Manual.ly Logo

Dorr DLP-1000 Manual

0.0 · 0 Ratings

PDF manual · 23 Pages

English

M: QW-35-FL
page

/ 23

Loading...
430ad6e6cc817a813279377236d1d50ac40e page 5
05
08 | BETRIEB MIT LITHIUM IONEN AKKU
08.1 LIION AKKUS AUFLADEN
Vor dem ersten Betrieb mit Akku, laden Sie die Li-Ion Akkus (15) mit den mitge-
lieferten Ladegeräten (14) vollständig auf.
ACHTUNG
Laden Sie ausschließlich wiederaufladbare Lithium-Ionen Akkus des Typs
NP-F750 mit dem mitgelieferten Ladegerät auf! Das Ladegerät ist nicht zur Auf-
ladung anderer Akkutypen geeignet!
Verbinden Sie das Netzkabel (14e) mit der Anschlussbuchse (14d) am Ladegerät und
mit einer Steckdose. Die LED Ladeanzeige (14a) leuchtet grün.
Legen Sie den Li-Ion Akku (15) ca. mittig in den Ladeschacht (14c) ein und achten Sie
auf korrekte Polarität (Kennzeichnung +/- am Akku und im Ladeschacht). Schie-
ben Sie den Akku ganz nach vorne in die Akku-Anschlusspins (14b). Ist der Akku
korrekt eingelegt und der Ladevorgang gestartet, leuchtet die LED Ladeanzeige
(14a) rot. Nach vollständiger Aufladung leuchtet die LED Ladeanzeige (14a) grün.
Schieben Sie den Li-Ion Akku nach hinten und nehmen Sie ihn aus dem Lade-
schacht. Trennen Sie das Ladegerät von der Steckdose.
ACHTUNG
Lassen Sie das Ladegerät während des Ladevorgangs nicht unbeaufsichtigt.
Nach dem Ladevorgang trennen Sie das Ladegerät von der Steckdose.
HINWEIS
Falls das DLP-1000 Dauerlicht über einen längeren Zeitraum nicht benutzt wird,
laden Sie die Akkus auf ca. 60% auf um eine Tiefenentladung zu vermeiden.
08.2 LIION AKKUS EINLEGEN
ACHTUNG
Bevor Sie die Li-Ion Akkus einlegen oder abnehmen, stellen Sie sicher, dass das
Dauerlicht ausgeschaltet ist (Hauptschalter (7) auf Position O = Aus).
Legen Sie die Li-Ion Akkus (15) mit den Akku-Kontakten (15a) Richtung Akku-
Anschlusspins (5a) in die beiden Akkuschächte (5) ein. Schieben Sie die Akkus ganz
nach unten in die Akku- Anschlusspins (5a).
Zum Entnehmen der Li-Ion Akkus schieben Sie die Akkus nach oben und entneh-
men Sie sie aus den Akkuschächten.
09 | FERNBEDIENUNG
Legen Sie die beiden mitgelieferten AAA Batterien gemäß Polaritätskenn-
zeichnung +/- in das Batteriefach (13f) ein. Drücken Sie die Ein/Aus Taste (13d).
Display Anzeige (13a)
Nachfolgende Funktionen nur für Set Artikel Nr. 373482:
A CB
D FE
13.1
13.3
13.4
13.2
13.5
13.1) Batterieanzeige
13.2) Gruppenauswahl A - F
13.3) Kanalauswahl 1 - 50
13.4) Helligkeit 0 - 100 %
13.5) Farbtemperatur 3200 - 5500 K
Um das LED Dauerlicht mit der Fernbedienung zu koppeln, wählen Sie zunächst
am Dauerlicht eine Gruppe aus (A - F) aus. An der Fernbedienung drücken Sie die
Taste für Gruppenauswahl (13e). Mit den Einstelltasten +/- (13b) wählen Sie die-
selbe Gruppe wie am Dauerlicht eingestellt aus. Zum Bestätigen drücken Sie die
SET Taste (13c) an der Fernbedienung.
Mit den Einstelltasten +/- (13b) können Sie Ihre Einstellungen vornehmen, die Sie
mit der SET Taste (13c) bestätigen.
Durch zweimaliges Drücken der Taste für Gruppenauswahl (13e) gelangen Sie zur
Kanalauswahl 0 - 50.
Nach einigen Sekunden ohne Bedienung schaltet sich die Fernbedienung aus.
Drücken Sie die Ein/Aus Taste (13d) um die Fernbedienung wieder zu aktivieren.
HINWEIS
Nach Gebrauch schalten Sie das Dauerlicht am Hauptschalter (7) aus (Position O
= Aus) und trennen Sie die Stromverbindung. Bei Betrieb mit Akkus, entnehmen
Sie bitte die Akkus, wenn das Dauerlicht länger nicht in Betrieb ist.
10 | REINIGUNG UND AUFBEWAHRUNG
Reinigen Sie das Gerät nicht mit Benzin oder scharfen Reinigungsmitteln. Wir emp-
fehlen ein fusselfreies, leicht feuchtes Mikrofasertuch um die äußeren Bauteile des
Geräts zu reinigen. Vor der Reinigung schalten Sie das Gerät aus und trennen
Sie die Stromverbindung bzw. entnehmen Sie die Akkus. Bewahren Sie das Gerät
an einem staubfreien, trockenen, kühlen Platz auf. Das Gerät ist kein Spielzeug –
bewahren Sie es für Kinder unerreichbar auf. Halten Sie das Gerät von Haustieren
fern.
11 | TECHNISCHE DATEN
Anzahl LEDs 576 Bi-Color
Beleuchtungsstärke ca. 2500 Lux/1 m
Farbtemperatur 3200 - 5500 K
Ausgangsleistung 40 W
Farbwiedergabeindex (CRI) > 90 R
a
Betriebsspannung DC 15 V 3 A
Netzteil AC 100~240 V, 50/60 Hz DC 15 V 3 A
Abmessungen Leuchtfläche ca. 20 x 20 cm
Abmessungen ca. 28,5 x 32 x 6 cm
Gewicht ca. 1450 g
LED Dauerlicht DLP-1000 Bi-Color Set / Artikel Nr. 373482
Ladegerät für NP-F750
Eingangsstrom
Ausgangsstrom
Abmessungen
Gewicht
AC 100-240 V, 50/60 Hz
150 mA (max.)
DC 8,4 V/600 mA
ca. 8,5 x 4,6 x 4 cm
ca. 118 g
Akku
(Ersatz-) Sony NP-F750 Li-Ion Akku 7,2 V
4400 mAh (
31,68 Wh)
Fernbedienung
Frequenz
Batterien
2,4 GHz
2 x AAA Batterien (inklusive)
Leuchtenstativ max. Höhe ca. 215 cm

