Dynaudio 9S Manual
PDF manual · 17 Pages
English
Advantages and Disadvantages
Advantages
- Superior sound quality with deep and controlled bass.
- Flexible connectivity options for various audio systems.
- Advanced controls for fine-tuning audio settings.
Disadvantages
- Relatively high power consumption at maximum levels.
- Requires careful setup to avoid improper connections.
- Limited to specific voltage ranges depending on the region.
Ask a Question
Frequently Asked Question
The Dynaudio 9S offers precise bass reproduction, advanced controls, and robust build quality, making it ideal for mixing and mastering in professional studio environments.
Is this answer helpful?
Connect the first subwoofer as a master using the LFE input, then connect additional subwoofers using the Slave output. Ensure that all following subwoofers are set to Slave mode.
Is this answer helpful?
The subwoofer has two power modes: On, where it remains permanently on, and Auto, where it activates automatically when a signal is detected and switches to standby after 15-20 minutes of inactivity.
Is this answer helpful?
Use the Lowpass control on the rear panel to set the desired frequency between 50Hz and 150Hz. This allows you to define the frequency range the subwoofer will handle.
Is this answer helpful?
Yes, the subwoofer can be operated without the grille, but it is recommended to use the grille during normal use to prevent accidental damage or dirt settling on the woofer cone.
Is this answer helpful?
Check if the AC mains cable is connected, ensure the power switch is set to On, and verify that all signal cables are properly connected. If the issue persists, consult the troubleshooting guide in the manual.
Is this answer helpful?
Switch off the subwoofer and other system components. Clean the cabinet with a soft dry or slightly damp cloth and use a fine furniture brush to remove dust from the woofer diaphragms. Replace the fuse with the same type and rating if needed.
Is this answer helpful?
Product Description
Discover the Dynaudio 9S Subwoofer
Precision Bass for Studio Excellence
The Dynaudio 9S is a state-of-the-art subwoofer designed to deliver precise and deep bass, optimized specifically for professional studio environments. This subwoofer is the perfect companion for mixing and mastering music, ensuring that every low-frequency detail is reproduced with clarity and accuracy. With its sleek design and high-performance capabilities, the Dynaudio 9S is a must-have for any serious audio professional.
Key Features
Superior Sound Quality
The Dynaudio 9S is equipped with a 300mm long-throw woofer made from MSP (Magnesium Silicate Polymer) and a powerful 300W amplifier, ensuring that it delivers deep and controlled bass frequencies. The subwoofer's frequency response ranges from 22Hz to 175Hz, allowing it to handle the lowest notes with ease.
Flexible Connectivity
This subwoofer offers both LFE/Slave and SAT/SUB inputs, enabling you to connect it to a variety of audio systems. The LFE input is ideal for connecting the subwoofer to a home theater system, while the SAT/SUB input allows for connection to a full-range audio system. The subwoofer also features outputs for connecting additional subwoofers in a master-slave configuration, making it versatile and scalable.
Advanced Controls
The Dynaudio 9S comes with a range of controls to help you fine-tune your audio experience. The lowpass filter is adjustable from 50Hz to 150Hz, allowing you to set the perfect crossover point for your system. The phase switch lets you adjust the phase relationship between the subwoofer and your main speakers, ensuring seamless integration and optimal sound quality. Additionally, the highpass filter offers three settings: Flat, 60Hz, and 80Hz, to cut off low frequencies from the satellite speakers, enhancing the overall sound balance.
Easy Operation and Safety
Switching the subwoofer on is as simple as flipping the main power switch on the rear panel. The subwoofer features two power modes: On and Auto. In Auto mode, the subwoofer activates automatically when a music signal is detected and switches to standby after 15-20 minutes of inactivity. Safety features include a fuse for protection against electrical faults and clear instructions for safe installation and operation.
Robust Build Quality
Designed and engineered in Denmark, the Dynaudio 9S boasts a solid construction that ensures durability and longevity. The subwoofer's cabinet is built to minimize resonance, providing clean and undistorted bass. The protective grille helps prevent damage to the woofer cone, making it suitable for both studio and home environments.
Conclusion
The Dynaudio 9S is a high-performance subwoofer that offers precise bass reproduction, flexible connectivity, and advanced controls, making it an excellent addition to any professional studio setup. With its robust build quality and easy operation, this subwoofer is designed to meet the demands of audio professionals who require the best in sound quality and reliability.
Notes
- Always follow the safety instructions provided in the Dynaudio 9S manual to ensure safe operation.
- For optimal performance, use the subwoofer with Dynaudio's recommended accessories and setup configurations.\nThere are no reviews to summarize.
Search for 1. Mio Manuals online
Type-in Brand or Model