Dynaudio 18S Manual
PDF manual · 15 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Dynaudio 18S manual using AI
Get instant AI answers from your Dynaudio 18S manual
Ask anything about the Dynaudio 18S. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend 18S?
Yes NoFrequently Asked Questions
The 18S is a DSP-controlled active subwoofer designed for near-field and mid-field studio monitoring to augment full-range monitors with accurate, low-distortion bass and time-aligned integration.
Is this answer helpful?
DSP features include low-pass presets matched to Dynaudio models, generic low-pass options, three-band parametric EQ, and distance compensation that corrects timing and level differences when monitor and subwoofer distances to the listening position are entered.
Is this answer helpful?
No. The USB socket is intended solely for fault diagnosis and firmware updates and cannot be used for audio connections or playback.
Is this answer helpful?
The 18S provides 2x balanced XLR inputs and outputs and 2x unbalanced RCA (phono) inputs and outputs, enabling connection to balanced professional gear or unbalanced domestic sources and the ability to feed monitors or a second subwoofer.
Is this answer helpful?
Yes. Using two identically configured subwoofers can improve low-frequency stereo separation and average out room resonances, yielding smoother bass at the listening position.
Is this answer helpful?
Avoid exposure to moisture, ensure ventilation, disconnect mains during storms or long unused periods, and clean only with a soft brush or lint-free cloth. Refer servicing to qualified personnel for faults or internal repairs.
Is this answer helpful?
Placement affects bass balance: best results are typically between or near the main monitors. Moving the subwoofer toward walls increases bass level but can create uneven response; use the 18S DSP, distance settings, and parametric EQ plus experimentation to achieve the most even bass.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Precise DSP with distance compensation and parametric EQ for accurate integration with monitors.
- Twin opposed drivers and closed-box design minimize mechanical vibration and deliver tight bass.
- Balanced XLR and unbalanced RCA I/O plus outputs for chaining monitors or a second subwoofer.
- High-power 500 W amplifier provides deep extension to ~20 Hz with controlled dynamics.
- Rear-panel menu and rotary controller allow detailed on-site configuration and presets for Dynaudio models.
Disadvantages
- Heavy unit (20.5 kg) may require two people for safe unpacking and placement.
- USB port limited to firmware/diagnostics — not usable for audio streaming.
- Distance compensation requires monitors to be driven via the 18S outputs, limiting some routing setups.
- Room placement can still produce uneven bass; may require experimentation or two subs to smooth modes.
- No onboard automatic room measurement; EQ relies on manual parametric adjustments and external analysis.
Product Specification
Woofers
2x 9.50"/9.50in
Amplification
active
Design
Side-firing
Frequency Range
16Hz-230Hz
Power
500W RMS
Dimensions
18.50x13.11x10.55in (WxHxD)
Weight
47.40 lb
Product Description
Dynaudio 18S — High‑Performance Active DSP Subwoofer
The Dynaudio 18S is a studio-grade active DSP subwoofer designed to extend and refine low-frequency performance for near-field and mid-field monitoring. Built with a closed-box architecture and twin opposed 200 mm drivers, the 18S focuses on low distortion, minimized cabinet vibration, and accurate bass reproduction. Its robust 500 W amplifier and DSP-driven processing deliver a measured frequency response beginning around 20 Hz, enabling deep, controlled bass that complements professional monitors and improves translation of low-end material.
Features and Practical Use
Featuring balanced XLR and unbalanced RCA inputs and outputs, the 18S integrates seamlessly into professional monitoring setups. The rear-panel menu, rotary controller and display provide precise configuration: distance compensation (for time alignment), input sensitivity, volume matching, selectable low-pass presets tailored to many Dynaudio models, and three-band parametric EQ for targeted room correction. Auto standby, trigger input for automation, and a USB port for firmware/service tasks round out its practical control set.
Placement is forgiving compared to full-range monitors, but the manual recommends positioning between or near the main monitors for optimal imaging and even bass. The DSP can compensate for timing and level differences when distances to the listening position are entered. Two identically configured subwoofers can improve stereo bass performance and smooth room-mode effects.
Build, Safety and Maintenance
Robustly constructed and assembled in Denmark, the 18S ships with a mains cable and document pack. Follow standard safety guidance: avoid moisture, ensure proper ventilation, and disconnect mains for service. Cleaning requires a lint-free cloth or soft brush; avoid vacuuming and apply cleaning agents to cloths, not the cabinet.
Who It’s For
Engineers, producers, and serious home-studio owners who require accurate, tunable low-frequency monitoring will benefit from the 18S. Its DSP tools and professional connectivity make it suitable for critical listening, mixing, and mastering where reliable bass behaviour and integration with existing monitors are essential.
Notes
- The USB port is for diagnostics and firmware only, not audio playback.
- Distance compensation works only when monitors are driven via the 18S outputs.
- Use two subwoofers for improved low-frequency stereo performance and to average room resonances.
Search for 67,706 Manuals online
Type-in Brand or Model