EK Water Blocks EK-Nucleus AIO CR360 Lux Direct Die D-RGB 1700 Manual
PDF manual · 51 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your EK Water Blocks EK-Nucleus AIO CR360 Lux Direct Die D-RGB 1700 manual using AI
Get instant AI answers from your EK Water Blocks EK-Nucleus AIO CR360 Lux Direct Die D-RGB 1700 manual
Ask anything about the EK Water Blocks EK-Nucleus AIO CR360 Lux Direct Die D-RGB 1700. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend EK-Nucleus AIO CR360 Lux Direct Die D-RGB 1700?
Yes NoFrequently Asked Questions
It is made for delidded Intel 12th and 13th generation CPUs using the LGA 1700 socket. It is not a broad universal AIO, so compatibility is intentionally limited to this direct-die use case.
Is this answer helpful?
The package includes the radiator, three fans, mounting hardware, Intel backplate, die guard, extension cables, and liquid metal compound. It is a well-equipped set for the intended platform.
Is this answer helpful?
Possibly yes. If your case does not provide enough access to the CPU area from behind the motherboard tray, the board should be removed before installation begins.
Is this answer helpful?
Connect the pump to the motherboard using the 4-pin PWM header. EK recommends keeping it within 20-100% PWM and generally running it at full speed for best results.
Is this answer helpful?
Use the 3-pin D-RGB header with a +5V layout only. Do not connect it to a 12V RGB header, as that can damage the LEDs or other hardware.
Is this answer helpful?
Top mounting is recommended, and vertical mounting with the tubing at the bottom is also acceptable. Avoid layouts that place the tubing at the top or create unfavorable airflow and fill conditions.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Direct-die design can deliver excellent thermal performance on compatible Intel 1700 CPUs.
- 360 mm radiator and three high-speed fans support strong heat dissipation under heavy load.
- Complete mounting kit simplifies installation for a specialized cooling setup.
- D-RGB lighting and a magnetic logo top add visual customization.
Disadvantages
- Only intended for delidded Intel LGA 1700 processors, so compatibility is narrow.
- Installation is complex and may require removing the motherboard.
- Liquid metal use increases the risk of mistakes if handled carelessly.
- Wrong RGB header or poor pump settings can damage components.
Product Specification
Type
internal (closed system)
Heatsink
CPU, Copper
Compatibility
1700
Radiator
14.17in (Radiator Class), 1.06in (Radiator Height), Aluminum
Fan
3x 4.72x4.72x0.98in, 550-2300rpm, 72.00 CFM, 72 CFM, 36dB(A)
Reservoir
N/A
Pump
12V
Fittings
G1/4"
Lighting
LED (RGB), 3-Pin ARGB (+5V/DATA/GND)
Manufacturer's Warranty
5 Years
Product Description
EK Water Blocks EK-Nucleus AIO CR360 Direct Die D-RGB 1700 Manual
The EK-Nucleus AIO CR360 Lux Direct Die D-RGB 1700 is a high-end liquid cooling solution built for Intel LGA 1700 systems that have been delidded for direct-die contact. It is designed for enthusiasts who want maximum thermal transfer, especially on unlocked 12th and 13th generation CPUs. The included installation guidance focuses on careful handling, precise mounting, and the correct use of liquid metal for the best possible cooling performance.
This cooler combines a 360 mm radiator, three 120 mm EK-FPT fans, and a compact pump unit that runs at up to 3100 RPM. The fans are tuned for strong airflow and controlled noise, while the pump is engineered to stay within a safe PWM range. EK also includes the key mounting parts needed for Intel 1700 installation, such as the backplate, die guard, springs, thumb nuts, and extension cables. That makes the package feel complete and purpose-built rather than generic.
What makes this model stand out is its direct-die approach. Instead of cooling through an integrated heat spreader, the block sits over the CPU die itself, which can significantly improve thermal results when installed correctly. The manual places strong emphasis on safety and alignment, from cleaning the die to applying Thermal Grizzly Conductonaut liquid metal in a controlled amount. This is not a casual plug-and-play cooler; it is a precision product for users comfortable with advanced CPU preparation.
The D-RGB lighting support adds another layer of customization, and the magnetic pump top lets you rotate the EK logo into the correct orientation after installation. Cable routing is also thoughtfully covered, with guidance for pump PWM, D-RGB headers, and daisy-chained fan connections. For builders chasing both performance and presentation, the system blends function with a clean visual finish.
Notes
- Best suited for delidded Intel LGA 1700 CPUs only.
- Use the correct +5V D-RGB header to avoid damage.
- Keep the pump within the recommended PWM range at all times.
- Liquid metal handling requires patience and care.
Search for 67,706 Manuals online
Type-in Brand or Model