Manual.ly Logo

EK Water Blocks EK-Quantum Scalar Dual 4-Slot Parallel Manual

0.0 · 0 Ratings

PDF manual · 6 Pages

English

M: OA-GPT-54-NAN
page

/ 6

Loading...
13a3c0f799a78418b459bcd235adc6800d6c page 3
- 3 -
ATTACHING THE EK-SCALAR TERMINAL
Please take the following steps for installing any EK-Scalar terminal
to your graphics cards water blocks:
1. Remove the cover from your water block terminal, be careful not to
pull on any LED wiring as this may damage soldered joints.
2. Remove the pre-installed Terminal from each water block.
Unfasten the three (3) M4 screws using the supplied 2.5 mm Allen
(hex) key.
3. Install the gaskets (OR 15 x 1mm) in grooved slots on your new EK-
Scalar terminal. Make sure the gaskets are installed correctly! Each
water block or blank link requires two (2) gaskets!
4. Secure the new EK-Scalar Terminal to each water block using the
enclosed M4 x 20 DIN7984 screws with the suppliedd 2.5 mm
Allen (hex) key.
5. Plug all the remaining unused G1/4 threaded ports, if any, using
the 6mm Allen (hex) key and install your tubes fittings for both inlet
and outlet.
EK-Scalar
Terminal
Screw M4 x 20 DIN 7984
OR 15 x 1 mm

Chat with your EK Water Blocks EK-Quantum Scalar Dual 4-Slot Parallel manual using AI

Get instant AI answers from your EK Water Blocks EK-Quantum Scalar Dual 4-Slot Parallel manual

Ask anything about the EK Water Blocks EK-Quantum Scalar Dual 4-Slot Parallel. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend EK-Quantum Scalar Dual 4-Slot Parallel?

Yes No

Frequently Asked Questions

A

It is used to connect EK-Vector GPU water blocks in a custom loop while keeping the routing compact and visually clean. It helps organize coolant flow and supports more advanced loop layouts.

Is this answer helpful?

A

Yes. The text states that EK-Scalar terminals are compatible with EK-Vector GPU blocks, making them a direct fit for supported graphics card water blocks.

Is this answer helpful?

A

The installation is manageable for experienced builders. It involves removing the old terminal, installing the supplied gaskets, mounting the new terminal with screws, and then fitting the inlet and outlet hardware.

Is this answer helpful?

A

Yes. The manual explains that EK-Scalar terminals can be configured in parallel with another block. This is useful for certain builds, but it requires enough flow and similar restriction across blocks.

Is this answer helpful?

A

Make sure the gaskets are seated correctly, all unused G1/4 ports are plugged, and the inlet and outlet are chosen according to the loop layout. Also confirm that the pump can handle the planned flow path.

Is this answer helpful?

A

The text directs users to EK support and service resources. If you need assistance, you can contact EKWB through their support channels for installation or compatibility help.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Clean, compact routing for EK-Vector GPU water blocks.
  • Supports flexible loop layouts, including parallel configurations.
  • Uses standard G1/4 threading for easy fitting compatibility.
  • Includes installation hardware and gaskets for the terminal swap.
VS

Disadvantages

  • Parallel setups may reduce thermal efficiency if flow is unbalanced.
  • Installation requires careful gasket placement and screw tightening.
  • Unused ports must be sealed correctly to avoid leaks.
  • Best results depend on pump capacity and loop restriction planning.
M: OA-GPT-54-NAN

Product Specification

Type

SLI/CF-Bridge

Material

POM

Connectors (male)

N/A

Connectors (female)

2x G1/4"

Color

black (matte)

M: OA-GPT-54-NAN

Product Description

EK-Quantum Scalar Dual 4-Slot Parallel Acetal: Smarter Routing for EK-Vector GPU Loops

The EK-Quantum Scalar Dual 4-Slot Parallel Acetal is made for builders who want a cleaner, more deliberate way to connect EK-Vector graphics card water blocks. Rather than acting as a basic connector, it serves as a compact routing point that helps organize the flow path inside a custom cooling loop. That makes it especially appealing for showcase systems where both performance and presentation matter.

A major strength of the EK-Scalar approach is its practicality. The terminal is designed to work with EK-Vector GPU blocks and can be installed by removing the existing terminal, placing the supplied gaskets, and fastening the new unit with the included screws. The process is straightforward for experienced loop builders, and the acetal finish gives the setup a dark, clean look that fits well in stealth-themed builds.

The manual also emphasizes flexibility in flow configuration. Depending on how the loop is arranged, the terminal can support different inlet and outlet choices, including parallel-style routing. This is useful when pairing blocks in a multi-component system, but it also means the builder needs to think carefully about pump strength and overall loop restriction. A parallel setup can look excellent and help keep the build compact, yet it works best when each block receives enough coolant flow.

Another practical detail is the use of standard G1/4 threaded ports, which makes the terminal easy to integrate with common fittings and tubing. Unused ports should be sealed properly, and gasket placement should be checked with care to avoid leaks. Small details like these are what make the EK-Quantum Scalar line feel refined: it is not just about connecting parts, but about making the whole loop feel intentional.

For readers following the EK Water Blocks Quantum Line EK-Quantum Scalar Dual 4-Slot Parallel Acetal Manual, the main takeaway is simple: this product is built for users who want a premium connection solution with strong visual appeal and real layout flexibility. It is best suited to custom-loop enthusiasts who value neat installation, reliable sealing, and the freedom to design a more advanced GPU cooling path.

Notes

  • Best for custom-loop builders who already know their layout goals.
  • Parallel configurations look elegant, but they need sufficient flow.
  • Careful gasket installation is key to a secure and leak-free fit.
  • EK support is available if installation or compatibility questions arise.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly