Manual.ly Logo

DT Swiss CRC 1400 Spline 24 Manual

0.0 · 0 Ratings

PDF manual · 66 Pages

English

M: OA-GPT-54-NAN
page

/ 66

Loading...
033545680175690ab2c8b88deb2937d8032f page 8
SPLINE
®
- Technical Manual
7
Safety
V2017.07
2Safety
DANGER
Incorrect handling, installation, maintenance or servicing can lead to accidents causing severe
injuries or death!
• Compliance with the following provisions is a prerequisite for accident-free use and faultless func-
tioning.
• Assembly and maintenance of the component requires a basic knowledge of handling bicycle com-
ponents. If in any doubt, consult your retailer.
• Components should only be used in accordance with their intended use, otherwise the user shall
assume full responsibility.
• The component must be compatible with all parts of the bicycle.
• Only use original spare parts.
• The components must not be changed or modified.
• The component must not be used if it is damaged or there are any signs of damage. If in any doubt,
consult a DT Swiss service center.
DANGER
Risk of death caused by incorrectly assembled or faulty wheels and hubs!
• Check that the wheel is connected correctly before each ride.
• Before every use, check the function of the rear wheel hub. Make sure that the freewheel and en-
gagement connection function impeccably. Should there be any malfunction, the rear wheel hub
must not be used.
• Check the wheel for damage before and after each ride.
• Regularly check the spoke tension, rotation and wear of the wheel.

Chat with your DT Swiss CRC 1400 Spline 24 manual using AI

Get instant AI answers from your DT Swiss CRC 1400 Spline 24 manual

Ask anything about the DT Swiss CRC 1400 Spline 24. Answers come from this manual, with the pages they are based on.

CRC 1400 Spline 24 Maintenance Schedule

Remind me when maintenance is due
Semiannual
Perform small hub service under extreme conditions

Disassemble, clean, and grease the hub components if riding frequently in rain, mud, or snow.

Show in the manual (page 28)
Yearly
Perform big hub service under extreme conditions

Conduct a comprehensive service of the hub including rotor and freewheel system if riding frequently in rain, mud, or snow.

Show in the manual (page 28)
Yearly
Perform big hub service under normal conditions

Conduct a comprehensive service of the hub including rotor and freewheel system for normal operating conditions.

Show in the manual (page 28)
Before and after each ride
Check the wheel for damages

Visually inspect the wheel for any signs of damage or wear before and after every ride.

After each ride
Clean the wheel

Clean the wheel with a soft cloth and an appropriate cleaner. Do not use high pressure cleaners or aggressive cleaners.

Show in the manual (page 41)
Every 10 hours of use
Check spoke tension, run-out and wear

Measure spoke tension and check radial and axial run-out to ensure the wheel is within tolerance limits.

Show in the manual (page 41)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend CRC 1400 Spline 24?

Yes No

Frequently Asked Questions

A

It combines a refined rear hub, reliable spoke construction, and a service-friendly design. The wheel is built for smooth performance, long-term durability, and compatibility with careful maintenance routines.

Is this answer helpful?

A

DT Swiss recommends a small service about every 6 months in normal use, or as needed in harsh conditions. A bigger service is typically suggested every 12 months, depending on riding conditions.

Is this answer helpful?

A

Yes, many DT Swiss SPLINE hub setups can be converted using the correct adapters or end caps. The exact options depend on the hub version and wheel generation.

Is this answer helpful?

A

The Ratchet system is designed for efficient engagement and smooth power transfer. It uses interlocking star ratchets that lock and release consistently when properly cleaned and greased.

Is this answer helpful?

A

For many tasks, yes. Truing, spoke replacement, and hub work often require DT Swiss-specific tools to avoid damaging bladed spokes, nipples, bearings, or end caps.

Is this answer helpful?

A

PHR stands for PRO HEAD Reinforcement. It uses a washer and special nipple to better align the spoke at the rim, helping reduce stress and support rim integrity.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Smooth hub engagement supports efficient power transfer and a responsive ride feel.
  • Convertible hub options improve compatibility with different axle standards.
  • Detailed maintenance guidance helps extend wheel life and preserve performance.
  • PHR and spoke-system design can improve durability and reduce stress points.
VS

Disadvantages

  • Proper servicing can require special tools and technical know-how.
  • Incorrect assembly or maintenance may void warranty coverage.
  • Routine upkeep is important, so ownership demands regular attention.
  • High-pressure or harsh cleaners are discouraged, limiting quick cleaning methods.
M: OA-GPT-54-NAN

Product Specification

Type

Rear wheel

Colors

black

Wheel size

29"

Tire type

Wire/folding tire (Clincher)

Material

Carbon

Rim height

0.94 in

Rim width

0.87 in inside, 1.10 in outside

Rear installation dimension

12x142 QR

Brake type

Disc brake (Centerlock)

Spoking

Straight-pull

Number of spokes

24

Freehub

Ratchet freehub (36T)

Freehub body

Shimano (Road)

Weight

1.69 lb

Features

Aero spokes, tubeless ready

M: OA-GPT-54-NAN

Product Description

DT Swiss CRC 1400 Spline 24 Rear Wheel: Precision Made Practical

The DT Swiss CRC 1400 Spline 24 Rear Wheel is designed for riders who want a fast, dependable rear wheel with a strong balance of performance and serviceability. It reflects the kind of engineering DT Swiss is known for: clean hub design, precise spoke behavior, and a build philosophy that supports long-term use rather than short-lived speed alone.

At the heart of this wheel is a rear hub platform that emphasizes smooth engagement and efficient power transfer. Whether the wheel is equipped with a Ratchet system or a Three Pawl setup, the result is a drivetrain feel that responds quickly and stays consistent when maintained correctly. That makes it appealing for riders who value a lively ride feel on road or mixed-surface adventures.

The DT Swiss CRC 1400 Spline 24 Rear Wheel Manual shows how much attention goes into upkeep, and that says a lot about the product itself. This wheel is not just built to roll well; it is built to be serviced, adjusted, and kept in top condition over time. From spoke tension checks to hub cleaning and end cap conversion, the design supports careful ownership and technical confidence.

Another standout detail is versatility. DT Swiss hubs can often be converted to different axle standards, which adds value for riders who may upgrade frames or swap setups later. The wheel also benefits from high-quality spoke systems and optional PHR reinforcement on certain builds, helping reduce stress at the nipple interface and supporting rim durability.

For everyday use, the wheel rewards routine attention. Regular inspections, proper cleaning, and correct truing help preserve alignment and extend component life. DT Swiss also makes it clear that the right tools matter, especially when working with bladed spokes, nipples, and hub components.

In short, the CRC 1400 Spline 24 Rear Wheel feels like a premium rear wheel with a mechanic-friendly mindset. It suits riders who want performance without losing sight of maintenance, compatibility, and long-term reliability.

Notes

  • Best results come from regular inspection and correct servicing.
  • Use original or approved parts only.
  • Special tools may be required for safe wheel work.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly