Manual.ly Logo

D.A.S. Vantec-118A Manual

0.0 · 0 Ratings

PDF manual · 25 Pages

English

M: QW-35-FL
page

/ 25

Loading...
5b7bd6b63dc70df5023c618ba2fb126106ea page 3
3
Precauciones de Seguridad
Safety Precautions
Cajas acústicas activas / Self-powered loudspeaker enclosures
(VANTEC-20A, VANTEC-118A)
The exclamation point inside an equilateral triangle is intended to
alert the users to the presence of important operating and
ma in tenance ( se rvicing) i ns tr uc tions in the literature
accompanying the product. Heed all warnings. Follow all
instructions. Keep these instructions.
WARNING: This is a class A product. In a domestic environment this
product may cause radio interferences in which case the user may
be required to take adequate measures.
Use this product only in E1, E2, E3 or E4 environments according to
EN55103-2.
Equipo diseñado para funcionar entre 15ºC y 45ºC con una
humedad relativa máxima del 95%, con un rango de ±10% de la
tensión nominal de alimentación indicada en la etiqueta trasera
(según IEC 60065). Si debe sustituir el fusible preste atención al tipo
y rango.
Working temperature ranges from 15ºC to 45ºC with a relative
humidity of 95%, with ±10% of the rated main voltage value
indicated on the rear label (according to IEC 60065). If the fuse
needs to be replaced, please pay attention to correct type and
ratings.
No instale el aparato cerca de ninguna fuente de calor como
radiadores, estufas u otros aparatos que produzcan calor. Debe
instalarse siempre sin bloquear la libre circulación de aire por las
aletas del radiador.
Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat. The circulation of air
through the heatsink must not be blocked.
No exponga este equipo a la lluvia o humedad. No use este aparato
cerca del agua (piscinas y fuentes, por ejemplo). No exponga el
equipo a salpicaduras ni coloque sobre él objetos que contengan
líquidos, tales como vasos y botellas. Equipo IP-20.
Do not expose this device to rain or moisture. Do not use this
apparatus near water (for example, swimming pools and fountains).
Do not place any objects containing liquids, such as bottles or
glasses, on the top of the unit. Do not splash liquids on the unit. IP-
20 equipment.
No emplace altavoces en proximidad a equipos sensibles a campos
magnéticos, tales como monitores de televisión o material
magnético de almacenamiento de datos.
Do not place loudspeakers in proximity to devices sensitive to
magnetic fields such as television monitors or data storage
magnetic material.
Este símbolo indica que el presente producto no puede ser tratado
como residuo doméstico normal, sino que debe entregarse en el
correspondiente punto de recogida de equipos eléctricos y
electrónicos.
This symbol on the product indicates that this product should not
be treated as household waste. Instead it shall be handed over to
the appicable collection point for the recycling of electrical and
electronic equipment.
El cableado exterior conectado al equipo requiere de su instalación
por una persona instruida o el uso de cables flexibles ya preparados.
The outer wiring connected to the device requires installation by an
instructed person or the use of a flexible cable already prepared.
Si el aparato es conectado permanentemente, la instalación
eléctrica del edificio debe incorporar un interruptor multipolar con
separación de contacto de al menos 3mm en cada polo.
If the apparatus is connected permanently, the electrical system of
the building must incorporate a multipolar switch with a separation
of contact of at least 3mm in each pole.
El colgado del equipo sólo debe realizarse utilizando los herrajes de
colgado recomendados y por personal cualificado. No cuelgue la
caja de las asas.
The appliance should be flown only from the rigging points and by
qualified personnel. Do not suspend the box from the handles.
Limpie con un paño seco. No use limpiadores con disolventes. Clean only with a dry cloth. Do not use any solvent based cleaners.
No existen partes ajustables por el usuario en el interior de este
equipo. Cualquier operación de mantenimiento o reparación debe
ser realizada por personal cualif icado. Es necesario el servicio
técnico cuando el equipo se haya dañado de alguna forma, como
que haya caído líquido o algún objeto en el interior del aparato, haya
sido expuesto a lluvia o humedad, no funcione correctamente, haya
recibido un golpe o su cable de red esté dañado.
No user serviceable parts inside. Refer all servicing to qualified
service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally or has been dropped.
Para las cajas con vaso para trípode, la altura máxima de seguridad
desde el suelo a la base de la caja montada sobre trípode modelo
TRD-2, con pies a 55 cm del eje del trípode, es:
For enclosures with tripod socket, the maximum safety height from
floor to bottom of enclosure when mounting on a TRD-2 tripod,
with legs spread 55cm from the central pole, is:
El signo de exclamación dentro de un triángulo indica la existencia
de importantes instrucciones de operación y mantenimiento en la
documentación que acompaña al producto.
Conserve y lea todas estas instrucciones. Siga las advertencias.
ATENCIÓN: Es un producto clase A, por lo que en entornos
domésticos puede causar radio-interferencias, en cuyo caso el
usuario tendrá que tomar las medidas oportunas.
De acuerdo con EN55103-2, usar el equipo sólo en entornos E1, E2, E3
ó E4.
55 cm
VANTEC-20A ------------->150 cm
Para desconectar el dispositivo debe usar el enchufe. Desconecte
este aparato durante tormentas eléctricas, terremotos o cuando no
se vaya a emplear durante largos periodos.
To disconnect the device, you should use the mains plug. Unplug
this apparatus during lightning storms, earthquakes or when
unused for long periods of time.
No desconecte la tierra en el conector de alimentación pues es
peligroso e ilegal. Equipo de Clase I. El producto debe ser conectado
a un enchufe con toma de tierra. Sólo use este equipo con el cable
de red de alimentación adecuado para su país.
El signo del rayo con la punta de flecha, alerta contra la presencia de
voltajes peligrosos no aislados. Para reducir el riesgo de choque
eléctrico, no retire la cubierta.
Do not remove mains connector ground, it is dangerous and illegal.
Class I device. The product must be connected to a mains socket
outlet with protective earth connection. Only use this equipment
with an appropriate mains cord for your country.
The lightning and arrowhead symbol warns about the presence of
uninsulated dangerous voltage. To reduce the risk of electric shock,
do not remove the cover.
VANTEC-20A ------------->150 cm
Manual del Usuario / vantec series / User’s Manual

