Doepke DFS 4 125 Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Doepke DFS 4 125 manual using AI
Get instant AI answers from your Doepke DFS 4 125 manual
Ask anything about the Doepke DFS 4 125. Answers come from this manual, with the pages they are based on.
DFS 4 125 Maintenance Schedule
Press test key T to verify device disconnects without delay. Replace immediately if tripping does not occur.
Repeat function test with test key T every working day for non-stationary systems according to regulations.
Free maintenance reminders
Timed to your purchase date. Always free, unsubscribe anytime.
Ask a Question
Do you recommend DFS 4 125?
Yes NoFrequently Asked Questions
AC/DC-sensitive means the device detects both alternating residual currents and pulsating DC fault currents, making it suitable for systems with frequency converters, inverters, and other electronic loads that can create non-sinusoidal leakage currents.
Is this answer helpful?
Under normal stationary use, perform the functional test at least every six months. For non-stationary or regulated installations, tests may be required daily or per local regulations. If the device fails to trip during the test, it must be replaced immediately.
Is this answer helpful?
For standard devices, insulation tests should follow DIN EN 61557-2 and may require disconnecting the device to avoid erroneous readings. Some ISO HD variants allow insulation testing up to 1000 V on specified terminals without prior disconnection.
Is this answer helpful?
Electronic equipment and EMC measures (filters, shielded cables) can produce high capacitive or surge leakage currents. Excessive leakage or unfavorable EMC filter interactions can cause nuisance tripping; mitigating steps include changing filter settings, using sinus output filters, or reducing cable lengths.
Is this answer helpful?
No. The DFS 4 125 is a residual current protective device without integrated overcurrent protection and must be installed together with appropriate overcurrent devices according to system design and standards.
Is this answer helpful?
First check that a minimum operating voltage (about 50 V AC) is present between active conductors. If voltage is present and the LED remains off, the device should be replaced as AC/DC-sensitive detection may be inactive.
Is this answer helpful?
Yes. Aluminium conductors should be scraped and greased immediately before connection to ensure reliable contact and prevent oxidation-related connection issues.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- AC/DC-sensitive detection suitable for installations with electronic drives and inverters.
- Clear status indication and accessible test push-button for regular functional checks.
- Design allows simplified insulation testing when supplied to odd-numbered terminals (Type B).
Disadvantages
- Susceptible to nuisance tripping from high leakage currents generated by EMC filters or long shielded cables.
- Does not include overcurrent protection; requires coordination with upstream devices.
- Requires qualified installation and regular testing; not suitable for layperson installation.
Product Specification
Type
RCCB
Number of poles
3 + N
Rated voltage
400V
Rated current
125A
Degree of protection
IP20
Width
2.83 in
Modular units
4
Product Description
Doepke DFS 4 125 — Reliable AC/DC-Sensitive Residual Current Protection
The Doepke DFS 4 125 is a robust AC/DC-sensitive residual current circuit-breaker (RCCB) designed for demanding installations where reliable fault current detection and safe automatic disconnection are essential. Built for professional electrical use, the DFS 4 series provides sensitive detection of both AC and pulsating DC faults and integrates features that simplify testing, installation, and maintenance in industrial and commercial environments.
Key features and practical use
The DFS 4 125 supports all-pole and multi-pole installations, with clear terminal designation and wiring diagrams to ensure correct connections. Type B versions (AC/DC-sensitive) are recommended where electronic loads such as frequency converters and inverters are present. The device offers a visible status indicator under the toggle (red = closed, green = open) and an accessible test push-button that enables easy functional checks. For simplified insulation testing the preferred supply is to the odd-numbered terminals on Type B devices, reducing the need to disconnect downstream circuits.
Installation is intended for qualified electrical professionals and the breaker mounts on standard TS 35 DIN rails. Aluminium conductors should be scraped and greased before connection. The product is specified for environments free of corrosive gases; an HD variant is available for aggressive atmospheres. The device does not include overcurrent protection and must be combined with appropriate upstream overcurrent devices according to system requirements.
Interaction with electronic equipment
When used with electronic loads (frequency converters, inverters, EMC filters, shielded motor cables), the DFS 4 125 requires attention to leakage currents and EMC measures. Integrated or external EMC filters and long shielded cables can create capacitive leakage currents that may cause nuisance tripping. Measures include limiting downstream electronic devices to those specified by leakage current ratings, using sinus filters at frequency converter outputs, observing maximum shielded cable lengths (typically 5–10 m for converters with integrated EMC filters), and selecting appropriate switching devices to minimize long surge leakage during power-up.
Testing, maintenance, and warranty
Routine functional tests via the test key are recommended at least every six months (more frequently for non-stationary installations). If the device fails to trip during testing or cannot be switched on, it must be replaced. Insulation testing should follow DIN EN 61557-2 and, for certain ISO HD variants, insulation tests up to 1000 V can be done without disconnecting. The product includes a standard statutory warranty for professionally installed, unaltered devices; unauthorized opening voids the warranty.
Notes
- Intended for qualified electrical installers only.
- Do not use visibly damaged units; replace immediately if defective.
- Observe manufacturer specs for EMC filters and frequency converter cabling.
Search for 67,706 Manuals online
Type-in Brand or Model