EK Water Blocks EK-Classic GeForce RTX 3080/3090 Manual
PDF manual · 10 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your EK Water Blocks EK-Classic GeForce RTX 3080/3090 manual using AI
Get instant AI answers from your EK Water Blocks EK-Classic GeForce RTX 3080/3090 manual
Ask anything about the EK Water Blocks EK-Classic GeForce RTX 3080/3090. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend EK-Classic GeForce RTX 3080/3090?
Yes NoFrequently Asked Questions
The backplate is designed for reference-layout GeForce RTX 3080 and 3090 PCBs. Non-reference or custom PCB designs may not align correctly and could require different mounting solutions.
Is this answer helpful?
No specialized tools are required beyond a Phillips head screwdriver and scissors to cut thermal pads. The kit includes the necessary screws, washers, and nuts.
Is this answer helpful?
Cut the provided Thermal PAD G pieces to fit VRM and component contact points indicated for RTX 3080/3090. Remove protective foil from both sides before applying and ensure pads contact both PCB components and the backplate surfaces.
Is this answer helpful?
Installing the backplate following EK instructions does not inherently void the product warranty. However, using improper liquids, removing the leak-test seal, or damaging components through incorrect installation can void warranty coverage.
Is this answer helpful?
EK recommends a 24-hour leak test of the cooling loop before powering the computer and explicitly warns against using city water pressure to test the block to prevent housing rupture and voiding guarantees.
Is this answer helpful?
Yes—the backplate helps spread heat from VRM areas and, when used with the EK-Classic GPU water block and properly placed thermal pads, contributes to improved thermal transfer and overall cooling efficiency.
Is this answer helpful?
For assistance, warranty claims, or replacement thermal pads and screws, contact EK Support via their website (ekwb.com/support) or the contact addresses provided by EK Water Blocks.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Comes with comprehensive mounting kit including screws, washers, nuts, and mounting mechanism.
- Includes generous thermal pad supply (1.0 mm, 1.5 mm, 2.0 mm) sized for VRM coverage.
- Enhances PCB rigidity and passive heat transfer when paired with EK water blocks.
- Tailored compatibility for reference-layout RTX 3080 and RTX 3090 cards.
- D-RGB compatibility for cohesive lighting with EK cooling components.
Disadvantages
- Intended for expert installation; improper fitting can damage GPU or void warranty.
- Requires cutting and precise placement of thermal pads which may be time-consuming.
- Warranty can be voided by improper liquids or removing sealed leak-test label.
- Not universally compatible with non-reference PCB layouts without modification.
- Must perform a 24-hour leak test and follow strict procedures before powering up.
Product Specification
Type
Backplate
Material
Aluminium
Compatibility
NVIDIA GeForce RTX 3080 Reference, NVIDIA GeForce RTX 3090 Reference
Dimensions (LxWxH)
8.34x3.90x0.16in
Product Description
EK Water Blocks Classic Line EK-Classic GPU RTX 3080/3090 D-RGB, Reference GPU, Backplate schwarz Manual
The EK Water Blocks Classic Line EK-Classic GPU backplate for GeForce RTX 3080/3090 is a precision accessory designed to complement EK's water-block cooling solutions. Crafted for reference-layout NVIDIA RTX 3080 and 3090 cards, this black backplate improves structural rigidity, aids passive heat transfer from VRM areas to the cooling system, and delivers a clean, OEM-aligned aesthetic. It pairs directly with EK-Classic GPU water blocks and includes D-RGB compatibility when mounted in builds that support addressable lighting via the associated block components.
Installation is targeted at experienced builders and technicians. EK provides a comprehensive kit—multiple screw sizes, PVC washers, nuts, a mounting mechanism, and an ample supply of Thermal PAD G in 1.0 mm, 1.5 mm, and 2.0 mm thicknesses—so you can tailor pad placement to the specific VRM and component layout of each card. The manual emphasizes removing the GPU from the system for safe handling, following the water-block installation first, cutting thermal pads to fit, removing protective film on both sides of the pads, and aligning/fastening the backplate with the provided M2.5 screws. Guidance covers RTX 3080 and RTX 3090-specific pad thickness placement to ensure good contact with VRM zones.
Safety and best practices are highlighted: perform a 24-hour leak test on the cooling loop before powering the system, never subject the water block to city water pressure, and avoid improper liquids or additives that can void warranties. The manual also stresses even tightening of screws without excessive force, and that improper installation may damage the GPU or void coverage. EK disclaims liability for installation errors and provides warranty and support details.
Overall, the EK-Classic backplate is a practical, well-supplied accessory for water-cooled RTX 3080/3090 builds that improves heat spreading, protects the PCB, and completes the visual and functional integration with EK Classic water blocks.
Notes
- Remove protective foil from both sides of thermal pads before installation.
- Test the loop for leaks for 24 hours prior to powering the PC.
- Warranty voids if exposed to improper liquids or if the leak-test seal is removed.
Search for 67,706 Manuals online
Type-in Brand or Model