Chat with your D.A.S. Vantec-118A manual using AI

Get instant AI answers from your D.A.S. Vantec-118A manual

Ask anything about the D.A.S. Vantec-118A. Answers come from this manual, with the pages they are based on.

Vantec-118A Maintenance Schedule

Regularly
Inspect hanging hardware and replace suspect units

Hanging hardware should be regularly inspected and suspect units replaced if in doubt to avoid injury. Implement an inspection and maintenance program on flying elements.

Show in the manual (page 19)
As needed
Clean enclosure with a dry cloth

Clean only with a dry cloth. Do not use any solvent based cleaners.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Vantec-118A?

Yes No

Frequently Asked Questions

A

The equipment is designed to function between 15 degrees Celsius and 45 degrees Celsius with a relative humidity of 95%. It should not be exposed to rain or moisture.

Is this answer helpful?

A

Yes, the rigging system is compatible with the Vantec-20A. You can create arrays or stacks using the included hardware and safety pins.

Is this answer helpful?

A

Access the Options menu via the DAScontrol encoder. Select Reset Device to restore default values for settings like Number Of Units and High Pass Filter.

Is this answer helpful?

A

Yes, it has an IP-20 rating, meaning it is protected against solid objects but not water. It is safe for indoor professional environments.

Is this answer helpful?

A

All products are warranted against any manufacturing defect for a period of 24 months from the date of purchase by an authorized dealer.

Is this answer helpful?

A

Use the balanced XLR input connectors on the rear panel. Ensure the cable is not too long to avoid interference issues.

Is this answer helpful?

A

Use only qualified personnel and certified flying accessories. Calculate working load limits and inspect rigging elements regularly for fatigue.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High 2000Wpeak Class D Amplifier Power
  • Deep-Loud Bass EQ Switch
  • Integrated Rigging System Compatibility
  • DSP with Variable Low-Pass Filter
  • Robust Baltic Birch Plywood Enclosure
VS

Disadvantages

  • Heavy Weight of 45.2 Kilograms
  • Class A Product May Cause Radio Interference
  • Requires Qualified Personnel for Rigging
  • Not User Serviceable Internally
  • Stricter Safety Regulations for Flying
M: QW-35-FL

Product Specification

Subwoofer

1x 18"

Amplifier

Active

Frequency Range

35Hz-125Hz (-10dB)

Power

1,000W RMS, 2,000W Peak

Max SPL

134dB

Dimensions

24.02x19.09x30.71 in (WxHxD)

Weight

99.65 lbs

M: QW-35-FL

Product Description

Professional Audio Power with the D.A.S. Vantec-118A

Unleash Deep Bass Performance

The D.A.S. Vantec-118A Piece stands as a powerhouse in modern professional audio reinforcement systems. This active front-loaded subwoofer system delivers exceptional low-end performance suitable for diverse live event applications and large venues. Whether for corporate events or permanent installations, this unit provides the necessary depth without compromising clarity on stage. The enclosure features a robust 118FW transducer driven by a Class D amplifier rating of two thousand watts peak power. This configuration ensures deep thunderous bass output while maintaining efficiency and reliability.

Digital Control and Connectivity

Audio engineers value the onboard digital signal processing capabilities significantly. A unique Deep-Loud bass EQ switch allows users to tailor the frequency response dynamically. Select Deep for subwoofer type response or Loud for hitting performances during concerts. The variable low-pass filter ranges from 80 Hz to 125 Hz for precise alignment with highs. This eliminates the need for external processing when paired with companion top speakers seamlessly.

Structural Integration and Safety

Integration is seamless thanks to the integrated rigging system included in the design. The unit connects easily to Vantec-20A satellite speakers for complete sound arrays. Stacking or flying options expand versatility for any venue size requirement. Power connections utilize reliable PowerCon connectors to ensure stable electrical flow. Signal routing is simplified with balanced XLR inputs and loop-thru outputs for daisy chaining multiple units together efficiently.

Durability and Maintenance Standards

Durability is a hallmark of this equipment manufacturing process. The enclosure is crafted from Baltic birch plywood with a protective ISO-flex finish. Safety precautions are noted regarding moisture and temperature ranges during operation. Class A compliance ensures electromagnetic compatibility in professional settings without interference. A two-year warranty covers manufacturing defects against improper use conditions effectively.

Installation and Operational Safety

Final notes on installation emphasize structural safety for flown configurations strictly. Qualified installers must verify loadbearing capabilities of ceiling supports before rigging. The unit works best when connected to ground power outlets for safety. Regular inspections of flying elements prevent accidents during use phases. This piece completes the Vantec series ecosystem perfectly for large scale audio setups.

Control Panel Features

Operators appreciate the rear panel LED indicators for power status and signal presence. Visual feedback helps troubleshoot issues quickly during events. The ON switch is conveniently located on the backplate. This design minimizes operator error during setup phases. Adjusting polarity ensures phase coherence for optimal sound quality.

M: QW-35-FL

© Copyright 2026 Manual.ly