Manual.ly Logo

DT Swiss HU 1900 Spline Manual

0.0 · 0 Ratings

PDF manual · 85 Pages

English

M: gpt-5.6-terra
page

/ 85

Loading...
412a1415e1a779f6dbeff3d09559a5021234 page d
WHEELS- User Manual V2022.01
13
EN
Congratulations on the purchase of your new DT Swiss wheel! You have purchased a quality product
made by DT Swiss.
1. GENERAL INFORMATION
This user manual is intended for the user of the wheel. It includes information on the installation,
handling, maintenance and care of the wheels.
For further information and activities refer to www.dtswiss.com.
Users must read and understand this manual before using the component. Third-party users must
also be informed about the following provisions. Keep this user manual handy / for reference in case
you need to refer to it later.
2. SAFETY
DANGER
Incorrect handling, installation, maintenance or servicing can lead to accidents causing severe
injuries or death!
• Compliance with the following provisions is a prerequisite for accident-free use and faultless
performance.
• Assembly and maintenance of the wheels requires a basic knowledge of handling bicycle
components. If in any doubt, consult your retailer.
• The wheels should be used only in accordance with their intended use. Otherwise the user shall
assume responsibility.
• The maximum system weight of the wheels must not be exceeded.
• The maximum tire pressure of the wheel and of the tire used must not be exceeded.
• The wheels must be compatible with all parts of the bicycle.
• Only use original DT Swiss spare parts.
• The wheels must not be changed or modied.
• Check that the wheel is attached correctly before each ride.
• Regularly check the spoke tension, dish and wear of the wheel.
• Check the wheel for damage before and after each ride.
• The wheels must not be used if they are damaged or there are any signs of damage. If in any
doubt, consult your retailer.
DANGER
Risk of accident due to worn Tubeless Ready Tape!
If the Tubeless Ready Tape is worn, there is a risk of sudden tire pressure loss which can lead to
accidents with serious injuries or even death.
• Check Tubeless Ready Tape every three months for signs of wear (see also “5. Service and care”
on page 19).
• The wheels must not be used if they are damaged or there are any signs of damage. If in any
doubt, consult your retailer.

Chat with your DT Swiss HU 1900 Spline manual using AI

Get instant AI answers from your DT Swiss HU 1900 Spline manual

Ask anything about the DT Swiss HU 1900 Spline. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend HU 1900 Spline?

Yes No

Frequently Asked Questions

A

It is identified as a 29-inch rear wheel with a 5x135 mm rear axle standard and a Center Lock brake mounting interface. Confirm your frame dropout, axle hardware, cassette system, and rotor compatibility before fitting it.

Is this answer helpful?

A

The 25 mm designation is used to identify the rim-width configuration. Tire choice must follow tire and rim manufacturer guidance. Use only tire widths listed as possible or recommended for the rim, and observe the lower applicable pressure limit.

Is this answer helpful?

A

A tubeless setup requires compatible Tubeless Ready tape, a suitable valve, compatible tire, and appropriate sealant. Check the tire bead seating around the entire rim and never exceed the lower maximum pressure stated by the tire or rim.

Is this answer helpful?

A

Install a compatible Center Lock rotor according to its manufacturer instructions. If using a DT Swiss Center Lock adapter for a 6-bolt rotor, use every adapter part as a complete assembly and tighten the lockring to 40 Nm.

Is this answer helpful?

A

Check wheel attachment and tire pressure before every ride. Inspect for damage before and after every ride. Check spoke tension, trueness, and wear every 10 operating hours. Inspect tubeless tape every three months and replace it annually or earlier when worn.

Is this answer helpful?

A

Use a soft sponge or cloth with a suitable cleaner after riding. Do not use a pressure washer or aggressive cleaning products. For storage longer than one month, reduce tire pressure, remove sealant, clean away salt, and keep the wheel protected from heat and impacts.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • 29-inch rear-wheel format suits compatible mountain bike and trekking-style builds.
  • 5x135 mm rear axle specification provides a clear frame compatibility reference.
  • Center Lock interface supports clean rotor installation with compatible brake components.
  • 25 mm rim-width designation helps guide tire selection and pressure planning.
VS

Disadvantages

  • Compatibility with cassette body, frame, axle, rotor, and tire must be verified before purchase.
  • Tubeless performance depends on the tire, tape, valve, sealant, and correct installation.
  • Regular inspections are required for spoke condition, wheel damage, pressure, and rotor security.
  • The supplied material does not confirm weight, hub engagement, spoke count, or included accessories.
M: gpt-5.6-terra

Product Specification

Type

Rear wheel

Color

Black

Wheel size

29 in

Tire type

Wire/folding tire (clincher)

Material

Aluminum

Rim height

0.87 in

Rim width

0.98 in internal, 1.38 in external

Rear installation width

5 x 135 mm QR

Brake type

Disc brake (Center Lock)

Spoking

Straight-pull

Valve hole

Schrader/Auto/Dunlop/Blitz valve (0.33 in)

Freehub

Ratchet freehub (18 teeth)

Freehub body

Shimano/SRAM (MTB)

Weight

2.71 lb

M: gpt-5.6-terra

Product Description

DT Swiss HU 1900 Spline 29 25mm 5x135mm Centerlock Rear Wheel - Read, Download & Print Free

The DT Swiss HU 1900 Spline 29 25mm 5x135mm Centerlock Rear Wheel is a purpose-focused rear wheel option for riders who need a 29-inch platform with a 5x135 mm rear axle standard and Center Lock brake interface. Its product designation highlights the key compatibility points that should be matched carefully to the bicycle frame, drivetrain, brake rotor, tire, and intended riding category.

Built Around Careful Compatibility

A rear wheel has a major role in power transfer, braking performance, and ride confidence. The HU 1900 Spline format is designed for riders seeking DT Swiss wheel engineering in a configuration that can be integrated into an appropriate bike build. Before installation, confirm the frame dropout size, axle system, cassette body compatibility, rotor type, and tire dimensions.

The 25 mm rim-width designation gives this wheel an important place in tire selection planning. Tire and rim widths must be paired correctly to support stable tire seating, predictable handling, and safe pressure limits. Both tube-type and tubeless setups require compatible components, including the correct rim tape, valve, tire, and, for tubeless use, a sealant that does not promote corrosion.

Center Lock Braking and Setup Care

The Center Lock interface supports compatible brake rotors installed according to the rotor manufacturer's instructions. Brake components must be inspected regularly, and any damaged rotor or adapter should be replaced immediately. When using a Center Lock adapter for a 6-bolt rotor, it must be used as a complete assembly. The specified lockring torque is 40 Nm.

Correct tire installation is equally important. Inflate only to the lower maximum pressure stated by the tire and rim, check that the bead is seated evenly around the complete rim, and then reduce pressure to the desired riding level. Never exceed applicable pressure or system-weight limits. These precautions help support dependable performance on every ride.

Maintenance Notes

Inspect wheel security and air pressure before each ride. Check for damage before and after riding, and do not continue using a wheel with visible damage or suspected faults. Spoke tension, wheel trueness, and wear should be checked at regular intervals. Tubeless Ready tape needs inspection every three months and replacement every 12 months, or sooner if it shows lifting print, wrinkles, or deformation around spoke holes.

Clean the wheel after rides with a soft cloth or sponge and suitable cleaner. Avoid pressure washers and aggressive chemicals. For storage longer than one month, lower tire pressure, remove sealant, clean off salt residue, and protect the wheel from unnecessary heat and impact.

Note: Professional assistance is recommended whenever compatibility, installation, wheel condition, or tire seating is uncertain.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly