as each step is clearly tied to the intended hardware.

The result is a product that blends function and presentation. It helps support the card, improves the visual profile of the build, and adds passive cooling support where it matters. For users already invested in EK’s Strix RTX 2080 Ti platform, it feels like a natural finishing touch rather than an optional extra.

Notes

  • Best used only with the matching EK-Vector Strix RTX 2080 Ti water block.
  • Thermal pads should be placed exactly as directed for proper contact.
  • A 24-hour leak test is strongly recommended before powering on the system.
  • Use only the intended screws and basic hand tools during installation.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly