EK Water Blocks EK-Quantum Kinetic TBE VTX PWM D-RGB Manual
PDF manual · 11 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your EK Water Blocks EK-Quantum Kinetic TBE VTX PWM D-RGB manual using AI
Get instant AI answers from your EK Water Blocks EK-Quantum Kinetic TBE VTX PWM D-RGB manual
Ask anything about the EK Water Blocks EK-Quantum Kinetic TBE VTX PWM D-RGB. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend EK-Quantum Kinetic TBE VTX PWM D-RGB?
Yes NoFrequently Asked Questions
Connect the 4-Pin Molex connector directly to your PSU and the 4-Pin PWM connector to the CPU or water pump header on your motherboard.
Is this answer helpful?
No, the pump must never be mounted upside down because it may run dry and lead to mechanical failure of the unit.
Is this answer helpful?
You must run the loop without power to other components for 24 hours to check for leaks and air bubble removal.
Is this answer helpful?
Use the 3-pin D-RGB header on the motherboard ensuring alignment with the plus 5V, Digital, and Ground pins.
Is this answer helpful?
Yes, barbs are allowed but tubes must be securely attached using hose clamps or an appropriate substitute.
Is this answer helpful?
Remove the Anticyclone from the top, attach the internal tube to a G1/4 hole with the gasket, and secure the top.
Is this answer helpful?
EK recommends using EK-Quantum Torque fittings with the VTX series for the best performance and reliability.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- PWM control allows precise speed regulation.
- D-RGB supports dynamic lighting synchronization.
- VTX pump delivers high flow rates reliably.
- Flexible mounting options with bracket support.
- Multiple ports allow custom tubing routing.
Disadvantages
- Upside down mounting causes pump failure.
- Strict pinout required for D-RGB headers.
- 120 version tube setup is complex.
- Drilled holes must follow exact pattern.
- 24 hour leak test required before use.
Product Specification
Type
Expansion tank incl. pump
Connections
G1/4"
Pump
12V, 290.59 GPH, 17.39 ft
Lighting
LED (RGB)
Color
clear (transparent), black (matte)
Features
incl. bracket
Product Description
EK Quantum Kinetic TBE VTX PWM D-RGB Overview
The EK-Quantum Kinetic TBE VTX PWM D-RGB combo unit represents a pinnacle in custom liquid cooling architecture. Designed for enthusiasts demanding both high performance and visual flair, this pump and reservoir combination integrates seamless RGB control with reliable fluid dynamics. The system utilizes the EK-Quantum Kinetic TBE architecture, ensuring optimal water retention and minimal noise during operation. Whether building a water-cooled PC or upgrading an existing loop, this component serves as the heart of your cooling system.
Performance and Power Management
At the core lies the VTX pump, delivering exceptional flow rates through multiple mounting configurations. The included PWM fan connector allows precise speed regulation via the motherboard or a dedicated water pump header. When connected, users can monitor rotational speed and control fan curves effectively. If the PWM cable is absent, the pump defaults to maximum speed, ensuring reliability even in plug-and-play scenarios. Power is supplied via a direct 4-Pin Molex connection, guaranteeing stable voltage regardless of motherboard power delivery capabilities.
Aesthetics and Lighting Integration
Visual customization is handled through the D-RGB header interface. Plugging the 3-pin connector into the motherboard D-RGB header enables dynamic lighting effects. Proper alignment with the pinout 5V, Digital, Empty, Ground is critical for functionality. Misalignment risks hardware damage, so verifying the header layout before connection is a mandatory step. The internal tube installation differs slightly between the 120 and 160 versions, with specific instructions regarding the Anticyclone feature to prevent damage.
Installation and Safety Protocols
Securing the unit requires drilling four 4.2 mm holes in a 50 x 50 mm pattern if mounting directly to the chassis. Alternatively, the EK-UNI Pump Bracket offers flexibility. A crucial safety warning dictates that the pump must never be mounted upside down, as this causes dry running and eventual failure. Fittings must be installed on top ports before inserting internal tubes. The use of internal tubes on the 120 model with the Anticyclone simultaneously is discouraged. Finally, a 24-hour leak test ensures loop integrity before powering on the complete system.
Box Contents and Fitting Requirements
The package includes necessary hardware such as Allen keys, washers, and screws for assembly. EK recommends using torque fittings with the VTX series for best results. If using barbs, secure tubes with hose clamps. All unused ports require blocking with G1/4 plugs. Inlet ports feature G1/4 threading planes. Avoid fittings longer than 5 mm within threads to prevent leakage. Following these guidelines ensures a robust and leak-free installation for long-term system stability and performance.
Search for 67,706 Manuals online
Type-in Brand or Model