Chat with your Dorr DLP-1000 manual using AI

Get instant AI answers from your Dorr DLP-1000 manual

Ask anything about the Dorr DLP-1000. Answers come from this manual, with the pages they are based on.

DLP-1000 Maintenance Schedule

After each use
Switch off the LED light

Turn off the device at the main switch (position O) after every use to ensure safety and save power.

As needed
Clean outer parts with microfiber cloth

Use a soft, slightly damp lint-free microfiber cloth. Do not use benzine or aggressive cleansers. Disconnect power before cleaning.

Show in the manual (page 10)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend DLP-1000?

Yes No

Frequently Asked Questions

A

The DLP-1000 offers a continuous color temperature adjustment range from 3200 Kelvin for warm indoor lighting up to 5500 Kelvin for natural daylight simulation.

Is this answer helpful?

A

Yes, as long as they are high-quality Lithium-Ion batteries of the NP-F750 type. Using incompatible batteries may void warranties or cause safety issues.

Is this answer helpful?

A

Select a group (A-F) on the light, then press the group button on the remote, select the same group using +/- buttons, and confirm with the SET button.

Is this answer helpful?

A

No, the housing and barndoors become hot during operation. Always turn off the device and let it cool down completely before touching or storing it.

Is this answer helpful?

A

Yes, the DLP-1000 Set includes two light stands with a maximum height of approximately 215 cm for stable positioning.

Is this answer helpful?

A

The unit operates at 40 Watts and runs on a DC 15V 3A supply, ensuring efficient energy usage while delivering high brightness.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Infinitely adjustable color temperature from 3200K to 5500K
  • High CRI greater than 90 for accurate color rendering
  • Includes comprehensive set with remotes, batteries, and stands
  • Magnetic diffusion plates for quick setup and soft light
  • Bright output of 2500 Lux at one meter distance
VS

Disadvantages

  • Device housing gets hot during extended operation
  • Requires specific NP-F750 batteries which may be sold separately
  • Remote control requires separate AAA batteries
  • Not suitable for permanent room lighting applications
  • Sensitive to moisture and direct sunlight exposure
M: QW-35-FL

Product Specification

Light Output

3.24 Lux (1m)

Color Temperature

3200-5500K

Power

40W

Features

Battery

Dimensions

11.22x12.6x2.36in (WxHxD)

Weight

3.2lbs

M: QW-35-FL

Product Description

Elevate Your Visual Storytelling with the DLP-1000

The Door LED Continuous Light DLP-1000 Set is a professional-grade lighting solution designed for photographers and videographers who demand precision and versatility. This bi-color kit features 576 high-quality LEDs capable of producing brilliant light output, making it ideal for capturing stunning photos and videos in any environment. Whether you are shooting portraits, product photography, or video content, the DLP-1000 delivers consistent illumination that brings your creative vision to life.

Unmatched Flexibility and Control

One of the standout features of this continuous light is its fully adjustable color temperature range from 3200K to 5500K. This allows users to seamlessly switch between warm tungsten tones and cool daylight settings without needing external gels. The brightness is also infinitely dimmable from 0 to 100%, giving you complete control over the intensity of the light. An intuitive LCD display provides real-time feedback on brightness levels, color temperature, battery capacity, and channel selection, ensuring you never lose track of your settings.

Comprehensive Kit Contents

The DLP-1000 Set includes everything needed for immediate use. It comes with two powerful LED units, each equipped with magnetic mounts for quick attachment of white and orange diffusion plates. These diffusers help soften the light and reduce harsh shadows or add warmth to the scene. The set also includes four Li-Ion NP-F750 batteries, four chargers, two sturdy light stands, a remote control for wireless operation, and a carrying bag for easy transport. Safety is prioritized with clear warnings regarding eye protection, heat management, and proper battery handling.

Key Takeaways

This lighting system is perfect for studio work, location shoots, and live streaming. Its compact design and robust build ensure durability, while the inclusion of multiple accessories makes it a complete package. Users can easily pair the lights via group and channel selection on the remote, allowing for synchronized control of multiple units. Always remember to allow the unit to cool before storage to maintain longevity.

Important Notes

  • Do not look directly into the LED beam to avoid retinal damage.
  • Keep the device away from water and extreme temperatures.
  • Use only compatible NP-F750 batteries for optimal performance.
  • Dispose of batteries and electronic waste according to local regulations.
M: QW-35-FL

© Copyright 2026 Manual.ly