Manual.ly Logo

EK Water Blocks EK-Quantum Vector FTW3 RTX 2080 Ti Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-54-NAN
page

/ 2

Loading...
280d4f630466fadd882d1778b3f51888b66b page 1
All disclosures, notices and warranty conditions are being written on the back of the box.
Installation and mounting manual for EK-Vector FTW3 RTX 2080 Ti
Backplate:
This product is intended for installation only by expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your equipment. EK Water
Blocks assumes no liability whatsoever, expressed or implied, for the use of these products, nor their installation. The following instructions are subject to change without notice. Please visit our
web site at www.ekwb.com for updates. Before installation of this product please read important notice, disclosure and warranty conditions printed on the back of the box.
STEP 1: GENERAL INFORMATION. Sample picture of FTW3 RTX 2080 Ti graphics card.
STEP 2: PREPARING YOUR GRAPHICS CARD
First install EK-Vector FTW3 RTX 2080 Ti series water block according to its installation manual. If you have it already installed, please
check the picture below to see which mounting screws are to be left in their position and which are to be removed. Please remove the six (6)
M2.5x4 AX1 screws and their PVC washers as well (marked with arrow).
STEP 3: APPLYING THE THERMAL PADS
EK-Vector FTW3 RTX 2080 Ti features passive cooling of the printed circuit board and its components therefore it is mandatory to install the
enclosed thermal pad. Please install (Thermal Pad F – 1,0mm (120x16)) and (Thermal Pad F – 1.5mm (120x16)) as shown on the picture below.
You may need to trim the excess thermal pad.
PLEASE REMOVE THE PROTECTIVE FOIL FROM BOTH SIDES OF THE THERMAL PADS PRIOR TO INSTALLATION!
1. Thermal Pad F 1.0mm (EAN: 3830046996732)
2. Thermal Pad F 1.5mm (EAN: 3830046996749)
1
2
2
2
2
EK-VECTOR FTW3 RTX
2080Ti BACKPLATE

Chat with your EK Water Blocks EK-Quantum Vector FTW3 RTX 2080 Ti manual using AI

Get instant AI answers from your EK Water Blocks EK-Quantum Vector FTW3 RTX 2080 Ti manual

Ask anything about the EK Water Blocks EK-Quantum Vector FTW3 RTX 2080 Ti. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend EK-Quantum Vector FTW3 RTX 2080 Ti?

Yes No

Frequently Asked Questions

A

It is designed for the EK-Vector FTW3 RTX 2080 Ti cooling setup, adding rear-side support, passive cooling, and a cleaner finish to the graphics card assembly.

Is this answer helpful?

A

It does both. The backplate supports passive cooling for the PCB and components when the included thermal pads are installed correctly, while also improving the overall look of the build.

Is this answer helpful?

A

No. It is intended only for EK-Vector FTW3 RTX 2080 Ti series water blocks, and third-party coolers or heatsinks are not officially supported.

Is this answer helpful?

A

A Phillips head screwdriver and scissors are the main tools. The screwdriver is used for the mounting screws, and scissors may help trim the thermal pads if needed.

Is this answer helpful?

A

A leak test helps confirm that the cooling loop is sealed before the PC is powered on. EK recommends waiting 24 hours to reduce the risk of hardware damage.

Is this answer helpful?

A

Misuse, careless handling, improper liquids, aggressive UV additives, or removing the warranty seal can affect coverage and may void parts of the warranty protection.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Purpose-built for EK-Vector FTW3 RTX 2080 Ti setups, ensuring a precise fit and matched look.
  • Adds passive cooling support for the PCB and components through included thermal pads.
  • Uses milled standoffs and six screws, helping simplify final tightening and alignment.
  • Gives the graphics card a cleaner, premium appearance inside a custom water-cooling build.
VS

Disadvantages

  • Works only with EK-Vector FTW3 RTX 2080 Ti water blocks, so compatibility is limited.
  • Installation is detail-heavy and best handled by experienced users or a qualified technician.
  • Thermal pads must be trimmed and applied correctly, which adds extra setup time.
  • A leak test is strongly recommended before use, making the full process longer and more careful.
M: OA-GPT-54-NAN

Product Specification

Type

Backplate

Material

Aluminium

Compatibility

NVIDIA GeForce RTX 2080 Ti, EVGA GeForce RTX 2080 Ti FTW3 Gaming, EVGA GeForce RTX 2080 Ti FTW3 Ultra Gaming, EVGA GeForce RTX 2080 Ti FTW3 Ultra Hybrid Gaming, EVGA GeForce RTX 2080 Ti FTW3 Ultra Hydro Copper Gaming

M: OA-GPT-54-NAN

Product Description

EK Water Blocks Quantum Line EK-Quantum Vector FTW3 RTX 2080 Ti Backplate

The EK Water Blocks Quantum Line EK-Quantum Vector FTW3 RTX 2080 Ti Backplate is a focused upgrade for builders who want both visual refinement and practical support for an RTX 2080 Ti cooling setup. If you are searching for the EK Water Blocks Quantum Line EK-Quantum Vector FTW3 RTX 2080 Ti Backplate Manual, the big idea is straightforward: this accessory is designed to work together with the matching EK-Vector FTW3 water block and help complete the cooling assembly with a cleaner, more secure finish.

Beyond aesthetics, the backplate plays an active role in passive cooling. It helps cover and support the printed circuit board while the included thermal pads improve contact with key components. That means the product is not just a decorative plate; it is part of a carefully planned thermal solution. For hardware enthusiasts, that balance of form and function is often what makes a premium water-cooling build feel complete.

Installation is aimed at experienced users, and the process reflects that level of precision. The original mounting screws must be removed from specific points, thermal pads must be placed correctly, and the protective foil has to be stripped before assembly. The included hardware and clear mounting layout make the process manageable, but attention to detail matters. A Phillips screwdriver and scissors are the main tools you will need.

Compatibility is one of the strongest aspects of this accessory. It is built specifically for EK-Vector FTW3 RTX 2080 Ti series water blocks, so it is not intended as a universal backplate for third-party coolers. That narrow focus is actually a benefit for users who want a guaranteed fit and predictable performance inside a matching EK loop. The milled standoffs also help reduce the risk of over-tightening, which adds confidence during final installation.

What stands out most

The backplate is best understood as a finishing component that supports both cooling and durability. It helps stabilize the graphics card assembly, improves thermal management on the rear side of the PCB, and gives the build a polished look that matches EK’s Quantum styling.

Notes

  • Use only with the matching EK-Vector FTW3 RTX 2080 Ti water block.
  • A 24-hour leak test is strongly recommended before powering the system.
  • Follow the thermal pad layout carefully for proper contact and cooling.
  • Warranty coverage depends on correct installation and approved liquids.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly