EK Water Blocks EK-Quantum Reflection2 Torrent DDC 4.2 PWM D-RGB Manual
PDF manual · 17 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your EK Water Blocks EK-Quantum Reflection2 Torrent DDC 4.2 PWM D-RGB manual using AI
Get instant AI answers from your EK Water Blocks EK-Quantum Reflection2 Torrent DDC 4.2 PWM D-RGB manual
Ask anything about the EK Water Blocks EK-Quantum Reflection2 Torrent DDC 4.2 PWM D-RGB. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend EK-Quantum Reflection2 Torrent DDC 4.2 PWM D-RGB?
Yes NoFrequently Asked Questions
The plate supports up to S360 radiators at the bottom and S240 at the side. An optional S360 can be added on top in 5-slot configurations.
Is this answer helpful?
Plug the 3-pin connector into the motherboard's D-RGB header ensuring the pinout matches +5V, Data, Empty, Ground.
Is this answer helpful?
No, pure distilled water is not recommended. Use quality corrosion-inhibiting coolants like EK-CryoFuel for best results.
Is this answer helpful?
While experienced users can install it, proper training is advised. Improper installation voids liability for damages.
Is this answer helpful?
Perform a continuous leak test for 24 hours after filling the loop to ensure no leaks occur before powering the rest of the system.
Is this answer helpful?
If the 4-pin PWM fan cable is not connected to the motherboard, the pump will run at maximum speed (100% PWM).
Is this answer helpful?
Spare parts can be ordered via customer support using the EAN numbers listed in the technical specifications section.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Integrated D5 PWM pump saves space and simplifies loop building
- High-quality plexi plates provide clear view of coolant flow
- Supports multiple radiator configurations for flexible cooling setups
- Includes comprehensive mounting kit and tools for installation
- D-RGB lighting enhances visual appeal with easy motherboard integration
Disadvantages
- Requires careful handling during installation to avoid damaging the case
- Complex wiring may challenge beginners unfamiliar with custom loops
- Limited compatibility strictly to specific chassis models like O11D Mini
- Mandatory leak testing adds time before system can be fully powered on
- Higher price point compared to standard non-integrated distribution plates
Product Specification
Type
Manifold plate with pump
Connections
G1/4"
Lighting
LED (RGB)
Product Description
EK Water Blocks Quantum Line EK-Quantum Reflection² Review
The EK-Quantum Reflection² PC-O11D Mini D5 PWM D-RGB distribution plate is a premium solution designed specifically for the NZXT H1 and similar compact chassis. This component transforms the internal layout of small form factor builds by providing a centralized hub for liquid cooling loops. It features a sleek design with top and bottom plexi plates that offer excellent visibility of the coolant flow while maintaining a clean aesthetic. The unit integrates a high-performance D5 PWM pump directly into the assembly, ensuring efficient circulation without cluttering the limited space inside the case.
Installation requires precision and care. The product includes all necessary mounting hardware, including M4 screws and an Allen key, to secure the plate firmly to the chassis. Users must remove factory panels to align the mounting holes correctly. Once installed, the distribution plate supports flexible radiator configurations, accommodating up to two radiators in a 7-slot setup or adding a third optional radiator in a 5-slot configuration. This flexibility allows enthusiasts to build powerful cooling systems even in ITX or mATX cases.
The integrated D-RGB lighting system adds a vibrant touch to any build. With 12 LEDs and a 3-pin connector, the strip syncs seamlessly with motherboards supporting standard D-RGB headers. The cable length of 500 mm provides ample reach for routing within tight spaces. For optimal performance and longevity, the use of corrosion-inhibiting coolants like EK-CryoFuel is strongly recommended over pure distilled water. Proper leak testing for 24 hours before full system operation is crucial to prevent damage to components.
Key Features and Notes
This distribution plate is not just a connector but a complete management system for water blocks. It ensures that all G1/4 ports are utilized efficiently, with unused ports sealed using supplied plugs. The pump cover made of Acetal material offers durability and heat resistance. Always ensure the SATA power connector is linked directly to the PSU, while the PWM header connects to the motherboard for speed control.
Pros and Cons
Pros
- Integrated D5 PWM pump saves space and simplifies loop building
- High-quality plexi plates provide clear view of coolant flow
- Supports multiple radiator configurations for flexible cooling setups
- Includes comprehensive mounting kit and tools for installation
- D-RGB lighting enhances visual appeal with easy motherboard integration
Cons
- Requires careful handling during installation to avoid damaging the case
- Complex wiring may challenge beginners unfamiliar with custom loops
- Limited compatibility strictly to specific chassis models like O11D Mini
- Mandatory leak testing adds time before system can be fully powered on
- Higher price point compared to standard non-integrated distribution plates
Frequently Asked Questions
What is the maximum radiator size supported? The plate supports up to S360 radiators at the bottom and S240 at the side. An optional S360 can be added on top in 5-slot configurations.
How do I connect the D-RGB LED strip? Plug the 3-pin connector into the motherboard's D-RGB header ensuring the pinout matches +5V, Data, Empty, Ground.
Can I use distilled water in this loop? No, pure distilled water is not recommended. Use quality corrosion-inhibiting coolants like EK-CryoFuel for best results.
Is professional installation required? While experienced users can install it, proper training is advised. Improper installation voids liability for damages.
How long should I test for leaks? Perform a continuous leak test for 24 hours after filling the loop to ensure no leaks occur before powering the rest of the system.
What happens if the PWM cable is not connected? If the 4-pin PWM fan cable is not connected to the motherboard, the pump will run at maximum speed (100% PWM).
Where can I find spare parts? Spare parts can be ordered via customer support using the EAN numbers listed in the technical specifications section.
Search for 67,706 Manuals online
Type-in Brand or Model