EK Water Blocks EK-FC GV100 Pro Manual
PDF manual · 10 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your EK Water Blocks EK-FC GV100 Pro manual using AI
Get instant AI answers from your EK Water Blocks EK-FC GV100 Pro manual
Ask anything about the EK Water Blocks EK-FC GV100 Pro. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend EK-FC GV100 Pro?
Yes NoFrequently Asked Questions
It is compatible with Nvidia Quadro GV100 graphics cards. The manual is specifically written for that GPU platform, so you should confirm your exact card model before proceeding.
Is this answer helpful?
Removing the card reduces the chance of accidental stress on the GPU and the PCB during mounting. It also makes alignment, cleaning, and fitting work safer and more controllable, lowering the risk of damage.
Is this answer helpful?
The block uses EK-TIM Ectotherm thermal grease included with the kit. The manual advises a light coat on the GPU chip and suggests applying in a cross form for best performance.
Is this answer helpful?
The thermal pad thickness is 1.0mm (F=1.0mm). You must cut the pads to proper shapes for VRM coverage and remove the protective foil from both sides before placing them on the PCB.
Is this answer helpful?
The manual recommends starting tightening around the GPU core and continuing outward. Use a plastic washer under each screw, align mounting holes correctly, and avoid pressing the block down too forcefully to prevent cracking.
Is this answer helpful?
Check for uniform surface contact. If necessary, temporarily remove the block to inspect VRM-area contact and confirm the block contacts the intended integrated circuits. Then reattach following the mounting steps again.
Is this answer helpful?
You can use other fittings, but the manual warns to pay special attention to the maximum allowed male thread length (5mm) for G1/4 threads. For unused openings, plug them with EK-Plug G1/4 or an equivalent plug to keep the loop sealed.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Compatible with Nvidia Quadro GV100 and designed for liquid-cooling performance upgrades
- Includes EK-TIM Ectotherm thermal grease guidance and cross-application suggestion
- Uses 1.0mm F=1.0mm thermal pads sized and supplied to cover VRM components
- Clear mounting and contact-check steps to help achieve uniform GPU contact
- Supports G1/4 fittings with guidance for inlets, outlets, and capped unused ports
Disadvantages
- Installation is intended only for expert users
- Requires careful cleaning, pad cutting, and precise alignment to avoid poor contact
- Improper mounting or excessive force can risk damage to GPU dies or the PCB
- Non-EK fitting usage adds complexity due to thread-length caution
Product Specification
Type
GPU
Material
Copper (nickel-plated), Stainless steel
Compatibility
NVIDIA Quadro GV100, NVIDIA Tesla Volta V100, NVIDIA GeForce Titan V
Connections
G1/4"
Lighting
LED (RGB)
Special features
Voltage converter co-cooled (GPU)
Product Description
EK Water Blocks EK-FC GV100 Pro (Nickel, Stainless steel) - Manual
The EK Water Blocks EK-FC GV100 Pro is a GPU water block engineered for Nvidia Quadro GV100 graphics cards. Built with a nickel finish and stainless steel components, it delivers an efficient path for liquid cooling, helping you replace air cooling with a controlled thermal solution designed for stable performance in demanding systems.
This block is intended for expert installation only. The manual emphasizes careful handling, since improper mounting can damage the GPU, the graphics card PCB, or the cooling hardware. Before starting, the graphics card should be removed from the computer to make installation safer and to prevent accidental stress on the GPU circuitry.
A key part of getting performance right is surface preparation and correct contact. You begin by removing the stock cooler, then thoroughly cleaning away old thermal compound using non-abrasive cloths or q-tips, with denatured alcohol recommended for TIM residue. Next, apply the included EK-TIM Ectotherm thermal grease to the GPU chip using a light coating, with an optional cross pattern suggested for best results.
The EK-FC GV100 Pro also uses thermal pads to cover VRM-area components such as MOSFETs, IC memory, and coils. The included pad thickness is 1.0mm (F=1.0mm). Make sure to remove protective foil from both sides of the pads before placement, and cut pads to match the required coverage. Extra pad quantity is supplied to complete installation confidently.
For mounting, align the water block standoffs and mounting holes carefully, avoiding excessive downward force because chip dies can crack if pressed too hard. When attaching the block, tighten screws starting near the GPU core and moving outward. Always use the plastic washers under the screws, and use only the correct screw set included with the kit.
Once mounted, install G1/4 threaded fittings, connect tubing to your loop, and cap unused ports with EK-Plug G1/4 (or equivalent). The manual includes a caution about the maximum allowed thread length when using non-EK compression fittings.
Finally, check for uniform contact. If needed, temporarily remove the block to confirm even contact, especially in the VRM area, then reattach after verifying thermal pad thickness and correct placement.
Key results
- Nickel and stainless steel water block designed for Nvidia Quadro GV100 cooling upgrades
- Proper cleaning and EK-TIM Ectotherm application for reliable GPU-to-block thermal contact
- Correct 1.0mm thermal pad cutting, foil removal, and VRM coverage for balanced cooling
- Careful torque order and washer usage to reduce risk of GPU or PCB stress
Notes
- Do not use pure distilled water; EK recommends EK-CryoFuel coolants.
- Instructions can change, so check EKWB website updates before installation.
- If contact looks uneven, re-check pad thickness and placement, or use support resources.
Search for 67,706 Manuals online
Type-in Brand or Model